From: Shaohui Xie Date: Tue, 30 Dec 2014 08:28:21 +0000 (+0800) Subject: net/fsl: remove hardcoded clock setting from xgmac_mdio X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=05930b5ec1d3b2a5c76e1959b54cae15587009c7;p=linux-beck.git net/fsl: remove hardcoded clock setting from xgmac_mdio There is no need to set the clock speed in read/write which will be performed unnecessarily for each mdio access. Init it during probe is enough. Also, the hardcoded clock value is not a proper way for all SoCs. Signed-off-by: Shaohui Xie Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/freescale/xgmac_mdio.c b/drivers/net/ethernet/freescale/xgmac_mdio.c index 9de526891da0..a35244586a63 100644 --- a/drivers/net/ethernet/freescale/xgmac_mdio.c +++ b/drivers/net/ethernet/freescale/xgmac_mdio.c @@ -94,13 +94,6 @@ static int xgmac_mdio_write(struct mii_bus *bus, int phy_id, int regnum, u16 val uint16_t dev_addr = regnum >> 16; int ret; - /* Setup the MII Mgmt clock speed */ - out_be32(®s->mdio_stat, MDIO_STAT_CLKDIV(100)); - - ret = xgmac_wait_until_free(&bus->dev, regs); - if (ret) - return ret; - /* Set the port and dev addr */ out_be32(®s->mdio_ctl, MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr)); @@ -135,13 +128,6 @@ static int xgmac_mdio_read(struct mii_bus *bus, int phy_id, int regnum) uint16_t value; int ret; - /* Setup the MII Mgmt clock speed */ - out_be32(®s->mdio_stat, MDIO_STAT_CLKDIV(100)); - - ret = xgmac_wait_until_free(&bus->dev, regs); - if (ret) - return ret; - /* Set the Port and Device Addrs */ mdio_ctl = MDIO_CTL_PORT_ADDR(phy_id) | MDIO_CTL_DEV_ADDR(dev_addr); out_be32(®s->mdio_ctl, mdio_ctl);