From: Gavin Shan Date: Tue, 9 Feb 2016 04:50:21 +0000 (+1100) Subject: powerpc/eeh: Fix stale cached primary bus X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=05ba75f84864;p=linux-beck.git powerpc/eeh: Fix stale cached primary bus When PE is created, its primary bus is cached to pe->bus. At later point, the cached primary bus is returned from eeh_pe_bus_get(). However, we could get stale cached primary bus and run into kernel crash in one case: full hotplug as part of fenced PHB error recovery releases all PCI busses under the PHB at unplugging time and recreate them at plugging time. pe->bus is still dereferencing the PCI bus that was released. This adds another PE flag (EEH_PE_PRI_BUS) to represent the validity of pe->bus. pe->bus is updated when its first child EEH device is online and the flag is set. Before unplugging in full hotplug for error recovery, the flag is cleared. Fixes: 8cdb2833 ("powerpc/eeh: Trace PCI bus from PE") Cc: stable@vger.kernel.org #v3.11+ Reported-by: Andrew Donnellan Reported-by: Pradipta Ghosh Signed-off-by: Gavin Shan Tested-by: Andrew Donnellan Signed-off-by: Michael Ellerman --- diff --git a/arch/powerpc/include/asm/eeh.h b/arch/powerpc/include/asm/eeh.h index c5eb86f3d452..867c39b45df6 100644 --- a/arch/powerpc/include/asm/eeh.h +++ b/arch/powerpc/include/asm/eeh.h @@ -81,6 +81,7 @@ struct pci_dn; #define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */ #define EEH_PE_CFG_RESTRICTED (1 << 9) /* Block config on error */ #define EEH_PE_REMOVED (1 << 10) /* Removed permanently */ +#define EEH_PE_PRI_BUS (1 << 11) /* Cached primary bus */ struct eeh_pe { int type; /* PE type: PHB/Bus/Device */ diff --git a/arch/powerpc/kernel/eeh_driver.c b/arch/powerpc/kernel/eeh_driver.c index 8d14feb40f12..f69ecaa7ce33 100644 --- a/arch/powerpc/kernel/eeh_driver.c +++ b/arch/powerpc/kernel/eeh_driver.c @@ -564,6 +564,7 @@ static int eeh_reset_device(struct eeh_pe *pe, struct pci_bus *bus) */ eeh_pe_state_mark(pe, EEH_PE_KEEP); if (bus) { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); pci_lock_rescan_remove(); pcibios_remove_pci_devices(bus); pci_unlock_rescan_remove(); @@ -803,6 +804,7 @@ perm_error: * the their PCI config any more. */ if (frozen_bus) { + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); eeh_pe_dev_mode_mark(pe, EEH_DEV_REMOVED); pci_lock_rescan_remove(); @@ -886,6 +888,7 @@ static void eeh_handle_special_event(void) continue; /* Notify all devices to be down */ + eeh_pe_state_clear(pe, EEH_PE_PRI_BUS); bus = eeh_pe_bus_get(phb_pe); eeh_pe_dev_traverse(pe, eeh_report_failure, NULL); diff --git a/arch/powerpc/kernel/eeh_pe.c b/arch/powerpc/kernel/eeh_pe.c index ca9e5371930e..98f81800e00c 100644 --- a/arch/powerpc/kernel/eeh_pe.c +++ b/arch/powerpc/kernel/eeh_pe.c @@ -928,7 +928,7 @@ struct pci_bus *eeh_pe_bus_get(struct eeh_pe *pe) bus = pe->phb->bus; } else if (pe->type & EEH_PE_BUS || pe->type & EEH_PE_DEVICE) { - if (pe->bus) { + if (pe->state & EEH_PE_PRI_BUS) { bus = pe->bus; goto out; } diff --git a/arch/powerpc/platforms/powernv/eeh-powernv.c b/arch/powerpc/platforms/powernv/eeh-powernv.c index 5f152b95ca0c..87f47e55aab6 100644 --- a/arch/powerpc/platforms/powernv/eeh-powernv.c +++ b/arch/powerpc/platforms/powernv/eeh-powernv.c @@ -444,9 +444,12 @@ static void *pnv_eeh_probe(struct pci_dn *pdn, void *data) * PCI devices of the PE are expected to be removed prior * to PE reset. */ - if (!edev->pe->bus) + if (!(edev->pe->state & EEH_PE_PRI_BUS)) { edev->pe->bus = pci_find_bus(hose->global_number, pdn->busno); + if (edev->pe->bus) + edev->pe->state |= EEH_PE_PRI_BUS; + } /* * Enable EEH explicitly so that we will do EEH check