From: Matthew R. Ochs Date: Fri, 2 Sep 2016 20:40:03 +0000 (-0500) Subject: scsi: cxlflash: Improve EEH recovery time X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=05dab43230fdc0d14ca885b473a2740fe017ecb1;p=linux-beck.git scsi: cxlflash: Improve EEH recovery time When an EEH occurs during device initialization, the port timeout logic can cause excessive delays as MMIO reads will fail. Depending on where they are experienced, these delays can lead to a prolonged reset, causing an unnecessary triggering of other timeout logic in the SCSI stack or user applications. To expedite recovery, the port timeout logic is updated to decay the timeout at a much faster rate when in the presence of a likely EEH frozen event. Signed-off-by: Matthew R. Ochs Acked-by: Uma Krishnan Signed-off-by: Martin K. Petersen --- diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c index 4ef523505364..42970a40d49b 100644 --- a/drivers/scsi/cxlflash/main.c +++ b/drivers/scsi/cxlflash/main.c @@ -1040,6 +1040,8 @@ static int wait_port_online(__be64 __iomem *fc_regs, u32 delay_us, u32 nretry) do { msleep(delay_us / 1000); status = readq_be(&fc_regs[FC_MTIP_STATUS / 8]); + if (status == U64_MAX) + nretry /= 2; } while ((status & FC_MTIP_STATUS_MASK) != FC_MTIP_STATUS_ONLINE && nretry--); @@ -1071,6 +1073,8 @@ static int wait_port_offline(__be64 __iomem *fc_regs, u32 delay_us, u32 nretry) do { msleep(delay_us / 1000); status = readq_be(&fc_regs[FC_MTIP_STATUS / 8]); + if (status == U64_MAX) + nretry /= 2; } while ((status & FC_MTIP_STATUS_MASK) != FC_MTIP_STATUS_OFFLINE && nretry--);