From: Luis R. Rodriguez Date: Wed, 7 Dec 2011 16:20:07 +0000 (+0530) Subject: cfg80211: allow following country IE power for custom regdom cards X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=061acaae76dfb760f4f3fddf0cde43915b7d673c;p=linux-beck.git cfg80211: allow following country IE power for custom regdom cards By definition WIPHY_FLAG_STRICT_REGULATORY was intended to allow the wiphy to adjust itself to the country IE power information if the card had no regulatory data but we had no way to tell cfg80211 that if the card also had its own custom regulatory domain (these are typically custom world regulatory domains) that we want to follow the country IE's noted values for power for each channel. We add support for this and document it. This is not a critical fix but a performance optimization for cards with custom regulatory domains that associate to an AP with sends out country IEs with a higher EIRP than the one on the custom regulatory domain. In practice the only driver affected right now are the Atheros drivers as they are the only drivers using both WIPHY_FLAG_STRICT_REGULATORY and WIPHY_FLAG_CUSTOM_REGULATORY -- used on cards that have an Atheros world regulatory domain. Cards that have been programmed to follow a country specifically will not follow the country IE power. So although not a stable fix distributions should consider cherry picking this. Cc: compat@orbit-lab.org Cc: Paul Stewart Cc: Rajkumar Manoharan Cc: Senthilkumar Balasubramanian Reported-by: Rajkumar Manoharan Signed-off-by: Luis R. Rodriguez Signed-off-by: John W. Linville --- diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 5eda5933ae01..9f85fca0b676 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -1699,7 +1699,9 @@ struct cfg80211_ops { * regulatory domain no user regulatory domain can enable these channels * at a later time. This can be used for devices which do not have * calibration information guaranteed for frequencies or settings - * outside of its regulatory domain. + * outside of its regulatory domain. If used in combination with + * WIPHY_FLAG_CUSTOM_REGULATORY the inspected country IE power settings + * will be followed. * @WIPHY_FLAG_DISABLE_BEACON_HINTS: enable this if your driver needs to ensure * that passive scan flags and beaconing flags may not be lifted by * cfg80211 due to regulatory beacon hints. For more information on beacon diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 2f5b0505c95d..481caafc6ba5 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -873,10 +873,22 @@ static void handle_channel(struct wiphy *wiphy, chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, (int) MBI_TO_DBI(power_rule->max_antenna_gain)); - if (chan->orig_mpwr) - chan->max_power = min(chan->orig_mpwr, - (int) MBM_TO_DBM(power_rule->max_eirp)); - else + if (chan->orig_mpwr) { + /* + * Devices that have their own custom regulatory domain + * but also use WIPHY_FLAG_STRICT_REGULATORY will follow the + * passed country IE power settings. + */ + if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE && + wiphy->flags & WIPHY_FLAG_CUSTOM_REGULATORY && + wiphy->flags & WIPHY_FLAG_STRICT_REGULATORY) { + chan->max_power = + MBM_TO_DBM(power_rule->max_eirp); + } else { + chan->max_power = min(chan->orig_mpwr, + (int) MBM_TO_DBM(power_rule->max_eirp)); + } + } else chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); }