From: Jay Vosburgh Date: Thu, 23 Jun 2016 21:20:51 +0000 (-0700) Subject: bonding: fix 802.3ad aggregator reselection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0622cab0341cac6b30da177b0faa39fae0680e71;p=linux-beck.git bonding: fix 802.3ad aggregator reselection Since commit 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated."), the logic in bonding to handle selection between multiple aggregators has not functioned. This affects only configurations wherein the bonding slaves connect to two discrete aggregators (e.g., two independent switches, each with LACP enabled), thus creating two separate aggregation groups within a single bond. The cause is a change in 7bb11dc9f59d to no longer set AD_PORT_BEGIN on a port after a link state change, which would cause the port to be reselected for attachment to an aggregator as if were newly added to the bond. We cannot restore the prior behavior, as it contradicts IEEE 802.1AX 5.4.12, which requires ports that "become inoperable" (lose carrier, setting port_enabled=false as per 802.1AX 5.4.7) to remain selected (i.e., assigned to the aggregator). As the port now remains selected, the aggregator selection logic is not invoked. A side effect of this change is that aggregators in bonding will now contain ports that are link down. The aggregator selection logic does not currently handle this situation correctly, causing incorrect aggregator selection. This patch makes two changes to repair the aggregator selection logic in bonding to function as documented and within the confines of the standard: First, the aggregator selection and related logic now utilizes the number of active ports per aggregator, not the number of selected ports (as some selected ports may be down). The ad_select "bandwidth" and "count" options only consider ports that are link up. Second, on any carrier state change of any slave, the aggregator selection logic is explicitly called to insure the correct aggregator is active. Reported-by: Veli-Matti Lintu Fixes: 7bb11dc9f59d ("bonding: unify all places where actor-oper key needs to be updated.") Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c index b9304a295f86..ca81f46ea1aa 100644 --- a/drivers/net/bonding/bond_3ad.c +++ b/drivers/net/bonding/bond_3ad.c @@ -657,6 +657,20 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) } } +static int __agg_active_ports(struct aggregator *agg) +{ + struct port *port; + int active = 0; + + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (port->is_enabled) + active++; + } + + return active; +} + /** * __get_agg_bandwidth - get the total bandwidth of an aggregator * @aggregator: the aggregator we're looking at @@ -664,39 +678,40 @@ static void __set_agg_ports_ready(struct aggregator *aggregator, int val) */ static u32 __get_agg_bandwidth(struct aggregator *aggregator) { + int nports = __agg_active_ports(aggregator); u32 bandwidth = 0; - if (aggregator->num_of_ports) { + if (nports) { switch (__get_link_speed(aggregator->lag_ports)) { case AD_LINK_SPEED_1MBPS: - bandwidth = aggregator->num_of_ports; + bandwidth = nports; break; case AD_LINK_SPEED_10MBPS: - bandwidth = aggregator->num_of_ports * 10; + bandwidth = nports * 10; break; case AD_LINK_SPEED_100MBPS: - bandwidth = aggregator->num_of_ports * 100; + bandwidth = nports * 100; break; case AD_LINK_SPEED_1000MBPS: - bandwidth = aggregator->num_of_ports * 1000; + bandwidth = nports * 1000; break; case AD_LINK_SPEED_2500MBPS: - bandwidth = aggregator->num_of_ports * 2500; + bandwidth = nports * 2500; break; case AD_LINK_SPEED_10000MBPS: - bandwidth = aggregator->num_of_ports * 10000; + bandwidth = nports * 10000; break; case AD_LINK_SPEED_20000MBPS: - bandwidth = aggregator->num_of_ports * 20000; + bandwidth = nports * 20000; break; case AD_LINK_SPEED_40000MBPS: - bandwidth = aggregator->num_of_ports * 40000; + bandwidth = nports * 40000; break; case AD_LINK_SPEED_56000MBPS: - bandwidth = aggregator->num_of_ports * 56000; + bandwidth = nports * 56000; break; case AD_LINK_SPEED_100000MBPS: - bandwidth = aggregator->num_of_ports * 100000; + bandwidth = nports * 100000; break; default: bandwidth = 0; /* to silence the compiler */ @@ -1530,10 +1545,10 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best, switch (__get_agg_selection_mode(curr->lag_ports)) { case BOND_AD_COUNT: - if (curr->num_of_ports > best->num_of_ports) + if (__agg_active_ports(curr) > __agg_active_ports(best)) return curr; - if (curr->num_of_ports < best->num_of_ports) + if (__agg_active_ports(curr) < __agg_active_ports(best)) return best; /*FALLTHROUGH*/ @@ -1561,8 +1576,14 @@ static int agg_device_up(const struct aggregator *agg) if (!port) return 0; - return netif_running(port->slave->dev) && - netif_carrier_ok(port->slave->dev); + for (port = agg->lag_ports; port; + port = port->next_port_in_aggregator) { + if (netif_running(port->slave->dev) && + netif_carrier_ok(port->slave->dev)) + return 1; + } + + return 0; } /** @@ -1610,7 +1631,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, agg->is_active = 0; - if (agg->num_of_ports && agg_device_up(agg)) + if (__agg_active_ports(agg) && agg_device_up(agg)) best = ad_agg_selection_test(best, agg); } @@ -1622,7 +1643,7 @@ static void ad_agg_selection_logic(struct aggregator *agg, * answering partner. */ if (active && active->lag_ports && - active->lag_ports->is_enabled && + __agg_active_ports(active) && (__agg_has_partner(active) || (!__agg_has_partner(active) && !__agg_has_partner(best)))) { @@ -2133,7 +2154,7 @@ void bond_3ad_unbind_slave(struct slave *slave) else temp_aggregator->lag_ports = temp_port->next_port_in_aggregator; temp_aggregator->num_of_ports--; - if (temp_aggregator->num_of_ports == 0) { + if (__agg_active_ports(temp_aggregator) == 0) { select_new_active_agg = temp_aggregator->is_active; ad_clear_agg(temp_aggregator); if (select_new_active_agg) { @@ -2432,7 +2453,9 @@ void bond_3ad_adapter_speed_duplex_changed(struct slave *slave) */ void bond_3ad_handle_link_change(struct slave *slave, char link) { + struct aggregator *agg; struct port *port; + bool dummy; port = &(SLAVE_AD_INFO(slave)->port); @@ -2459,6 +2482,9 @@ void bond_3ad_handle_link_change(struct slave *slave, char link) port->is_enabled = false; ad_update_actor_keys(port, true); } + agg = __get_first_agg(port); + ad_agg_selection_logic(agg, &dummy); + netdev_dbg(slave->bond->dev, "Port %d changed link status to %s\n", port->actor_port_number, link == BOND_LINK_UP ? "UP" : "DOWN"); @@ -2499,7 +2525,7 @@ int bond_3ad_set_carrier(struct bonding *bond) active = __get_active_agg(&(SLAVE_AD_INFO(first_slave)->aggregator)); if (active) { /* are enough slaves available to consider link up? */ - if (active->num_of_ports < bond->params.min_links) { + if (__agg_active_ports(active) < bond->params.min_links) { if (netif_carrier_ok(bond->dev)) { netif_carrier_off(bond->dev); goto out;