From: Mike Frysinger Date: Sun, 21 Oct 2007 14:36:06 +0000 (+0800) Subject: Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per... X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=066954a3891d32198edad3b319792d8db6a6a575;p=linux-beck.git Blackfin arch: use "char bfin_board_name[]" rather than "char *bfin_board_name" per discussion on lkml as the former uses less storage Signed-off-by: Mike Frysinger Signed-off-by: Bryan Wu --- diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 34fbf93cc118..6b85145f8488 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -498,7 +498,7 @@ EXPORT_SYMBOL(get_sclk); */ static int show_cpuinfo(struct seq_file *m, void *v) { - char *cpu, *mmu, *fpu, *name, vendor[20], cache[30]; + char *cpu, *mmu, *fpu, *vendor, *cache; uint32_t revid; u_long cclk = 0, sclk = 0; @@ -508,17 +508,17 @@ static int show_cpuinfo(struct seq_file *m, void *v) mmu = "none"; fpu = "none"; revid = bfin_revid(); - name = bfin_board_name; cclk = get_cclk(); sclk = get_sclk(); switch (bfin_read_CHIPID() & CHIPID_MANUFACTURE) { - case(0xca): - strcpy(vendor, "AnalogDevices"); + case 0xca: + vendor = "Analog Devices"; break; default: - strcpy(vendor, "unknown"); + vendor = "unknown"; + break; } seq_printf(m, "processor\t: %d\n" @@ -544,22 +544,22 @@ static int show_cpuinfo(struct seq_file *m, void *v) /* Check Cache configutation */ switch (bfin_read_DMEM_CONTROL() & (1 << DMC0_P | 1 << DMC1_P)) { case ACACHE_BSRAM: - strcpy(cache, "dbank-A/B\t: cache/sram"); + cache = "dbank-A/B\t: cache/sram"; dcache_size = 16; dsup_banks = 1; break; case ACACHE_BCACHE: - strcpy(cache, "dbank-A/B\t: cache/cache"); + cache = "dbank-A/B\t: cache/cache"; dcache_size = 32; dsup_banks = 2; break; case ASRAM_BSRAM: - strcpy(cache, "dbank-A/B\t: sram/sram"); + cache = "dbank-A/B\t: sram/sram"; dcache_size = 0; dsup_banks = 0; break; default: - strcpy(cache, "unknown"); + cache = "unknown"; dcache_size = 0; dsup_banks = 0; break; @@ -639,7 +639,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) } #endif - seq_printf(m, "board name\t: %s\n", name); + seq_printf(m, "board name\t: %s\n", bfin_board_name); seq_printf(m, "board memory\t: %ld kB (0x%p -> 0x%p)\n", physical_mem_end >> 10, (void *)0, (void *)physical_mem_end); seq_printf(m, "kernel memory\t: %d kB (0x%p -> 0x%p)\n", diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 09fb624af5ac..3e884f3a8182 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -49,7 +49,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADDS-BF527-EZKIT"; +const char bfin_board_name[] = "ADDS-BF527-EZKIT"; /* * Driver needs to know address, irq and flag pin. diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index a57b52d207cd..1c5a86adfab7 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -42,7 +42,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "Bluetechnix CM BF533"; +const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 5c1e35d3c012..34b63920e272 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -43,7 +43,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADDS-BF533-EZKIT"; +const char bfin_board_name[] = "ADDS-BF533-EZKIT"; #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { diff --git a/arch/blackfin/mach-bf533/boards/generic_board.c b/arch/blackfin/mach-bf533/boards/generic_board.c index 9bc1f0d0ab50..310b7772c458 100644 --- a/arch/blackfin/mach-bf533/boards/generic_board.c +++ b/arch/blackfin/mach-bf533/boards/generic_board.c @@ -35,7 +35,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "UNKNOWN BOARD"; +const char bfin_board_name[] = "UNKNOWN BOARD"; #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 8975e06ea158..f84be4eabfd1 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -46,7 +46,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADDS-BF533-STAMP"; +const char bfin_board_name[] = "ADDS-BF533-STAMP"; #if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) static struct platform_device rtc_device = { diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 44dea05e1d03..52e2320307de 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -43,7 +43,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "Bluetechnix CM BF537"; +const char bfin_board_name[] = "Bluetechnix CM BF537"; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 6668c8e4a3fc..255da7a98481 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -49,7 +49,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "GENERIC Board"; +const char bfin_board_name[] = "GENERIC Board"; /* * Driver needs to know address, irq and flag pin. diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index f83a2544004d..87b808926789 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -47,7 +47,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "PNAV-1.0"; +const char bfin_board_name[] = "PNAV-1.0"; /* * Driver needs to know address, irq and flag pin. diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index f42ba3aa86d7..cc41f6c2ef4f 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -49,7 +49,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADDS-BF537-STAMP"; +const char bfin_board_name[] = "ADDS-BF537-STAMP"; /* * Driver needs to know address, irq and flag pin. diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 046e6d84bbfc..f5428a57b6e2 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -49,7 +49,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADSP-BF548-EZKIT"; +const char bfin_board_name[] = "ADSP-BF548-EZKIT"; /* * Driver needs to know address, irq and flag pin. diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index cd827a1b6ba1..97aeb43fd8b4 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -42,7 +42,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "Bluetechnix CM BF561"; +const char bfin_board_name[] = "Bluetechnix CM BF561"; #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) /* all SPI peripherals info goes here */ diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index 57e14edca8b1..059d516cec23 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -39,7 +39,7 @@ /* * Name the Board for the /proc/cpuinfo */ -char *bfin_board_name = "ADDS-BF561-EZKIT"; +const char bfin_board_name[] = "ADDS-BF561-EZKIT"; #define ISP1761_BASE 0x2C0F0000 #define ISP1761_IRQ IRQ_PF10 diff --git a/arch/blackfin/mach-bf561/boards/generic_board.c b/arch/blackfin/mach-bf561/boards/generic_board.c index 4dfea5da674c..46816be4b2ba 100644 --- a/arch/blackfin/mach-bf561/boards/generic_board.c +++ b/arch/blackfin/mach-bf561/boards/generic_board.c @@ -32,7 +32,7 @@ #include #include -char *bfin_board_name = "UNKNOWN BOARD"; +const char bfin_board_name[] = "UNKNOWN BOARD"; /* * Driver needs to know address, irq and flag pin. diff --git a/arch/blackfin/mach-bf561/boards/tepla.c b/arch/blackfin/mach-bf561/boards/tepla.c index c442eb23db5e..4a17c6da2a59 100644 --- a/arch/blackfin/mach-bf561/boards/tepla.c +++ b/arch/blackfin/mach-bf561/boards/tepla.c @@ -16,7 +16,7 @@ #include #include -char *bfin_board_name = "Tepla-BF561"; +const char bfin_board_name[] = "Tepla-BF561"; /* * Driver needs to know address, irq and flag pin. diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index a970781a0f98..a006353a4310 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -105,7 +105,7 @@ extern void led_disp_num(int); extern void led_toggle_num(int); extern void init_leds(void); -extern char *bfin_board_name __attribute__ ((weak)); +extern const char bfin_board_name[]; extern unsigned long wall_jiffies; extern unsigned long ipdt_table[]; extern unsigned long dpdt_table[];