From: Gregory CLEMENT Date: Thu, 8 Jun 2017 10:29:51 +0000 (+0200) Subject: arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot X-Git-Tag: v4.13-rc1~165^2~9^2~4 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=07d065abf93dbced17d189f7c830467ca559c81d;p=karo-tx-linux.git arm64: dts: marvell: armada-3720-db: Add vqmmc regulator for SD slot By adding this regulator, the SD cards are usable at higher speed protocols such as SDR104. This patch was tested with an SD HC card compatible with UHS-I. Signed-off-by: Gregory CLEMENT --- diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index eab3bc7e6382..9df0f06ce607 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -80,6 +80,20 @@ compatible = "usb-nop-xceiv"; vcc-supply = <&exp_usb3_vbus>; }; + + vcc_sd_reg1: regulator { + compatible = "regulator-gpio"; + regulator-name = "vcc_sd1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>; + gpios-states = <0>; + states = <1800000 0x1 + 3300000 0x0>; + enable-active-high; + }; }; /* Gigabit module on CON19(V2.0)/CON21(V1.4) */ @@ -164,6 +178,7 @@ cd-gpios = <&gpiosb 2 GPIO_ACTIVE_LOW>; bus-width = <4>; marvell,pad-type = "sd"; + vqmmc-supply = <&vcc_sd_reg1>; status = "okay"; };