From: Arnaud Patard (Rtp) <arnaud.patard@rtp-net.org>
Date: Mon, 20 Dec 2010 15:48:56 +0000 (+0100)
Subject: arch/arm/plat-mxc/ehci.c: fix errors/typos
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=08406f5;p=linux-beck.git

arch/arm/plat-mxc/ehci.c: fix errors/typos

This patch is fixing some issues :

- MXC_OTG_UCTRL_OPM_BIT is for USBCTRL register and not PHYCTRL register.
- the MXC_EHCI_WAKEUP_ENABLED check was only clearing the bits so never allows
  to set them.

Signed-off-by: Arnaud Patard <arnaud.patard@rtp-net.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---

diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index d59f5feb3c54..a45660301b08 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -278,10 +278,13 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 			if (flags & MXC_EHCI_INTERNAL_PHY) {
 				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-					v |= (MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is not used */
-				else
-					v &= ~(MXC_OTG_PHYCTRL_OC_DIS_BIT | MXC_OTG_UCTRL_OPM_BIT); /* OC/USBPWR is used */
+				if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
+					/* OC/USBPWR is not used */
+					v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
+				} else {
+					/* OC/USBPWR is used */
+					v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
+				}
 				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
 
 				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
@@ -289,16 +292,23 @@ int mxc_initialize_usb_hw(int port, unsigned int flags)
 					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
 				else
 					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
+				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
+					v |= MXC_OTG_UCTRL_OPM_BIT;
+				else
+					v &= ~MXC_OTG_UCTRL_OPM_BIT;
 				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
 			}
 			break;
 		case 1:	/* Host 1 */
 			/*Host ULPI */
 			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED)
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
-			else
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);/* HOST1 wakeup/ULPI intr disable */
+			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
+				/* HOST1 wakeup/ULPI intr enable */
+				v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+			} else {
+				/* HOST1 wakeup/ULPI intr disable */
+				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
+			}
 
 			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
 				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/