From: Axel Lin Date: Fri, 14 Feb 2014 12:38:16 +0000 (+0800) Subject: spi: s3c24xx: Convert to let spi core validate bits_per_word X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=08850fa94831d374f4d827a85088f6087836dfc8;p=linux-beck.git spi: s3c24xx: Convert to let spi core validate bits_per_word Set bits_per_word_mask so spi core will reject transfers that attempt to use an unsupported bits_per_word value. Signed-off-by: Axel Lin Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-s3c24xx.c b/drivers/spi/spi-s3c24xx.c index 746424aa5353..f1ffbfa6acef 100644 --- a/drivers/spi/spi-s3c24xx.c +++ b/drivers/spi/spi-s3c24xx.c @@ -123,25 +123,15 @@ static int s3c24xx_spi_update_state(struct spi_device *spi, { struct s3c24xx_spi *hw = to_hw(spi); struct s3c24xx_spi_devstate *cs = spi->controller_state; - unsigned int bpw; unsigned int hz; unsigned int div; unsigned long clk; - bpw = t ? t->bits_per_word : spi->bits_per_word; hz = t ? t->speed_hz : spi->max_speed_hz; - if (!bpw) - bpw = 8; - if (!hz) hz = spi->max_speed_hz; - if (bpw != 8) { - dev_err(&spi->dev, "invalid bits-per-word (%d)\n", bpw); - return -EINVAL; - } - if (spi->mode != cs->mode) { u8 spcon = SPCON_DEFAULT | S3C2410_SPCON_ENSCK; @@ -544,6 +534,7 @@ static int s3c24xx_spi_probe(struct platform_device *pdev) master->num_chipselect = hw->pdata->num_cs; master->bus_num = pdata->bus_num; + master->bits_per_word_mask = SPI_BPW_MASK(8); /* setup the state for the bitbang driver */