From: Maxime Bizon Date: Fri, 19 Oct 2012 08:45:07 +0000 (+0200) Subject: x86: ce4100: allow second UART usage X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=08ec212c0f92cbf30e3ecc7349f18151714041d6;p=linux-beck.git x86: ce4100: allow second UART usage The current CE4100 and 8250_pci code have both a limitation preventing the registration and usage of CE4100's second UART. This patch changes the platform code fixing up the UART port to work on a relative UART port base address, as well as the 8250_pci code to make it register 2 UART ports for CE4100 and pass the port index down to all consumers. Signed-off-by: Florian Fainelli Acked-by: Alan Cox Signed-off-by: Greg Kroah-Hartman --- diff --git a/arch/x86/platform/ce4100/ce4100.c b/arch/x86/platform/ce4100/ce4100.c index 4c61b52191eb..0dcc30e9df8c 100644 --- a/arch/x86/platform/ce4100/ce4100.c +++ b/arch/x86/platform/ce4100/ce4100.c @@ -92,8 +92,11 @@ static void ce4100_serial_fixup(int port, struct uart_port *up, up->membase = (void __iomem *)__fix_to_virt(FIX_EARLYCON_MEM_BASE); up->membase += up->mapbase & ~PAGE_MASK; + up->mapbase += port * 0x100; + up->membase += port * 0x100; up->iotype = UPIO_MEM32; up->regshift = 2; + up->irq = 4; } #endif up->iobase = 0; diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c index 17b7d26abf41..cec8852dd1b6 100644 --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -1068,7 +1068,7 @@ ce4100_serial_setup(struct serial_private *priv, { int ret; - ret = setup_port(priv, port, 0, 0, board->reg_shift); + ret = setup_port(priv, port, idx, 0, board->reg_shift); port->port.iotype = UPIO_MEM32; port->port.type = PORT_XSCALE; port->port.flags = (port->port.flags | UPF_FIXED_PORT | UPF_FIXED_TYPE); @@ -2658,8 +2658,8 @@ static struct pciserial_board pci_boards[] __devinitdata = { .first_offset = 0x1000, }, [pbn_ce4100_1_115200] = { - .flags = FL_BASE0, - .num_ports = 1, + .flags = FL_BASE_BARS, + .num_ports = 2, .base_baud = 921600, .reg_shift = 2, },