From: Sujith Date: Fri, 12 Dec 2008 06:27:43 +0000 (+0530) Subject: mac80211: Fix HT channel selection X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=094d05dc32fc2930e381189a942016e5561775d9;p=linux-beck.git mac80211: Fix HT channel selection HT management is done differently for AP and STA modes, unify to just the ->config() callback since HT is fundamentally a PHY property and cannot be per-BSS. Rename enum nl80211_sec_chan_offset as nl80211_channel_type to denote the channel type ( NO_HT, HT20, HT40+, HT40- ). Signed-off-by: Johannes Berg Signed-off-by: Sujith Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath9k/main.c b/drivers/net/wireless/ath9k/main.c index 02e1771bb274..e22fea18bad6 100644 --- a/drivers/net/wireless/ath9k/main.c +++ b/drivers/net/wireless/ath9k/main.c @@ -623,37 +623,40 @@ static int ath_get_channel(struct ath_softc *sc, return -1; } -/* ext_chan_offset: (-1, 0, 1) (below, none, above) */ - static u32 ath_get_extchanmode(struct ath_softc *sc, struct ieee80211_channel *chan, - int ext_chan_offset, - enum ath9k_ht_macmode tx_chan_width) + enum nl80211_channel_type channel_type) { u32 chanmode = 0; switch (chan->band) { case IEEE80211_BAND_2GHZ: - if ((ext_chan_offset == 0) && - (tx_chan_width == ATH9K_HT_MACMODE_20)) + switch(channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: chanmode = CHANNEL_G_HT20; - if ((ext_chan_offset == 1) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40PLUS: chanmode = CHANNEL_G_HT40PLUS; - if ((ext_chan_offset == -1) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40MINUS: chanmode = CHANNEL_G_HT40MINUS; + break; + } break; case IEEE80211_BAND_5GHZ: - if ((ext_chan_offset == 0) && - (tx_chan_width == ATH9K_HT_MACMODE_20)) + switch(channel_type) { + case NL80211_CHAN_NO_HT: + case NL80211_CHAN_HT20: chanmode = CHANNEL_A_HT20; - if ((ext_chan_offset == 1) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40PLUS: chanmode = CHANNEL_A_HT40PLUS; - if ((ext_chan_offset == -1) && - (tx_chan_width == ATH9K_HT_MACMODE_2040)) + break; + case NL80211_CHAN_HT40MINUS: chanmode = CHANNEL_A_HT40MINUS; + break; + } break; default: break; @@ -829,45 +832,15 @@ static void setup_ht_cap(struct ieee80211_sta_ht_cap *ht_info) ht_info->mcs.tx_params = IEEE80211_HT_MCS_TX_DEFINED; } -static void ath9k_ht_conf(struct ath_softc *sc, - struct ieee80211_bss_conf *bss_conf) -{ - if (sc->hw->conf.ht.enabled) { - if (bss_conf->ht.width_40_ok) - sc->tx_chan_width = ATH9K_HT_MACMODE_2040; - else - sc->tx_chan_width = ATH9K_HT_MACMODE_20; - - ath9k_hw_set11nmac2040(sc->sc_ah, sc->tx_chan_width); - - DPRINTF(sc, ATH_DBG_CONFIG, - "BSS Changed HT, chanwidth: %d\n", sc->tx_chan_width); - } -} - -static inline int ath_sec_offset(u8 ext_offset) -{ - if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_NONE) - return 0; - else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_ABOVE) - return 1; - else if (ext_offset == IEEE80211_HT_PARAM_CHA_SEC_BELOW) - return -1; - - return 0; -} - static void ath9k_bss_assoc_info(struct ath_softc *sc, struct ieee80211_vif *vif, struct ieee80211_bss_conf *bss_conf) { - struct ieee80211_hw *hw = sc->hw; - struct ieee80211_channel *curchan = hw->conf.channel; struct ath_vap *avp = (void *)vif->drv_priv; - int pos; if (bss_conf->assoc) { - DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d\n", bss_conf->aid); + DPRINTF(sc, ATH_DBG_CONFIG, "Bss Info ASSOC %d, bssid: %pM\n", + bss_conf->aid, sc->sc_curbssid); /* New association, store aid */ if (avp->av_opmode == NL80211_IFTYPE_STATION) { @@ -886,40 +859,6 @@ static void ath9k_bss_assoc_info(struct ath_softc *sc, sc->sc_halstats.ns_avgtxrssi = ATH_RSSI_DUMMY_MARKER; sc->sc_halstats.ns_avgtxrate = ATH_RATE_DUMMY_MARKER; - /* Update chainmask */ - ath_update_chainmask(sc, hw->conf.ht.enabled); - - DPRINTF(sc, ATH_DBG_CONFIG, - "bssid %pM aid 0x%x\n", - sc->sc_curbssid, sc->sc_curaid); - - pos = ath_get_channel(sc, curchan); - if (pos == -1) { - DPRINTF(sc, ATH_DBG_FATAL, - "Invalid channel: %d\n", curchan->center_freq); - return; - } - - if (hw->conf.ht.enabled) { - int offset = - ath_sec_offset(bss_conf->ht.secondary_channel_offset); - sc->tx_chan_width = (bss_conf->ht.width_40_ok) ? - ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20; - - sc->sc_ah->ah_channels[pos].chanmode = - ath_get_extchanmode(sc, curchan, - offset, sc->tx_chan_width); - } else { - sc->sc_ah->ah_channels[pos].chanmode = - (curchan->band == IEEE80211_BAND_2GHZ) ? - CHANNEL_G : CHANNEL_A; - } - - /* set h/w channel */ - if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) - DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel: %d\n", - curchan->center_freq); - /* Start ANI */ mod_timer(&sc->sc_ani.timer, jiffies + msecs_to_jiffies(ATH_ANI_POLLINTERVAL)); @@ -2146,7 +2085,8 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) struct ath_softc *sc = hw->priv; struct ieee80211_conf *conf = &hw->conf; - if (changed & IEEE80211_CONF_CHANGE_CHANNEL) { + if (changed & (IEEE80211_CONF_CHANGE_CHANNEL | + IEEE80211_CONF_CHANGE_HT)) { struct ieee80211_channel *curchan = hw->conf.channel; int pos; @@ -2165,25 +2105,23 @@ static int ath9k_config(struct ieee80211_hw *hw, u32 changed) (curchan->band == IEEE80211_BAND_2GHZ) ? CHANNEL_G : CHANNEL_A; - if ((sc->sc_ah->ah_opmode == NL80211_IFTYPE_AP) && - (conf->ht.enabled)) { - sc->tx_chan_width = (!!conf->ht.sec_chan_offset) ? - ATH9K_HT_MACMODE_2040 : ATH9K_HT_MACMODE_20; + if (conf->ht.enabled) { + if (conf->ht.channel_type == NL80211_CHAN_HT40PLUS || + conf->ht.channel_type == NL80211_CHAN_HT40MINUS) + sc->tx_chan_width = ATH9K_HT_MACMODE_2040; sc->sc_ah->ah_channels[pos].chanmode = ath_get_extchanmode(sc, curchan, - conf->ht.sec_chan_offset, - sc->tx_chan_width); + conf->ht.channel_type); } if (ath_set_channel(sc, &sc->sc_ah->ah_channels[pos]) < 0) { DPRINTF(sc, ATH_DBG_FATAL, "Unable to set channel\n"); return -EINVAL; } - } - if (changed & IEEE80211_CONF_CHANGE_HT) ath_update_chainmask(sc, conf->ht.enabled); + } if (changed & IEEE80211_CONF_CHANGE_POWER) sc->sc_config.txpowlimit = 2 * conf->power_level; @@ -2417,9 +2355,6 @@ static void ath9k_bss_info_changed(struct ieee80211_hw *hw, sc->sc_flags &= ~SC_OP_PROTECT_ENABLE; } - if (changed & BSS_CHANGED_HT) - ath9k_ht_conf(sc, bss_conf); - if (changed & BSS_CHANGED_ASSOC) { DPRINTF(sc, ATH_DBG_CONFIG, "BSS Changed ASSOC %d\n", bss_conf->assoc); diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 2f5e86e12916..bbc1c8052ffa 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -515,19 +515,27 @@ static void iwl_ht_conf(struct iwl_priv *priv, iwl_conf->supported_chan_width = !!(ht_conf->cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40); - iwl_conf->extension_chan_offset = bss_conf->ht.secondary_channel_offset; + /* + * XXX: The HT configuration needs to be moved into iwl_mac_config() + * to be done there correctly. + */ + + iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + if (priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40MINUS) + iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW; + else if(priv->hw->conf.ht.channel_type == NL80211_CHAN_HT40PLUS) + iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE; + /* If no above or below channel supplied disable FAT channel */ if (iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_ABOVE && - iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) { - iwl_conf->extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE; + iwl_conf->extension_chan_offset != IEEE80211_HT_PARAM_CHA_SEC_BELOW) iwl_conf->supported_chan_width = 0; - } iwl_conf->sm_ps = (u8)((ht_conf->cap & IEEE80211_HT_CAP_SM_PS) >> 2); memcpy(&iwl_conf->mcs, &ht_conf->mcs, 16); - iwl_conf->tx_chan_width = bss_conf->ht.width_40_ok; + iwl_conf->tx_chan_width = iwl_conf->supported_chan_width != 0; iwl_conf->ht_protection = bss_conf->ht.operation_mode & IEEE80211_HT_OP_MODE_PROTECTION; iwl_conf->non_GF_STA_present = diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c index fd5a537ac51d..f83d69e813d3 100644 --- a/drivers/net/wireless/mac80211_hwsim.c +++ b/drivers/net/wireless/mac80211_hwsim.c @@ -495,11 +495,9 @@ static void mac80211_hwsim_bss_info_changed(struct ieee80211_hw *hw, } if (changed & BSS_CHANGED_HT) { - printk(KERN_DEBUG " %s: HT: sec_ch_offs=%d width_40_ok=%d " - "op_mode=%d\n", + printk(KERN_DEBUG " %s: HT: op_mode=0x%x\n", wiphy_name(hw->wiphy), - info->ht.secondary_channel_offset, - info->ht.width_40_ok, info->ht.operation_mode); + info->ht.operation_mode); } if (changed & BSS_CHANGED_BASIC_RATES) { diff --git a/include/linux/nl80211.h b/include/linux/nl80211.h index 7501acfcfdc4..e86ed59f9ad5 100644 --- a/include/linux/nl80211.h +++ b/include/linux/nl80211.h @@ -201,13 +201,13 @@ enum nl80211_commands { * @NL80211_ATTR_WIPHY_NAME: wiphy name (used for renaming) * @NL80211_ATTR_WIPHY_TXQ_PARAMS: a nested array of TX queue parameters * @NL80211_ATTR_WIPHY_FREQ: frequency of the selected channel in MHz - * @NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET: included with NL80211_ATTR_WIPHY_FREQ + * @NL80211_ATTR_WIPHY_CHANNEL_TYPE: included with NL80211_ATTR_WIPHY_FREQ * if HT20 or HT40 are allowed (i.e., 802.11n disabled if not included): - * NL80211_SEC_CHAN_NO_HT = HT not allowed (i.e., same as not including + * NL80211_CHAN_NO_HT = HT not allowed (i.e., same as not including * this attribute) - * NL80211_SEC_CHAN_DISABLED = HT20 only - * NL80211_SEC_CHAN_BELOW = secondary channel is below the primary channel - * NL80211_SEC_CHAN_ABOVE = secondary channel is above the primary channel + * NL80211_CHAN_HT20 = HT20 only + * NL80211_CHAN_HT40MINUS = secondary channel is below the primary channel + * NL80211_CHAN_HT40PLUS = secondary channel is above the primary channel * * @NL80211_ATTR_IFINDEX: network interface index of the device to operate on * @NL80211_ATTR_IFNAME: network interface name @@ -344,7 +344,7 @@ enum nl80211_attrs { NL80211_ATTR_WIPHY_TXQ_PARAMS, NL80211_ATTR_WIPHY_FREQ, - NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET, + NL80211_ATTR_WIPHY_CHANNEL_TYPE, /* add attributes here, update the policy in nl80211.c */ @@ -805,10 +805,10 @@ enum nl80211_txq_q { NL80211_TXQ_Q_BK }; -enum nl80211_sec_chan_offset { - NL80211_SEC_CHAN_NO_HT /* No HT */, - NL80211_SEC_CHAN_DISABLED /* HT20 only */, - NL80211_SEC_CHAN_BELOW /* HT40- */, - NL80211_SEC_CHAN_ABOVE /* HT40+ */ +enum nl80211_channel_type { + NL80211_CHAN_NO_HT, + NL80211_CHAN_HT20, + NL80211_CHAN_HT40MINUS, + NL80211_CHAN_HT40PLUS }; #endif /* __LINUX_NL80211_H */ diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h index 65e03ac93109..23c0ab74ded6 100644 --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h @@ -563,7 +563,7 @@ struct cfg80211_ops { int (*set_channel)(struct wiphy *wiphy, struct ieee80211_channel *chan, - enum nl80211_sec_chan_offset); + enum nl80211_channel_type channel_type); }; /* temporary wext handlers */ diff --git a/include/net/mac80211.h b/include/net/mac80211.h index 046ce692a906..22ae72c58d76 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -165,14 +165,9 @@ enum ieee80211_bss_change { /** * struct ieee80211_bss_ht_conf - BSS's changing HT configuration - * @secondary_channel_offset: secondary channel offset, uses - * %IEEE80211_HT_PARAM_CHA_SEC_ values - * @width_40_ok: indicates that 40 MHz bandwidth may be used for TX * @operation_mode: HT operation mode (like in &struct ieee80211_ht_info) */ struct ieee80211_bss_ht_conf { - u8 secondary_channel_offset; - bool width_40_ok; u16 operation_mode; }; @@ -508,9 +503,7 @@ static inline int __deprecated __IEEE80211_CONF_SHORT_SLOT_TIME(void) struct ieee80211_ht_conf { bool enabled; - int sec_chan_offset; /* 0 = HT40 disabled; -1 = HT40 enabled, secondary - * channel below primary; 1 = HT40 enabled, - * secondary channel above primary */ + enum nl80211_channel_type channel_type; }; /** diff --git a/net/mac80211/cfg.c b/net/mac80211/cfg.c index 23b5eeaf7bc5..3ea0884c9432 100644 --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c @@ -1122,12 +1122,12 @@ static int ieee80211_set_txq_params(struct wiphy *wiphy, static int ieee80211_set_channel(struct wiphy *wiphy, struct ieee80211_channel *chan, - enum nl80211_sec_chan_offset sec_chan_offset) + enum nl80211_channel_type channel_type) { struct ieee80211_local *local = wiphy_priv(wiphy); local->oper_channel = chan; - local->oper_sec_chan_offset = sec_chan_offset; + local->oper_channel_type = channel_type; return ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_CHANNEL); } diff --git a/net/mac80211/ht.c b/net/mac80211/ht.c index a1eed7032c9b..5f510a13b9f0 100644 --- a/net/mac80211/ht.c +++ b/net/mac80211/ht.c @@ -98,6 +98,7 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, struct ieee80211_bss_ht_conf ht; u32 changed = 0; bool enable_ht = true, ht_changed; + enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; sband = local->hw.wiphy->bands[local->hw.conf.channel->band]; @@ -112,24 +113,36 @@ u32 ieee80211_enable_ht(struct ieee80211_sub_if_data *sdata, ieee80211_channel_to_frequency(hti->control_chan)) enable_ht = false; - /* - * XXX: This is totally incorrect when there are multiple virtual - * interfaces, needs to be fixed later. - */ - ht_changed = local->hw.conf.ht.enabled != enable_ht; + if (enable_ht) { + channel_type = NL80211_CHAN_HT20; + + if (!(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) && + (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) && + (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY)) { + switch(hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET) { + case IEEE80211_HT_PARAM_CHA_SEC_ABOVE: + channel_type = NL80211_CHAN_HT40PLUS; + break; + case IEEE80211_HT_PARAM_CHA_SEC_BELOW: + channel_type = NL80211_CHAN_HT40MINUS; + break; + } + } + } + + ht_changed = local->hw.conf.ht.enabled != enable_ht || + channel_type != local->hw.conf.ht.channel_type; + + local->oper_channel_type = channel_type; local->hw.conf.ht.enabled = enable_ht; + if (ht_changed) ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT); /* disable HT */ if (!enable_ht) return 0; - ht.secondary_channel_offset = - hti->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET; - ht.width_40_ok = - !(ap_ht_cap_flags & IEEE80211_HT_CAP_40MHZ_INTOLERANT) && - (sband->ht_cap.cap & IEEE80211_HT_CAP_SUP_WIDTH_20_40) && - (hti->ht_param & IEEE80211_HT_PARAM_CHAN_WIDTH_ANY); + ht.operation_mode = le16_to_cpu(hti->operation_mode); /* if bss configuration changed store the new one */ diff --git a/net/mac80211/ieee80211_i.h b/net/mac80211/ieee80211_i.h index 6f59e11d7b33..a7dabaecfc72 100644 --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h @@ -625,7 +625,7 @@ struct ieee80211_local { struct delayed_work scan_work; struct ieee80211_sub_if_data *scan_sdata; struct ieee80211_channel *oper_channel, *scan_channel; - enum nl80211_sec_chan_offset oper_sec_chan_offset; + enum nl80211_channel_type oper_channel_type; u8 scan_ssid[IEEE80211_MAX_SSID_LEN]; size_t scan_ssid_len; struct list_head bss_list; diff --git a/net/mac80211/main.c b/net/mac80211/main.c index 6d8710327d14..a0371caf01ce 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -195,37 +195,30 @@ int ieee80211_hw_config(struct ieee80211_local *local, u32 changed) struct ieee80211_channel *chan; int ret = 0; int power; - enum nl80211_sec_chan_offset sec_chan_offset; + enum nl80211_channel_type channel_type; might_sleep(); if (local->sw_scanning) { chan = local->scan_channel; - sec_chan_offset = NL80211_SEC_CHAN_NO_HT; + channel_type = NL80211_CHAN_NO_HT; } else { chan = local->oper_channel; - sec_chan_offset = local->oper_sec_chan_offset; + channel_type = local->oper_channel_type; } if (chan != local->hw.conf.channel || - sec_chan_offset != local->hw.conf.ht.sec_chan_offset) { + channel_type != local->hw.conf.ht.channel_type) { local->hw.conf.channel = chan; - switch (sec_chan_offset) { - case NL80211_SEC_CHAN_NO_HT: + local->hw.conf.ht.channel_type = channel_type; + switch (channel_type) { + case NL80211_CHAN_NO_HT: local->hw.conf.ht.enabled = false; - local->hw.conf.ht.sec_chan_offset = 0; break; - case NL80211_SEC_CHAN_DISABLED: + case NL80211_CHAN_HT20: + case NL80211_CHAN_HT40MINUS: + case NL80211_CHAN_HT40PLUS: local->hw.conf.ht.enabled = true; - local->hw.conf.ht.sec_chan_offset = 0; - break; - case NL80211_SEC_CHAN_BELOW: - local->hw.conf.ht.enabled = true; - local->hw.conf.ht.sec_chan_offset = -1; - break; - case NL80211_SEC_CHAN_ABOVE: - local->hw.conf.ht.enabled = true; - local->hw.conf.ht.sec_chan_offset = 1; break; } changed |= IEEE80211_CONF_CHANGE_CHANNEL; diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 290b0017ef2e..e4d1fca5c72d 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -858,6 +858,7 @@ static void ieee80211_set_disassoc(struct ieee80211_sub_if_data *sdata, rcu_read_unlock(); local->hw.conf.ht.enabled = false; + local->oper_channel_type = NL80211_CHAN_NO_HT; ieee80211_hw_config(local, IEEE80211_CONF_CHANGE_HT); ieee80211_bss_info_change_notify(sdata, changed); diff --git a/net/mac80211/util.c b/net/mac80211/util.c index 505d68f344ce..71a8391c54f6 100644 --- a/net/mac80211/util.c +++ b/net/mac80211/util.c @@ -641,7 +641,7 @@ int ieee80211_set_freq(struct ieee80211_sub_if_data *sdata, int freqMHz) chan->flags & IEEE80211_CHAN_NO_IBSS) return ret; local->oper_channel = chan; - local->oper_sec_chan_offset = NL80211_SEC_CHAN_NO_HT; + local->oper_channel_type = NL80211_CHAN_NO_HT; if (local->sw_scanning || local->hw_scanning) ret = 0; diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c index 93c9b983ce08..1e728fff474e 100644 --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c @@ -60,7 +60,7 @@ static struct nla_policy nl80211_policy[NL80211_ATTR_MAX+1] __read_mostly = { .len = BUS_ID_SIZE-1 }, [NL80211_ATTR_WIPHY_TXQ_PARAMS] = { .type = NLA_NESTED }, [NL80211_ATTR_WIPHY_FREQ] = { .type = NLA_U32 }, - [NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET] = { .type = NLA_U32 }, + [NL80211_ATTR_WIPHY_CHANNEL_TYPE] = { .type = NLA_U32 }, [NL80211_ATTR_IFTYPE] = { .type = NLA_U32 }, [NL80211_ATTR_IFINDEX] = { .type = NLA_U32 }, @@ -362,8 +362,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) } if (info->attrs[NL80211_ATTR_WIPHY_FREQ]) { - enum nl80211_sec_chan_offset sec_chan_offset = - NL80211_SEC_CHAN_NO_HT; + enum nl80211_channel_type channel_type = NL80211_CHAN_NO_HT; struct ieee80211_channel *chan; struct ieee80211_sta_ht_cap *ht_cap; u32 freq, sec_freq; @@ -375,13 +374,13 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) result = -EINVAL; - if (info->attrs[NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]) { - sec_chan_offset = nla_get_u32(info->attrs[ - NL80211_ATTR_WIPHY_SEC_CHAN_OFFSET]); - if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT && - sec_chan_offset != NL80211_SEC_CHAN_DISABLED && - sec_chan_offset != NL80211_SEC_CHAN_BELOW && - sec_chan_offset != NL80211_SEC_CHAN_ABOVE) + if (info->attrs[NL80211_ATTR_WIPHY_CHANNEL_TYPE]) { + channel_type = nla_get_u32(info->attrs[ + NL80211_ATTR_WIPHY_CHANNEL_TYPE]); + if (channel_type != NL80211_CHAN_NO_HT && + channel_type != NL80211_CHAN_HT20 && + channel_type != NL80211_CHAN_HT40PLUS && + channel_type != NL80211_CHAN_HT40MINUS) goto bad_res; } @@ -392,9 +391,9 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) if (!chan || chan->flags & IEEE80211_CHAN_DISABLED) goto bad_res; - if (sec_chan_offset == NL80211_SEC_CHAN_BELOW) + if (channel_type == NL80211_CHAN_HT40MINUS) sec_freq = freq - 20; - else if (sec_chan_offset == NL80211_SEC_CHAN_ABOVE) + else if (channel_type == NL80211_CHAN_HT40PLUS) sec_freq = freq + 20; else sec_freq = 0; @@ -402,7 +401,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) ht_cap = &rdev->wiphy.bands[chan->band]->ht_cap; /* no HT capabilities */ - if (sec_chan_offset != NL80211_SEC_CHAN_NO_HT && + if (channel_type != NL80211_CHAN_NO_HT && !ht_cap->ht_supported) goto bad_res; @@ -422,7 +421,7 @@ static int nl80211_set_wiphy(struct sk_buff *skb, struct genl_info *info) } result = rdev->ops->set_channel(&rdev->wiphy, chan, - sec_chan_offset); + channel_type); if (result) goto bad_res; }