From: Krzysztof Adamski Date: Mon, 22 Feb 2016 13:03:26 +0000 (+0100) Subject: dts: sun8i-h3: Add APB0 related clocks and resets X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=097872945ea6b70707772eea520c4e273a9c7321;p=linux-beck.git dts: sun8i-h3: Add APB0 related clocks and resets APB0 is bearly mentioned in H3 User Manual and it is only setup in the Allwinners kernel dump for CIR. I have verified experimentally that the gate for R_PIO exists and works, though. There are probably other gates there but I don't know their order right now and I don't have access to their peripherals on my board to test them. After some experiments and reviewing how this is organized on other sunxi SoCs, I couldn't actually find any way to disable clocks for R_PIO and they are working properly without doing anything so I assume they are connected straight to the 24Mhz oscillator for now. Signed-off-by: Krzysztof Adamski Signed-off-by: Maxime Ripard --- diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi index 3ba65c2b53e5..1348b69c36c2 100644 --- a/arch/arm/boot/dts/sun8i-h3.dtsi +++ b/arch/arm/boot/dts/sun8i-h3.dtsi @@ -276,6 +276,25 @@ clocks = <&osc24M>, <&pll6 1>, <&pll5>; clock-output-names = "mbus"; }; + + apb0: apb0_clk { + compatible = "fixed-factor-clock"; + #clock-cells = <0>; + clock-div = <1>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "apb0"; + }; + + apb0_gates: clk@01f01428 { + compatible = "allwinner,sun8i-h3-apb0-gates-clk", + "allwinner,sun4i-a10-gates-clk"; + reg = <0x01f01428 0x4>; + #clock-cells = <1>; + clocks = <&apb0>; + clock-indices = <0>, <1>; + clock-output-names = "apb0_pio", "apb0_ir"; + }; }; soc { @@ -493,5 +512,11 @@ interrupts = , ; }; + + apb0_reset: reset@01f014b0 { + reg = <0x01f014b0 0x4>; + compatible = "allwinner,sun6i-a31-clock-reset"; + #reset-cells = <1>; + }; }; };