From: Mikael Pettersson <mikpe@it.uu.se>
Date: Sun, 25 Feb 2007 16:51:15 +0000 (+0100)
Subject: sata_promise: simplify port setup
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=098cdff3d40286f87062c17cd07e98ca7ad94184;p=linux-beck.git

sata_promise: simplify port setup

Each place in pdc_ata_init_one() that initialises a SATA
port first calls pdc_ata_setup_port(), and then manually
assigns the port's ->scr_addr. Simplify the code by extending
pdc_ata_setup_port() to also handle scr_addr initialisation;
for PATA ports we pass NULL as scr_addr.

The initialisation of the PATA-only 20619 redundantly set
up scr_addr for the ports. Remove this.

Tested on 20619, 20575, and 20775 chips.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
---

diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c
index 5940bf403751..44e0fc7471f2 100644
--- a/drivers/ata/sata_promise.c
+++ b/drivers/ata/sata_promise.c
@@ -777,7 +777,8 @@ static int pdc_old_check_atapi_dma(struct ata_queued_cmd *qc)
 	return pdc_check_atapi_dma(qc);
 }
 
-static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
+static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base,
+			       void __iomem *scr_addr)
 {
 	port->cmd_addr		= base;
 	port->data_addr		= base;
@@ -792,6 +793,7 @@ static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
 	port->status_addr	= base + 0x1c;
 	port->altstatus_addr	=
 	port->ctl_addr		= base + 0x38;
+	port->scr_addr		= scr_addr;
 }
 
 
@@ -904,11 +906,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 
 	base = probe_ent->iomap[PDC_MMIO_BAR];
 
-	pdc_ata_setup_port(&probe_ent->port[0], base + 0x200);
-	pdc_ata_setup_port(&probe_ent->port[1], base + 0x280);
-
-	probe_ent->port[0].scr_addr = base + 0x400;
-	probe_ent->port[1].scr_addr = base + 0x500;
+	pdc_ata_setup_port(&probe_ent->port[0], base + 0x200, base + 0x400);
+	pdc_ata_setup_port(&probe_ent->port[1], base + 0x280, base + 0x500);
 
 	/* notice 4-port boards */
 	switch (board_idx) {
@@ -917,12 +916,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		/* Fall through */
 	case board_20319:
        		probe_ent->n_ports = 4;
-
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
-		probe_ent->port[2].scr_addr = base + 0x600;
-		probe_ent->port[3].scr_addr = base + 0x700;
+		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, base + 0x600);
+		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, base + 0x700);
 		break;
 	case board_2057x:
 		hp->flags |= PDC_FLAG_GEN_II;
@@ -932,7 +927,7 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		tmp = readb(base + PDC_FLASH_CTL+1);
 		if (!(tmp & 0x80)) {
 			probe_ent->n_ports = 3;
-			pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
+			pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
 			hp->port_flags[2] = ATA_FLAG_SLAVE_POSS;
 			printk(KERN_INFO DRV_NAME " PATA port found\n");
 		} else
@@ -942,12 +937,8 @@ static int pdc_ata_init_one (struct pci_dev *pdev, const struct pci_device_id *e
 		break;
 	case board_20619:
 		probe_ent->n_ports = 4;
-
-		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300);
-		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380);
-
-		probe_ent->port[2].scr_addr = base + 0x600;
-		probe_ent->port[3].scr_addr = base + 0x700;
+		pdc_ata_setup_port(&probe_ent->port[2], base + 0x300, NULL);
+		pdc_ata_setup_port(&probe_ent->port[3], base + 0x380, NULL);
 		break;
 	default:
 		BUG();