From: James Bottomley Date: Fri, 22 Apr 2005 02:50:33 +0000 (-0400) Subject: [SCSI] remove PCI2000 and PCI2220i drivers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=099175c94a221fa2723b7273883c98cd32efe900;p=linux-beck.git [SCSI] remove PCI2000 and PCI2220i drivers From: Christoph Hellwig Both drivers are marked broken and haven't compiled since very early 2.5.x. And they're for IDE hardware so they shouldn't have been written to the SCSI layer at all. Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 750b11cefd93..2ef5aee86b29 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -1192,28 +1192,6 @@ config SCSI_PAS16 To compile this driver as a module, choose M here: the module will be called pas16. -config SCSI_PCI2000 - tristate "PCI2000 support" - depends on PCI && SCSI && BROKEN - help - This is support for the PCI2000I EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called pci2000. - -config SCSI_PCI2220I - tristate "PCI2220i support" - depends on PCI && SCSI && BROKEN - help - This is support for the PCI2220i EIDE interface card which acts as a - SCSI host adapter. Please read the SCSI-HOWTO, available from - . - - To compile this driver as a module, choose M here: the - module will be called pci2220i. - config SCSI_PSI240I tristate "PSI240i support" depends on ISA && SCSI diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile index 9cb9fe7d623a..51d9c1e1884b 100644 --- a/drivers/scsi/Makefile +++ b/drivers/scsi/Makefile @@ -50,8 +50,6 @@ obj-$(CONFIG_MVME16x_SCSI) += mvme16x.o 53c7xx.o obj-$(CONFIG_BVME6000_SCSI) += bvme6000.o 53c7xx.o obj-$(CONFIG_SCSI_SIM710) += 53c700.o sim710.o obj-$(CONFIG_SCSI_ADVANSYS) += advansys.o -obj-$(CONFIG_SCSI_PCI2000) += pci2000.o -obj-$(CONFIG_SCSI_PCI2220I) += pci2220i.o obj-$(CONFIG_SCSI_PSI240I) += psi240i.o obj-$(CONFIG_SCSI_BUSLOGIC) += BusLogic.o obj-$(CONFIG_SCSI_DPT_I2O) += dpt_i2o.o diff --git a/drivers/scsi/pci2000.c b/drivers/scsi/pci2000.c deleted file mode 100644 index 377a4666b568..000000000000 --- a/drivers/scsi/pci2000.c +++ /dev/null @@ -1,836 +0,0 @@ -/**************************************************************************** - * Perceptive Solutions, Inc. PCI-2000 device driver for Linux. - * - * pci2000.c - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters - * - * Copyright (c) 1997-1999 Perceptive Solutions, Inc. - * All Rights Reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that redistributions of source - * code retain the above copyright notice and this comment without - * modification. - * - * Technical updates and product information at: - * http://www.psidisk.com - * - * Please send questions, comments, bug reports to: - * tech@psidisk.com Technical Support - * - * - * Revisions 1.10 Jan-21-1999 - * - Fixed sign on message to reflect proper controller name. - * - Added support for RAID status monitoring and control. - * - * Revisions 1.11 Mar-22-1999 - * - Fixed control timeout to not lock up the entire system if - * controller goes offline completely. - * - * Revisions 1.12 Mar-26-1999 - * - Fixed spinlock and PCI configuration. - * - * Revisions 1.20 Mar-27-2000 - * - Added support for dynamic DMA - * - ****************************************************************************/ -#define PCI2000_VERSION "1.20" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "scsi.h" -#include -#include "pci2000.h" -#include "psi_roy.h" - - -//#define DEBUG 1 - -#ifdef DEBUG -#define DEB(x) x -#define STOP_HERE {int st;for(st=0;st<100;st++){st=1;}} -#else -#define DEB(x) -#define STOP_HERE -#endif - -typedef struct - { - unsigned int address; - unsigned int length; - } SCATGATH, *PSCATGATH; - -typedef struct - { - Scsi_Cmnd *SCpnt; - PSCATGATH scatGath; - dma_addr_t scatGathDma; - UCHAR *cdb; - dma_addr_t cdbDma; - UCHAR tag; - } DEV2000, *PDEV2000; - -typedef struct - { - ULONG basePort; - ULONG mb0; - ULONG mb1; - ULONG mb2; - ULONG mb3; - ULONG mb4; - ULONG cmd; - ULONG tag; - ULONG irqOwned; - struct pci_dev *pdev; - DEV2000 dev[MAX_BUS][MAX_UNITS]; - } ADAPTER2000, *PADAPTER2000; - -#define HOSTDATA(host) ((PADAPTER2000)&host->hostdata) -#define consistentLen (MAX_BUS * MAX_UNITS * (16 * sizeof (SCATGATH) + MAX_COMMAND_SIZE)) - - -static struct Scsi_Host *PsiHost[MAXADAPTER] = {NULL,}; // One for each adapter -static int NumAdapters = 0; -/**************************************************************** - * Name: WaitReady :LOCAL - * - * Description: Wait for controller ready. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE on not ready. - * - ****************************************************************/ -static int WaitReady (PADAPTER2000 padapter) - { - ULONG z; - - for ( z = 0; z < (TIMEOUT_COMMAND * 4); z++ ) - { - if ( !inb_p (padapter->cmd) ) - return FALSE; - udelay (250); - }; - return TRUE; - } -/**************************************************************** - * Name: WaitReadyLong :LOCAL - * - * Description: Wait for controller ready. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE on not ready. - * - ****************************************************************/ -static int WaitReadyLong (PADAPTER2000 padapter) - { - ULONG z; - - for ( z = 0; z < (5000 * 4); z++ ) - { - if ( !inb_p (padapter->cmd) ) - return FALSE; - udelay (250); - }; - return TRUE; - } -/**************************************************************** - * Name: OpDone :LOCAL - * - * Description: Clean up operation and issue done to caller. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * status - Caller status. - * - * Returns: Nothing. - * - ****************************************************************/ -static void OpDone (Scsi_Cmnd *SCpnt, ULONG status) - { - SCpnt->result = status; - SCpnt->scsi_done (SCpnt); - } -/**************************************************************** - * Name: Command :LOCAL - * - * Description: Issue queued command to the PCI-2000. - * - * Parameters: padapter - Pointer to adapter information structure. - * cmd - PCI-2000 command byte. - * - * Returns: Non-zero command tag if operation is accepted. - * - ****************************************************************/ -static UCHAR Command (PADAPTER2000 padapter, UCHAR cmd) - { - outb_p (cmd, padapter->cmd); - if ( WaitReady (padapter) ) - return 0; - - if ( inw_p (padapter->mb0) ) - return 0; - - return inb_p (padapter->mb1); - } -/**************************************************************** - * Name: BuildSgList :LOCAL - * - * Description: Build the scatter gather list for controller. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * padapter - Pointer to adapter information structure. - * pdev - Pointer to adapter device structure. - * - * Returns: Non-zero in not scatter gather. - * - ****************************************************************/ -static int BuildSgList (Scsi_Cmnd *SCpnt, PADAPTER2000 padapter, PDEV2000 pdev) - { - int z; - int zc; - struct scatterlist *sg; - - if ( SCpnt->use_sg ) - { - sg = (struct scatterlist *)SCpnt->request_buffer; - zc = pci_map_sg (padapter->pdev, sg, SCpnt->use_sg, SCpnt->sc_data_direction); - for ( z = 0; z < zc; z++ ) - { - pdev->scatGath[z].address = cpu_to_le32 (sg_dma_address (sg)); - pdev->scatGath[z].length = cpu_to_le32 (sg_dma_len (sg++)); - } - outl (pdev->scatGathDma, padapter->mb2); - outl ((zc << 24) | SCpnt->request_bufflen, padapter->mb3); - return FALSE; - } - if ( !SCpnt->request_bufflen) - { - outl (0, padapter->mb2); - outl (0, padapter->mb3); - return TRUE; - } - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, - SCpnt->request_buffer, SCpnt->request_bufflen, - SCpnt->sc_data_direction); - outl (SCpnt->SCp.have_data_in, padapter->mb2); - outl (SCpnt->request_bufflen, padapter->mb3); - return TRUE; - } -/********************************************************************* - * Name: PsiRaidCmd - * - * Description: Execute a simple command. - * - * Parameters: padapter - Pointer to adapter control structure. - * cmd - Roy command byte. - * - * Returns: Return error status. - * - ********************************************************************/ -static int PsiRaidCmd (PADAPTER2000 padapter, char cmd) - { - if ( WaitReady (padapter) ) // test for command register ready - return DID_TIME_OUT; - outb_p (cmd, padapter->cmd); // issue command - if ( WaitReadyLong (padapter) ) // wait for adapter ready - return DID_TIME_OUT; - return DID_OK; - } -/**************************************************************** - * Name: Irq_Handler :LOCAL - * - * Description: Interrupt handler. - * - * Parameters: irq - Hardware IRQ number. - * dev_id - - * regs - - * - * Returns: TRUE if drive is not ready in time. - * - ****************************************************************/ -static irqreturn_t Irq_Handler (int irq, void *dev_id, struct pt_regs *regs) - { - struct Scsi_Host *shost = NULL; // Pointer to host data block - PADAPTER2000 padapter; // Pointer to adapter control structure - PDEV2000 pdev; - Scsi_Cmnd *SCpnt; - UCHAR tag = 0; - UCHAR tag0; - ULONG error; - int pun; - int bus; - int z; - unsigned long flags; - int handled = 0; - - DEB(printk ("\npci2000 received interrupt ")); - for ( z = 0; z < NumAdapters; z++ ) // scan for interrupt to process - { - if ( PsiHost[z]->irq == (UCHAR)(irq & 0xFF) ) - { - tag = inb_p (HOSTDATA(PsiHost[z])->tag); - if ( tag ) - { - shost = PsiHost[z]; - break; - } - } - } - - if ( !shost ) - { - DEB (printk ("\npci2000: not my interrupt")); - goto out; - } - - handled = 1; - spin_lock_irqsave(shost->host_lock, flags); - padapter = HOSTDATA(shost); - - tag0 = tag & 0x7F; // mask off the error bit - for ( bus = 0; bus < MAX_BUS; bus++ ) // scan the busses - { - for ( pun = 0; pun < MAX_UNITS; pun++ ) // scan the targets - { - pdev = &padapter->dev[bus][pun]; - if ( !pdev->tag ) - continue; - if ( pdev->tag == tag0 ) // is this it? - { - pdev->tag = 0; - SCpnt = pdev->SCpnt; - goto unmapProceed; - } - } - } - - outb_p (0xFF, padapter->tag); // clear the op interrupt - outb_p (CMD_DONE, padapter->cmd); // complete the op - goto irq_return; // done, but, with what? - -unmapProceed:; - if ( !bus ) - { - switch ( SCpnt->cmnd[0] ) - { - case SCSIOP_TEST_UNIT_READY: - pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, sizeof (SCpnt->sense_buffer), PCI_DMA_FROMDEVICE); - goto irqProceed; - case SCSIOP_READ_CAPACITY: - pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, 8, PCI_DMA_FROMDEVICE); - goto irqProceed; - case SCSIOP_VERIFY: - case SCSIOP_START_STOP_UNIT: - case SCSIOP_MEDIUM_REMOVAL: - goto irqProceed; - } - } - if ( SCpnt->SCp.have_data_in ) - pci_unmap_single (padapter->pdev, SCpnt->SCp.have_data_in, SCpnt->request_bufflen, SCpnt->sc_data_direction); - else - { - if ( SCpnt->use_sg ) - pci_unmap_sg (padapter->pdev, (struct scatterlist *)SCpnt->request_buffer, SCpnt->use_sg, SCpnt->sc_data_direction); - } - -irqProceed:; - if ( tag & ERR08_TAGGED ) // is there an error here? - { - if ( WaitReady (padapter) ) - { - OpDone (SCpnt, DID_TIME_OUT << 16); - goto irq_return; - } - - outb_p (tag0, padapter->mb0); // get real error code - outb_p (CMD_ERROR, padapter->cmd); - if ( WaitReady (padapter) ) // wait for controller to suck up the op - { - OpDone (SCpnt, DID_TIME_OUT << 16); - goto irq_return; - } - - error = inl (padapter->mb0); // get error data - outb_p (0xFF, padapter->tag); // clear the op interrupt - outb_p (CMD_DONE, padapter->cmd); // complete the op - - DEB (printk ("status: %lX ", error)); - if ( error == 0x00020002 ) // is this error a check condition? - { - if ( bus ) // are we doint SCSI commands? - { - OpDone (SCpnt, (DID_OK << 16) | 2); - goto irq_return; - } - if ( *SCpnt->cmnd == SCSIOP_TEST_UNIT_READY ) - OpDone (SCpnt, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2); // test caller we have sense data too - else - OpDone (SCpnt, DID_ERROR << 16); - goto irq_return; - } - OpDone (SCpnt, DID_ERROR << 16); - goto irq_return; - } - - outb_p (0xFF, padapter->tag); // clear the op interrupt - outb_p (CMD_DONE, padapter->cmd); // complete the op - OpDone (SCpnt, DID_OK << 16); - -irq_return: - spin_unlock_irqrestore(shost->host_lock, flags); -out: - return IRQ_RETVAL(handled); -} -/**************************************************************** - * Name: Pci2000_QueueCommand - * - * Description: Process a queued command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * done - Pointer to done function to call. - * - * Returns: Status code. - * - ****************************************************************/ -int Pci2000_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) - { - UCHAR *cdb = (UCHAR *)SCpnt->cmnd; // Pointer to SCSI CDB - PADAPTER2000 padapter = HOSTDATA(SCpnt->device->host); // Pointer to adapter control structure - int rc = -1; // command return code - UCHAR bus = SCpnt->device->channel; - UCHAR pun = SCpnt->device->id; - UCHAR lun = SCpnt->device->lun; - UCHAR cmd; - PDEV2000 pdev = &padapter->dev[bus][pun]; - - if ( !done ) - { - printk("pci2000_queuecommand: %02X: done can't be NULL\n", *cdb); - return 0; - } - - SCpnt->scsi_done = done; - SCpnt->SCp.have_data_in = 0; - pdev->SCpnt = SCpnt; // Save this command data - - if ( WaitReady (padapter) ) - { - rc = DID_ERROR; - goto finished; - } - - outw_p (pun | (lun << 8), padapter->mb0); - - if ( bus ) - { - DEB (if(*cdb) printk ("\nCDB: %X- %X %X %X %X %X %X %X %X %X %X ", SCpnt->cmd_len, cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9])); - DEB (if(*cdb) printk ("\ntimeout_per_command: %d, timeout_total: %d, timeout: %d", SCpnt->timeout_per_command, - SCpnt->timeout_total, SCpnt->timeout)); - outl (SCpnt->timeout_per_command, padapter->mb1); - outb_p (CMD_SCSI_TIMEOUT, padapter->cmd); - if ( WaitReady (padapter) ) - { - rc = DID_ERROR; - goto finished; - } - - outw_p (pun | (lun << 8), padapter->mb0); - outw_p (SCpnt->cmd_len << 8, padapter->mb0 + 2); - memcpy (pdev->cdb, cdb, MAX_COMMAND_SIZE); - - outl (pdev->cdbDma, padapter->mb1); - if ( BuildSgList (SCpnt, padapter, pdev) ) - cmd = CMD_SCSI_THRU; - else - cmd = CMD_SCSI_THRU_SG; - if ( (pdev->tag = Command (padapter, cmd)) == 0 ) - rc = DID_TIME_OUT; - goto finished; - } - else - { - if ( lun ) - { - rc = DID_BAD_TARGET; - goto finished; - } - } - - switch ( *cdb ) - { - case SCSIOP_INQUIRY: // inquiry CDB - if ( cdb[2] == SC_MY_RAID ) - { - switch ( cdb[3] ) - { - case MY_SCSI_REBUILD: - OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_REBUILD) << 16); - return 0; - case MY_SCSI_ALARMMUTE: - OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_MUTE) << 16); - return 0; - case MY_SCSI_DEMOFAIL: - OpDone (SCpnt, PsiRaidCmd (padapter, CMD_RAID_FAIL) << 16); - return 0; - default: - if ( SCpnt->use_sg ) - { - rc = DID_ERROR; - goto finished; - } - else - { - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, SCpnt->request_bufflen, - SCpnt->sc_data_direction); - outl (SCpnt->SCp.have_data_in, padapter->mb2); - } - outl (cdb[5], padapter->mb0); - outl (cdb[3], padapter->mb3); - cmd = CMD_DASD_RAID_RQ; - break; - } - break; - } - - if ( SCpnt->use_sg ) - { - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, - ((struct scatterlist *)SCpnt->request_buffer)->address, - SCpnt->request_bufflen, - SCpnt->sc_data_direction); - } - else - { - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, - SCpnt->request_bufflen, - SCpnt->sc_data_direction); - } - outl (SCpnt->SCp.have_data_in, padapter->mb2); - outl (SCpnt->request_bufflen, padapter->mb3); - cmd = CMD_DASD_SCSI_INQ; - break; - - case SCSIOP_TEST_UNIT_READY: // test unit ready CDB - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->sense_buffer, sizeof (SCpnt->sense_buffer), PCI_DMA_FROMDEVICE); - outl (SCpnt->SCp.have_data_in, padapter->mb2); - outl (sizeof (SCpnt->sense_buffer), padapter->mb3); - cmd = CMD_TEST_READY; - break; - - case SCSIOP_READ_CAPACITY: // read capacity CDB - if ( SCpnt->use_sg ) - { - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, ((struct scatterlist *)(SCpnt->request_buffer))->address, - 8, PCI_DMA_FROMDEVICE); - } - else - SCpnt->SCp.have_data_in = pci_map_single (padapter->pdev, SCpnt->request_buffer, 8, PCI_DMA_FROMDEVICE); - outl (SCpnt->SCp.have_data_in, padapter->mb2); - outl (8, padapter->mb3); - cmd = CMD_DASD_CAP; - break; - case SCSIOP_VERIFY: // verify CDB - outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2); - outl (XSCSI2LONG (&cdb[2]), padapter->mb1); - cmd = CMD_READ_SG; - break; - case SCSIOP_READ: // read10 CDB - outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2); - outl (XSCSI2LONG (&cdb[2]), padapter->mb1); - if ( BuildSgList (SCpnt, padapter, pdev) ) - cmd = CMD_READ; - else - cmd = CMD_READ_SG; - break; - case SCSIOP_READ6: // read6 CDB - outw_p (cdb[4], padapter->mb0 + 2); - outl ((SCSI2LONG (&cdb[1])) & 0x001FFFFF, padapter->mb1); - if ( BuildSgList (SCpnt, padapter, pdev) ) - cmd = CMD_READ; - else - cmd = CMD_READ_SG; - break; - case SCSIOP_WRITE: // write10 CDB - outw_p ((USHORT)cdb[8] | ((USHORT)cdb[7] << 8), padapter->mb0 + 2); - outl (XSCSI2LONG (&cdb[2]), padapter->mb1); - if ( BuildSgList (SCpnt, padapter, pdev) ) - cmd = CMD_WRITE; - else - cmd = CMD_WRITE_SG; - break; - case SCSIOP_WRITE6: // write6 CDB - outw_p (cdb[4], padapter->mb0 + 2); - outl ((SCSI2LONG (&cdb[1])) & 0x001FFFFF, padapter->mb1); - if ( BuildSgList (SCpnt, padapter, pdev) ) - cmd = CMD_WRITE; - else - cmd = CMD_WRITE_SG; - break; - case SCSIOP_START_STOP_UNIT: - cmd = CMD_EJECT_MEDIA; - break; - case SCSIOP_MEDIUM_REMOVAL: - switch ( cdb[4] ) - { - case 0: - cmd = CMD_UNLOCK_DOOR; - break; - case 1: - cmd = CMD_LOCK_DOOR; - break; - default: - cmd = 0; - break; - } - if ( cmd ) - break; - default: - DEB (printk ("pci2000_queuecommand: Unsupported command %02X\n", *cdb)); - OpDone (SCpnt, DID_ERROR << 16); - return 0; - } - - if ( (pdev->tag = Command (padapter, cmd)) == 0 ) - rc = DID_TIME_OUT; -finished:; - if ( rc != -1 ) - OpDone (SCpnt, rc << 16); - return 0; - } -/**************************************************************** - * Name: Pci2000_Detect - * - * Description: Detect and initialize our boards. - * - * Parameters: tpnt - Pointer to SCSI host template structure. - * - * Returns: Number of adapters installed. - * - ****************************************************************/ -int Pci2000_Detect (Scsi_Host_Template *tpnt) - { - int found = 0; - int installed = 0; - struct Scsi_Host *pshost; - PADAPTER2000 padapter; - int z, zz; - int setirq; - struct pci_dev *pdev = NULL; - UCHAR *consistent; - dma_addr_t consistentDma; - - while ( (pdev = pci_find_device (VENDOR_PSI, DEVICE_ROY_1, pdev)) != NULL ) - { - if (pci_enable_device(pdev)) - continue; - pshost = scsi_register (tpnt, sizeof(ADAPTER2000)); - if(pshost == NULL) - continue; - padapter = HOSTDATA(pshost); - - padapter->basePort = pci_resource_start (pdev, 1); - DEB (printk ("\nBase Regs = %#04X", padapter->basePort)); // get the base I/O port address - padapter->mb0 = padapter->basePort + RTR_MAILBOX; // get the 32 bit mail boxes - padapter->mb1 = padapter->basePort + RTR_MAILBOX + 4; - padapter->mb2 = padapter->basePort + RTR_MAILBOX + 8; - padapter->mb3 = padapter->basePort + RTR_MAILBOX + 12; - padapter->mb4 = padapter->basePort + RTR_MAILBOX + 16; - padapter->cmd = padapter->basePort + RTR_LOCAL_DOORBELL; // command register - padapter->tag = padapter->basePort + RTR_PCI_DOORBELL; // tag/response register - padapter->pdev = pdev; - - if ( WaitReady (padapter) ) - goto unregister; - outb_p (0x84, padapter->mb0); - outb_p (CMD_SPECIFY, padapter->cmd); - if ( WaitReady (padapter) ) - goto unregister; - - consistent = pci_alloc_consistent (pdev, consistentLen, &consistentDma); - if ( !consistent ) - { - printk ("Unable to allocate DMA memory for PCI-2000 controller.\n"); - goto unregister; - } - - scsi_set_device(pshost, &pdev->dev); - pshost->irq = pdev->irq; - setirq = 1; - padapter->irqOwned = 0; - for ( z = 0; z < installed; z++ ) // scan for shared interrupts - { - if ( PsiHost[z]->irq == pshost->irq ) // if shared then, don't posses - setirq = 0; - } - if ( setirq ) // if not shared, posses - { - if ( request_irq (pshost->irq, Irq_Handler, SA_SHIRQ, "pci2000", padapter) < 0 ) - { - if ( request_irq (pshost->irq, Irq_Handler, SA_INTERRUPT | SA_SHIRQ, "pci2000", padapter) < 0 ) - { - printk ("Unable to allocate IRQ for PCI-2000 controller.\n"); - pci_free_consistent (pdev, consistentLen, consistent, consistentDma); - goto unregister; - } - } - padapter->irqOwned = pshost->irq; // set IRQ as owned - } - PsiHost[installed] = pshost; // save SCSI_HOST pointer - - pshost->io_port = padapter->basePort; - pshost->n_io_port = 0xFF; - pshost->unique_id = padapter->basePort; - pshost->max_id = 16; - pshost->max_channel = 1; - - for ( zz = 0; zz < MAX_BUS; zz++ ) - for ( z = 0; z < MAX_UNITS; z++ ) - { - padapter->dev[zz][z].tag = 0; - padapter->dev[zz][z].scatGath = (PSCATGATH)consistent; - padapter->dev[zz][z].scatGathDma = consistentDma; - consistent += 16 * sizeof (SCATGATH); - consistentDma += 16 * sizeof (SCATGATH); - padapter->dev[zz][z].cdb = (UCHAR *)consistent; - padapter->dev[zz][z].cdbDma = consistentDma; - consistent += MAX_COMMAND_SIZE; - consistentDma += MAX_COMMAND_SIZE; - } - - printk("\nPSI-2000 Intelligent Storage SCSI CONTROLLER: at I/O = %lX IRQ = %d\n", padapter->basePort, pshost->irq); - printk("Version %s, Compiled %s %s\n\n", PCI2000_VERSION, __DATE__, __TIME__); - found++; - if ( ++installed < MAXADAPTER ) - continue; - break; -unregister:; - scsi_unregister (pshost); - found++; - } - NumAdapters = installed; - return installed; - } -/**************************************************************** - * Name: Pci2000_Abort - * - * Description: Process the Abort command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * - * Returns: Allways snooze. - * - ****************************************************************/ -int Pci2000_Abort (Scsi_Cmnd *SCpnt) - { - DEB (printk ("pci2000_abort\n")); - return SCSI_ABORT_SNOOZE; - } -/**************************************************************** - * Name: Pci2000_Reset - * - * Description: Process the Reset command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * flags - Flags about the reset command - * - * Returns: No active command at this time, so this means - * that each time we got some kind of response the - * last time through. Tell the mid-level code to - * request sense information in order to decide what - * to do next. - * - ****************************************************************/ -int Pci2000_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags) - { - return SCSI_RESET_PUNT; - } -/**************************************************************** - * Name: Pci2000_Release - * - * Description: Release resources allocated for a single each adapter. - * - * Parameters: pshost - Pointer to SCSI command structure. - * - * Returns: zero. - * - ****************************************************************/ -int Pci2000_Release (struct Scsi_Host *pshost) - { - PADAPTER2000 padapter = HOSTDATA (pshost); - - if ( padapter->irqOwned ) - free_irq (pshost->irq, padapter); - pci_free_consistent (padapter->pdev, consistentLen, padapter->dev[0][0].scatGath, padapter->dev[0][0].scatGathDma); - release_region (pshost->io_port, pshost->n_io_port); - scsi_unregister(pshost); - return 0; - } - -/**************************************************************** - * Name: Pci2000_BiosParam - * - * Description: Process the biosparam request from the SCSI manager to - * return C/H/S data. - * - * Parameters: disk - Pointer to SCSI disk structure. - * dev - Major/minor number from kernel. - * geom - Pointer to integer array to place geometry data. - * - * Returns: zero. - * - ****************************************************************/ -int Pci2000_BiosParam (struct scsi_device *sdev, struct block_device *dev, - sector_t capacity, int geom[]) - { - PADAPTER2000 padapter; - - padapter = HOSTDATA(sdev->host); - - if ( WaitReady (padapter) ) - return 0; - outb_p (sdev->id, padapter->mb0); - outb_p (CMD_GET_PARMS, padapter->cmd); - if ( WaitReady (padapter) ) - return 0; - - geom[0] = inb_p (padapter->mb2 + 3); - geom[1] = inb_p (padapter->mb2 + 2); - geom[2] = inw_p (padapter->mb2); - return 0; - } - - -MODULE_LICENSE("Dual BSD/GPL"); - -static Scsi_Host_Template driver_template = { - .proc_name = "pci2000", - .name = "PCI-2000 SCSI Intelligent Disk Controller", - .detect = Pci2000_Detect, - .release = Pci2000_Release, - .queuecommand = Pci2000_QueueCommand, - .abort = Pci2000_Abort, - .reset = Pci2000_Reset, - .bios_param = Pci2000_BiosParam, - .can_queue = 16, - .this_id = -1, - .sg_tablesize = 16, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" diff --git a/drivers/scsi/pci2220i.c b/drivers/scsi/pci2220i.c deleted file mode 100644 index e395e4203154..000000000000 --- a/drivers/scsi/pci2220i.c +++ /dev/null @@ -1,2915 +0,0 @@ -/**************************************************************************** - * Perceptive Solutions, Inc. PCI-2220I device driver for Linux. - * - * pci2220i.c - Linux Host Driver for PCI-2220I EIDE RAID Adapters - * - * Copyright (c) 1997-1999 Perceptive Solutions, Inc. - * All Rights Reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that redistributions of source - * code retain the above copyright notice and this comment without - * modification. - * - * Technical updates and product information at: - * http://www.psidisk.com - * - * Please send questions, comments, bug reports to: - * tech@psidisk.com Technical Support - * - * - * Revisions 1.10 Mar-26-1999 - * - Updated driver for RAID and hot reconstruct support. - * - * Revisions 1.11 Mar-26-1999 - * - Fixed spinlock and PCI configuration. - * - * Revision 2.00 December-1-1999 - * - Added code for the PCI-2240I controller - * - Added code for ATAPI devices. - * - Double buffer for scatter/gather support - * - * Revision 2.10 March-27-2000 - * - Added support for dynamic DMA - * - ****************************************************************************/ - -#error Convert me to understand page+offset based scatterlists - -//#define DEBUG 1 - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include "scsi.h" -#include -#include "pci2220i.h" -#include "psi_dale.h" - - -#define PCI2220I_VERSION "2.10" -#define READ_CMD IDE_CMD_READ_MULTIPLE -#define WRITE_CMD IDE_CMD_WRITE_MULTIPLE -#define MAX_BUS_MASTER_BLOCKS SECTORSXFER // This is the maximum we can bus master - -#ifdef DEBUG -#define DEB(x) x -#define STOP_HERE() {int st;for(st=0;st<100;st++){st=1;}} -#else -#define DEB(x) -#define STOP_HERE() -#endif - -#define MAXADAPTER 4 // Increase this and the sizes of the arrays below, if you need more. - - -typedef struct - { - UCHAR byte6; // device select register image - UCHAR spigot; // spigot number - UCHAR spigots[2]; // RAID spigots - UCHAR deviceID[2]; // device ID codes - USHORT sectors; // number of sectors per track - USHORT heads; // number of heads - USHORT cylinders; // number of cylinders for this device - USHORT spareword; // placeholder - ULONG blocks; // number of blocks on device - DISK_MIRROR DiskMirror[2]; // RAID status and control - ULONG lastsectorlba[2]; // last addressable sector on the drive - USHORT raid; // RAID active flag - USHORT mirrorRecon; - UCHAR reconOn; - USHORT reconCount; - USHORT reconIsStarting; // indicate hot reconstruct is starting - UCHAR cmdDrqInt; // flag for command interrupt - UCHAR packet; // command packet size in bytes - } OUR_DEVICE, *POUR_DEVICE; - -typedef struct - { - USHORT bigD; // identity is a PCI-2240I if true, otherwise a PCI-2220I - USHORT atapi; // this interface is for ATAPI devices only - ULONG regDmaDesc; // address of the DMA discriptor register for direction of transfer - ULONG regDmaCmdStat; // Byte #1 of DMA command status register - ULONG regDmaAddrPci; // 32 bit register for PCI address of DMA - ULONG regDmaAddrLoc; // 32 bit register for local bus address of DMA - ULONG regDmaCount; // 32 bit register for DMA transfer count - ULONG regDmaMode; // 32 bit register for DMA mode control - ULONG regRemap; // 32 bit local space remap - ULONG regDesc; // 32 bit local region descriptor - ULONG regRange; // 32 bit local range - ULONG regIrqControl; // 16 bit Interrupt enable/disable and status - ULONG regScratchPad; // scratch pad I/O base address - ULONG regBase; // Base I/O register for data space - ULONG regData; // data register I/O address - ULONG regError; // error register I/O address - ULONG regSectCount; // sector count register I/O address - ULONG regLba0; // least significant byte of LBA - ULONG regLba8; // next least significant byte of LBA - ULONG regLba16; // next most significan byte of LBA - ULONG regLba24; // head and most 4 significant bits of LBA - ULONG regStatCmd; // status on read and command on write register - ULONG regStatSel; // board status on read and spigot select on write register - ULONG regFail; // fail bits control register - ULONG regAltStat; // alternate status and drive control register - ULONG basePort; // PLX base I/O port - USHORT timingMode; // timing mode currently set for adapter - USHORT timingPIO; // TRUE if PIO timing is active - struct pci_dev *pcidev; - ULONG timingAddress; // address to use on adapter for current timing mode - ULONG irqOwned; // owned IRQ or zero if shared - UCHAR numberOfDrives; // saved number of drives on this controller - UCHAR failRegister; // current inverted data in fail register - OUR_DEVICE device[BIGD_MAXDRIVES]; - DISK_MIRROR *raidData[BIGD_MAXDRIVES]; - ULONG startSector; - USHORT sectorCount; - ULONG readCount; - UCHAR *currentSgBuffer; - ULONG currentSgCount; - USHORT nextSg; - UCHAR cmd; - Scsi_Cmnd *SCpnt; - POUR_DEVICE pdev; // current device opearating on - USHORT devInReconIndex; - USHORT expectingIRQ; - USHORT reconOn; // Hot reconstruct is to be done. - USHORT reconPhase; // Hot reconstruct operation is in progress. - ULONG reconSize; - USHORT demoFail; // flag for RAID failure demonstration - USHORT survivor; - USHORT failinprog; - struct timer_list reconTimer; - struct timer_list timer; - UCHAR *kBuffer; - dma_addr_t kBufferDma; - UCHAR reqSense; - UCHAR atapiCdb[16]; - UCHAR atapiSpecial; - } ADAPTER2220I, *PADAPTER2220I; - -#define HOSTDATA(host) ((PADAPTER2220I)&host->hostdata) - -#define RECON_PHASE_READY 0x01 -#define RECON_PHASE_COPY 0x02 -#define RECON_PHASE_UPDATE 0x03 -#define RECON_PHASE_LAST 0x04 -#define RECON_PHASE_END 0x07 -#define RECON_PHASE_MARKING 0x80 -#define RECON_PHASE_FAILOVER 0xFF - -static struct Scsi_Host *PsiHost[MAXADAPTER] = {NULL,}; // One for each adapter -static int NumAdapters = 0; -static int Installed = 0; -static SETUP DaleSetup; -static DISK_MIRROR DiskMirror[BIGD_MAXDRIVES]; -static ULONG ModeArray[] = {DALE_DATA_MODE2, DALE_DATA_MODE3, DALE_DATA_MODE4, DALE_DATA_MODE5}; -static ULONG ModeArray2[] = {BIGD_DATA_MODE2, BIGD_DATA_MODE3, BIGD_DATA_MODE4, BIGD_DATA_MODE5}; - -static void ReconTimerExpiry (unsigned long data); - -/******************************************************************************************************* - * Name: Alarm - * - * Description: Sound the for the given device - * - * Parameters: padapter - Pointer adapter data structure. - * device - Device number. - * - * Returns: Nothing. - * - ******************************************************************************************************/ -static void Alarm (PADAPTER2220I padapter, UCHAR device) - { - UCHAR zc; - - if ( padapter->bigD ) - { - zc = device | (FAIL_ANY | FAIL_AUDIBLE); - if ( padapter->failRegister & FAIL_ANY ) - zc |= FAIL_MULTIPLE; - - padapter->failRegister = zc; - outb_p (~zc, padapter->regFail); - } - else - outb_p (0x3C | (1 << device), padapter->regFail); // sound alarm and set fail light - } -/**************************************************************** - * Name: MuteAlarm :LOCAL - * - * Description: Mute the audible alarm. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static void MuteAlarm (PADAPTER2220I padapter) - { - UCHAR old; - - if ( padapter->bigD ) - { - padapter->failRegister &= ~FAIL_AUDIBLE; - outb_p (~padapter->failRegister, padapter->regFail); - } - else - { - old = (inb_p (padapter->regStatSel) >> 3) | (inb_p (padapter->regStatSel) & 0x83); - outb_p (old | 0x40, padapter->regFail); - } - } -/**************************************************************** - * Name: WaitReady :LOCAL - * - * Description: Wait for device ready. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int WaitReady (PADAPTER2220I padapter) - { - ULONG z; - UCHAR status; - - for ( z = 0; z < (TIMEOUT_READY * 4); z++ ) - { - status = inb_p (padapter->regStatCmd); - if ( (status & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY ) - return 0; - udelay (250); - } - return status; - } -/**************************************************************** - * Name: WaitReadyReset :LOCAL - * - * Description: Wait for device ready. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int WaitReadyReset (PADAPTER2220I padapter) - { - ULONG z; - UCHAR status; - - for ( z = 0; z < (125 * 16); z++ ) // wait up to 1/4 second - { - status = inb_p (padapter->regStatCmd); - if ( (status & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY ) - { - DEB (printk ("\nPCI2220I: Reset took %ld mSec to be ready", z / 8)); - return 0; - } - udelay (125); - } - DEB (printk ("\nPCI2220I: Reset took more than 2 Seconds to come ready, Disk Failure")); - return status; - } -/**************************************************************** - * Name: WaitDrq :LOCAL - * - * Description: Wait for device ready for data transfer. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int WaitDrq (PADAPTER2220I padapter) - { - ULONG z; - UCHAR status; - - for ( z = 0; z < (TIMEOUT_DRQ * 4); z++ ) - { - status = inb_p (padapter->regStatCmd); - if ( status & IDE_STATUS_DRQ ) - return 0; - udelay (250); - } - return status; - } -/**************************************************************** - * Name: AtapiWaitReady :LOCAL - * - * Description: Wait for device busy and DRQ to be cleared. - * - * Parameters: padapter - Pointer adapter data structure. - * msec - Number of milliseconds to wait. - * - * Returns: TRUE if drive does not clear busy in time. - * - ****************************************************************/ -static int AtapiWaitReady (PADAPTER2220I padapter, int msec) - { - int z; - - for ( z = 0; z < (msec * 16); z++ ) - { - if ( !(inb_p (padapter->regStatCmd) & (IDE_STATUS_BUSY | IDE_STATUS_DRQ)) ) - return FALSE; - udelay (125); - } - return TRUE; - } -/**************************************************************** - * Name: AtapiWaitDrq :LOCAL - * - * Description: Wait for device ready for data transfer. - * - * Parameters: padapter - Pointer adapter data structure. - * msec - Number of milliseconds to wait. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int AtapiWaitDrq (PADAPTER2220I padapter, int msec) - { - ULONG z; - - for ( z = 0; z < (msec * 16); z++ ) - { - if ( inb_p (padapter->regStatCmd) & IDE_STATUS_DRQ ) - return 0; - udelay (128); - } - return TRUE; - } -/**************************************************************** - * Name: HardReset :LOCAL - * - * Description: Wait for device ready for data transfer. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device. - * spigot - Spigot number. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int HardReset (PADAPTER2220I padapter, POUR_DEVICE pdev, UCHAR spigot) - { - DEB (printk ("\npci2220i:RESET spigot = %X devices = %d, %d", spigot, pdev->deviceID[0], pdev->deviceID[1])); - mdelay (100); // just wait 100 mSec to let drives flush - SelectSpigot (padapter, spigot | SEL_IRQ_OFF); - - outb_p (0x0E, padapter->regAltStat); // reset the suvivor - udelay (100); // wait a little - outb_p (0x08, padapter->regAltStat); // clear the reset - udelay (100); - - outb_p (0xA0, padapter->regLba24); // select the master drive - if ( WaitReadyReset (padapter) ) - { - DEB (printk ("\npci2220i: master not ready after reset")); - return TRUE; - } - outb_p (0xB0, padapter->regLba24); // try the slave drive - if ( (inb_p (padapter->regStatCmd) & (IDE_STATUS_DRDY | IDE_STATUS_BUSY)) == IDE_STATUS_DRDY ) - { - DEB (printk ("\nPCI2220I: initializing slave drive on spigot %X", spigot)); - outb_p (SECTORSXFER, padapter->regSectCount); - WriteCommand (padapter, IDE_CMD_SET_MULTIPLE); - if ( WaitReady (padapter) ) - { - DEB (printk ("\npci2220i: slave not ready after set multiple")); - return TRUE; - } - } - - outb_p (0xA0, padapter->regLba24); // select the drive - outb_p (SECTORSXFER, padapter->regSectCount); - WriteCommand (padapter, IDE_CMD_SET_MULTIPLE); - if ( WaitReady (padapter) ) - { - DEB (printk ("\npci2220i: master not ready after set multiple")); - return TRUE; - } - return FALSE; - } -/**************************************************************** - * Name: AtapiReset :LOCAL - * - * Description: Wait for device ready for data transfer. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device. - * - * Returns: TRUE if drive does not come ready. - * - ****************************************************************/ -static int AtapiReset (PADAPTER2220I padapter, POUR_DEVICE pdev) - { - SelectSpigot (padapter, pdev->spigot); - AtapiDevice (padapter, pdev->byte6); - AtapiCountLo (padapter, 0); - AtapiCountHi (padapter, 0); - WriteCommand (padapter, IDE_COMMAND_ATAPI_RESET); - udelay (125); - if ( AtapiWaitReady (padapter, 1000) ) - return TRUE; - if ( inb_p (padapter->regStatCmd) || (inb_p (padapter->regLba8) != 0x14) || (inb_p (padapter->regLba16) != 0xEB) ) - return TRUE; - return FALSE; - } -/**************************************************************** - * Name: WalkScatGath :LOCAL - * - * Description: Transfer data to/from scatter/gather buffers. - * - * Parameters: padapter - Pointer adapter data structure. - * datain - TRUE if data read. - * length - Number of bytes to transfer. - * - * Returns: Nothing. - * - ****************************************************************/ -static void WalkScatGath (PADAPTER2220I padapter, UCHAR datain, ULONG length) - { - ULONG count; - UCHAR *buffer = padapter->kBuffer; - - while ( length ) - { - count = ( length > padapter->currentSgCount ) ? padapter->currentSgCount : length; - - if ( datain ) - memcpy (padapter->currentSgBuffer, buffer, count); - else - memcpy (buffer, padapter->currentSgBuffer, count); - - padapter->currentSgCount -= count; - if ( !padapter->currentSgCount ) - { - if ( padapter->nextSg < padapter->SCpnt->use_sg ) - { - padapter->currentSgBuffer = ((struct scatterlist *)padapter->SCpnt->request_buffer)[padapter->nextSg].address; - padapter->currentSgCount = ((struct scatterlist *)padapter->SCpnt->request_buffer)[padapter->nextSg].length; - padapter->nextSg++; - } - } - else - padapter->currentSgBuffer += count; - - length -= count; - buffer += count; - } - } -/**************************************************************** - * Name: BusMaster :LOCAL - * - * Description: Do a bus master I/O. - * - * Parameters: padapter - Pointer adapter data structure. - * datain - TRUE if data read. - * irq - TRUE if bus master interrupt expected. - * - * Returns: Nothing. - * - ****************************************************************/ -static void BusMaster (PADAPTER2220I padapter, UCHAR datain, UCHAR irq) - { - ULONG zl; - - zl = ( padapter->sectorCount > MAX_BUS_MASTER_BLOCKS ) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount; - padapter->sectorCount -= zl; - zl *= (ULONG)BYTES_PER_SECTOR; - - if ( datain ) - { - padapter->readCount = zl; - outb_p (8, padapter->regDmaDesc); // read operation - if ( padapter->bigD ) - { - if ( irq && !padapter->sectorCount ) - outb_p (0x0C, padapter->regDmaMode); // interrupt on - else - outb_p (0x08, padapter->regDmaMode); // no interrupt - } - else - { - if ( irq && !padapter->sectorCount ) - outb_p (0x05, padapter->regDmaMode); // interrupt on - else - outb_p (0x01, padapter->regDmaMode); // no interrupt - } - } - else - { - outb_p (0x00, padapter->regDmaDesc); // write operation - if ( padapter->bigD ) - outb_p (0x08, padapter->regDmaMode); // no interrupt - else - outb_p (0x01, padapter->regDmaMode); // no interrupt - WalkScatGath (padapter, FALSE, zl); - } - - outl (padapter->timingAddress, padapter->regDmaAddrLoc); - outl (padapter->kBufferDma, padapter->regDmaAddrPci); - outl (zl, padapter->regDmaCount); - outb_p (0x03, padapter->regDmaCmdStat); // kick the DMA engine in gear - } -/**************************************************************** - * Name: AtapiBusMaster :LOCAL - * - * Description: Do a bus master I/O. - * - * Parameters: padapter - Pointer adapter data structure. - * datain - TRUE if data read. - * length - Number of bytes to transfer. - * - * Returns: Nothing. - * - ****************************************************************/ -static void AtapiBusMaster (PADAPTER2220I padapter, UCHAR datain, ULONG length) - { - outl (padapter->timingAddress, padapter->regDmaAddrLoc); - outl (padapter->kBufferDma, padapter->regDmaAddrPci); - outl (length, padapter->regDmaCount); - if ( datain ) - { - if ( padapter->readCount ) - WalkScatGath (padapter, TRUE, padapter->readCount); - outb_p (0x08, padapter->regDmaDesc); // read operation - outb_p (0x08, padapter->regDmaMode); // no interrupt - padapter->readCount = length; - } - else - { - outb_p (0x00, padapter->regDmaDesc); // write operation - outb_p (0x08, padapter->regDmaMode); // no interrupt - if ( !padapter->atapiSpecial ) - WalkScatGath (padapter, FALSE, length); - } - outb_p (0x03, padapter->regDmaCmdStat); // kick the DMA engine in gear - } -/**************************************************************** - * Name: WriteData :LOCAL - * - * Description: Write data to device. - * - * Parameters: padapter - Pointer adapter data structure. - * - * Returns: TRUE if drive does not assert DRQ in time. - * - ****************************************************************/ -static int WriteData (PADAPTER2220I padapter) - { - ULONG zl; - - if ( !WaitDrq (padapter) ) - { - if ( padapter->timingPIO ) - { - zl = (padapter->sectorCount > MAX_BUS_MASTER_BLOCKS) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount; - WalkScatGath (padapter, FALSE, zl * BYTES_PER_SECTOR); - outsw (padapter->regData, padapter->kBuffer, zl * (BYTES_PER_SECTOR / 2)); - padapter->sectorCount -= zl; - } - else - BusMaster (padapter, 0, 0); - return 0; - } - padapter->cmd = 0; // null out the command byte - return 1; - } -/**************************************************************** - * Name: WriteDataBoth :LOCAL - * - * Description: Write data to device. - * - * Parameters: padapter - Pointer to adapter structure. - * pdev - Pointer to device structure - * - * Returns: Index + 1 of drive not failed or zero for OK. - * - ****************************************************************/ -static int WriteDataBoth (PADAPTER2220I padapter, POUR_DEVICE pdev) - { - ULONG zl; - UCHAR status0, status1; - - SelectSpigot (padapter, pdev->spigots[0]); - status0 = WaitDrq (padapter); - if ( !status0 ) - { - SelectSpigot (padapter, pdev->spigots[1]); - status1 = WaitDrq (padapter); - if ( !status1 ) - { - SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1] | padapter->bigD); - if ( padapter->timingPIO ) - { - zl = (padapter->sectorCount > MAX_BUS_MASTER_BLOCKS) ? MAX_BUS_MASTER_BLOCKS : padapter->sectorCount; - WalkScatGath (padapter, FALSE, zl * BYTES_PER_SECTOR); - outsw (padapter->regData, padapter->kBuffer, zl * (BYTES_PER_SECTOR / 2)); - padapter->sectorCount -= zl; - } - else - BusMaster (padapter, 0, 0); - return 0; - } - } - padapter->cmd = 0; // null out the command byte - if ( status0 ) - return 2; - return 1; - } -/**************************************************************** - * Name: IdeCmd :LOCAL - * - * Description: Process an IDE command. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device. - * - * Returns: Zero if no error or status register contents on error. - * - ****************************************************************/ -static UCHAR IdeCmd (PADAPTER2220I padapter, POUR_DEVICE pdev) - { - UCHAR status; - - SelectSpigot (padapter, pdev->spigot | padapter->bigD); // select the spigot - outb_p (pdev->byte6 | ((UCHAR *)(&padapter->startSector))[3], padapter->regLba24); // select the drive - status = WaitReady (padapter); - if ( !status ) - { - outb_p (padapter->sectorCount, padapter->regSectCount); - outb_p (((UCHAR *)(&padapter->startSector))[0], padapter->regLba0); - outb_p (((UCHAR *)(&padapter->startSector))[1], padapter->regLba8); - outb_p (((UCHAR *)(&padapter->startSector))[2], padapter->regLba16); - padapter->expectingIRQ = TRUE; - WriteCommand (padapter, padapter->cmd); - return 0; - } - - padapter->cmd = 0; // null out the command byte - return status; - } -/**************************************************************** - * Name: IdeCmdBoth :LOCAL - * - * Description: Process an IDE command to both drivers. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device structure - * - * Returns: Index + 1 of drive not failed or zero for OK. - * - ****************************************************************/ -static UCHAR IdeCmdBoth (PADAPTER2220I padapter, POUR_DEVICE pdev) - { - UCHAR status0; - UCHAR status1; - - SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]); // select the spigots - outb_p (padapter->pdev->byte6 | ((UCHAR *)(&padapter->startSector))[3], padapter->regLba24);// select the drive - SelectSpigot (padapter, pdev->spigots[0]); - status0 = WaitReady (padapter); - if ( !status0 ) - { - SelectSpigot (padapter, pdev->spigots[1]); - status1 = WaitReady (padapter); - if ( !status1 ) - { - SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1] | padapter->bigD); - outb_p (padapter->sectorCount, padapter->regSectCount); - outb_p (((UCHAR *)(&padapter->startSector))[0], padapter->regLba0); - outb_p (((UCHAR *)(&padapter->startSector))[1], padapter->regLba8); - outb_p (((UCHAR *)(&padapter->startSector))[2], padapter->regLba16); - padapter->expectingIRQ = TRUE; - WriteCommand (padapter, padapter->cmd); - return 0; - } - } - padapter->cmd = 0; // null out the command byte - if ( status0 ) - return 2; - return 1; - } -/**************************************************************** - * Name: OpDone :LOCAL - * - * Description: Complete an operatoin done sequence. - * - * Parameters: padapter - Pointer to host data block. - * spigot - Spigot select code. - * device - Device byte code. - * - * Returns: Nothing. - * - ****************************************************************/ -static void OpDone (PADAPTER2220I padapter, ULONG result) - { - Scsi_Cmnd *SCpnt = padapter->SCpnt; - - if ( padapter->reconPhase ) - { - padapter->reconPhase = 0; - if ( padapter->SCpnt ) - { - Pci2220i_QueueCommand (SCpnt, SCpnt->scsi_done); - } - else - { - if ( padapter->reconOn ) - { - ReconTimerExpiry ((unsigned long)padapter); - } - } - } - else - { - padapter->cmd = 0; - padapter->SCpnt = NULL; - padapter->pdev = NULL; - SCpnt->result = result; - SCpnt->scsi_done (SCpnt); - if ( padapter->reconOn && !padapter->reconTimer.data ) - { - padapter->reconTimer.expires = jiffies + (HZ / 4); // start in 1/4 second - padapter->reconTimer.data = (unsigned long)padapter; - add_timer (&padapter->reconTimer); - } - } - } -/**************************************************************** - * Name: InlineIdentify :LOCAL - * - * Description: Do an intline inquiry on a drive. - * - * Parameters: padapter - Pointer to host data block. - * spigot - Spigot select code. - * device - Device byte code. - * - * Returns: Last addressable sector or zero if none. - * - ****************************************************************/ -static ULONG InlineIdentify (PADAPTER2220I padapter, UCHAR spigot, UCHAR device) - { - PIDENTIFY_DATA pid = (PIDENTIFY_DATA)padapter->kBuffer; - - SelectSpigot (padapter, spigot | SEL_IRQ_OFF); // select the spigot - outb_p ((device << 4) | 0xA0, padapter->regLba24); // select the drive - if ( WaitReady (padapter) ) - return 0; - WriteCommand (padapter, IDE_COMMAND_IDENTIFY); - if ( WaitDrq (padapter) ) - return 0; - insw (padapter->regData, padapter->kBuffer, sizeof (IDENTIFY_DATA) >> 1); - return (pid->LBATotalSectors - 1); - } -/**************************************************************** - * Name: AtapiIdentify :LOCAL - * - * Description: Do an intline inquiry on a drive. - * - * Parameters: padapter - Pointer to host data block. - * pdev - Pointer to device table. - * - * Returns: TRUE on error. - * - ****************************************************************/ -static ULONG AtapiIdentify (PADAPTER2220I padapter, POUR_DEVICE pdev) - { - ATAPI_GENERAL_0 ag0; - USHORT zs; - int z; - - AtapiDevice (padapter, pdev->byte6); - WriteCommand (padapter, IDE_COMMAND_ATAPI_IDENTIFY); - if ( AtapiWaitDrq (padapter, 3000) ) - return TRUE; - - *(USHORT *)&ag0 = inw_p (padapter->regData); - for ( z = 0; z < 255; z++ ) - zs = inw_p (padapter->regData); - - if ( ag0.ProtocolType == 2 ) - { - if ( ag0.CmdDrqType == 1 ) - pdev->cmdDrqInt = TRUE; - switch ( ag0.CmdPacketSize ) - { - case 0: - pdev->packet = 6; - break; - case 1: - pdev->packet = 8; - break; - default: - pdev->packet = 6; - break; - } - return FALSE; - } - return TRUE; - } -/**************************************************************** - * Name: Atapi2Scsi - * - * Description: Convert ATAPI data to SCSI data. - * - * Parameters: padapter - Pointer adapter data structure. - * SCpnt - Pointer to SCSI command structure. - * - * Returns: Nothing. - * - ****************************************************************/ -void Atapi2Scsi (PADAPTER2220I padapter, Scsi_Cmnd *SCpnt) - { - UCHAR *buff = padapter->currentSgBuffer; - - switch ( SCpnt->cmnd[0] ) - { - case SCSIOP_MODE_SENSE: - buff[0] = padapter->kBuffer[1]; - buff[1] = padapter->kBuffer[2]; - buff[2] = padapter->kBuffer[3]; - buff[3] = padapter->kBuffer[7]; - memcpy (&buff[4], &padapter->kBuffer[8], padapter->atapiCdb[8] - 8); - break; - case SCSIOP_INQUIRY: - padapter->kBuffer[2] = 2; - memcpy (buff, padapter->kBuffer, padapter->currentSgCount); - break; - default: - if ( padapter->readCount ) - WalkScatGath (padapter, TRUE, padapter->readCount); - break; - } - } -/**************************************************************** - * Name: Scsi2Atapi - * - * Description: Convert SCSI packet command to Atapi packet command. - * - * Parameters: padapter - Pointer adapter data structure. - * SCpnt - Pointer to SCSI command structure. - * - * Returns: Nothing. - * - ****************************************************************/ -static void Scsi2Atapi (PADAPTER2220I padapter, Scsi_Cmnd *SCpnt) - { - UCHAR *cdb = SCpnt->cmnd; - UCHAR *buff = padapter->currentSgBuffer; - - switch (cdb[0]) - { - case SCSIOP_READ6: - padapter->atapiCdb[0] = SCSIOP_READ; - padapter->atapiCdb[1] = cdb[1] & 0xE0; - padapter->atapiCdb[3] = cdb[1] & 0x1F; - padapter->atapiCdb[4] = cdb[2]; - padapter->atapiCdb[5] = cdb[3]; - padapter->atapiCdb[8] = cdb[4]; - padapter->atapiCdb[9] = cdb[5]; - break; - case SCSIOP_WRITE6: - padapter->atapiCdb[0] = SCSIOP_WRITE; - padapter->atapiCdb[1] = cdb[1] & 0xE0; - padapter->atapiCdb[3] = cdb[1] & 0x1F; - padapter->atapiCdb[4] = cdb[2]; - padapter->atapiCdb[5] = cdb[3]; - padapter->atapiCdb[8] = cdb[4]; - padapter->atapiCdb[9] = cdb[5]; - break; - case SCSIOP_MODE_SENSE: - padapter->atapiCdb[0] = SCSIOP_MODE_SENSE10; - padapter->atapiCdb[2] = cdb[2]; - padapter->atapiCdb[8] = cdb[4] + 4; - break; - - case SCSIOP_MODE_SELECT: - padapter->atapiSpecial = TRUE; - padapter->atapiCdb[0] = SCSIOP_MODE_SELECT10; - padapter->atapiCdb[1] = cdb[1] | 0x10; - memcpy (padapter->kBuffer, buff, 4); - padapter->kBuffer[4] = padapter->kBuffer[5] = 0; - padapter->kBuffer[6] = padapter->kBuffer[7] = 0; - memcpy (&padapter->kBuffer[8], &buff[4], cdb[4] - 4); - padapter->atapiCdb[8] = cdb[4] + 4; - break; - } - } -/**************************************************************** - * Name: AtapiSendCdb - * - * Description: Send the CDB packet to the device. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device. - * cdb - Pointer to 16 byte SCSI cdb. - * - * Returns: Nothing. - * - ****************************************************************/ -static void AtapiSendCdb (PADAPTER2220I padapter, POUR_DEVICE pdev, CHAR *cdb) - { - DEB (printk ("\nPCI2242I: CDB: %X %X %X %X %X %X %X %X %X %X %X %X", cdb[0], cdb[1], cdb[2], cdb[3], cdb[4], cdb[5], cdb[6], cdb[7], cdb[8], cdb[9], cdb[10], cdb[11])); - outsw (padapter->regData, cdb, pdev->packet); - } -/**************************************************************** - * Name: AtapiRequestSense - * - * Description: Send the CDB packet to the device. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device. - * SCpnt - Pointer to SCSI command structure. - * pass - If true then this is the second pass to send cdb. - * - * Returns: TRUE on error. - * - ****************************************************************/ -static int AtapiRequestSense (PADAPTER2220I padapter, POUR_DEVICE pdev, Scsi_Cmnd *SCpnt, UCHAR pass) - { - UCHAR cdb[16] = {SCSIOP_REQUEST_SENSE,0,0,0,16,0,0,0,0,0,0,0,0,0,0,0}; - - DEB (printk ("\nPCI2242I: AUTO REQUEST SENSE")); - cdb[4] = (UCHAR)(sizeof (SCpnt->sense_buffer)); - if ( !pass ) - { - padapter->reqSense = TRUE; - AtapiCountLo (padapter, cdb[4]); - AtapiCountHi (padapter, 0); - outb_p (0, padapter->regError); - WriteCommand (padapter, IDE_COMMAND_ATAPI_PACKET); - if ( pdev->cmdDrqInt ) - return FALSE; - - if ( AtapiWaitDrq (padapter, 500) ) - return TRUE; - } - AtapiSendCdb (padapter, pdev, cdb); - return FALSE; - } -/**************************************************************** - * Name: InlineReadSignature :LOCAL - * - * Description: Do an inline read RAID sigature. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to device. - * index - index of data to read. - * - * Returns: Zero if no error or status register contents on error. - * - ****************************************************************/ -static UCHAR InlineReadSignature (PADAPTER2220I padapter, POUR_DEVICE pdev, int index) - { - UCHAR status; - ULONG zl = pdev->lastsectorlba[index]; - - SelectSpigot (padapter, pdev->spigots[index] | SEL_IRQ_OFF); // select the spigot without interrupts - outb_p (pdev->byte6 | ((UCHAR *)&zl)[3], padapter->regLba24); - status = WaitReady (padapter); - if ( !status ) - { - outb_p (((UCHAR *)&zl)[2], padapter->regLba16); - outb_p (((UCHAR *)&zl)[1], padapter->regLba8); - outb_p (((UCHAR *)&zl)[0], padapter->regLba0); - outb_p (1, padapter->regSectCount); - WriteCommand (padapter, IDE_COMMAND_READ); - status = WaitDrq (padapter); - if ( !status ) - { - insw (padapter->regData, padapter->kBuffer, BYTES_PER_SECTOR / 2); - ((ULONG *)(&pdev->DiskMirror[index]))[0] = ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[0]; - ((ULONG *)(&pdev->DiskMirror[index]))[1] = ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[1]; - // some drives assert DRQ before IRQ so let's make sure we clear the IRQ - WaitReady (padapter); - return 0; - } - } - return status; - } -/**************************************************************** - * Name: DecodeError :LOCAL - * - * Description: Decode and process device errors. - * - * Parameters: padapter - Pointer to adapter data. - * status - Status register code. - * - * Returns: The driver status code. - * - ****************************************************************/ -static ULONG DecodeError (PADAPTER2220I padapter, UCHAR status) - { - UCHAR error; - - padapter->expectingIRQ = 0; - if ( status & IDE_STATUS_WRITE_FAULT ) - { - return DID_PARITY << 16; - } - if ( status & IDE_STATUS_BUSY ) - return DID_BUS_BUSY << 16; - - error = inb_p (padapter->regError); - DEB(printk ("\npci2220i error register: %x", error)); - switch ( error ) - { - case IDE_ERROR_AMNF: - case IDE_ERROR_TKONF: - case IDE_ERROR_ABRT: - case IDE_ERROR_IDFN: - case IDE_ERROR_UNC: - case IDE_ERROR_BBK: - default: - return DID_ERROR << 16; - } - return DID_ERROR << 16; - } -/**************************************************************** - * Name: StartTimer :LOCAL - * - * Description: Start the timer. - * - * Parameters: ipadapter - Pointer adapter data structure. - * - * Returns: Nothing. - * - ****************************************************************/ -static void StartTimer (PADAPTER2220I padapter) - { - padapter->timer.expires = jiffies + TIMEOUT_DATA; - add_timer (&padapter->timer); - } -/**************************************************************** - * Name: WriteSignature :LOCAL - * - * Description: Start the timer. - * - * Parameters: padapter - Pointer adapter data structure. - * pdev - Pointer to our device. - * spigot - Selected spigot. - * index - index of mirror signature on device. - * - * Returns: TRUE on any error. - * - ****************************************************************/ -static int WriteSignature (PADAPTER2220I padapter, POUR_DEVICE pdev, UCHAR spigot, int index) - { - ULONG zl; - - SelectSpigot (padapter, spigot); - zl = pdev->lastsectorlba[index]; - outb_p (pdev->byte6 | ((UCHAR *)&zl)[3], padapter->regLba24); - outb_p (((UCHAR *)&zl)[2], padapter->regLba16); - outb_p (((UCHAR *)&zl)[1], padapter->regLba8); - outb_p (((UCHAR *)&zl)[0], padapter->regLba0); - outb_p (1, padapter->regSectCount); - - WriteCommand (padapter, IDE_COMMAND_WRITE); - if ( WaitDrq (padapter) ) - return TRUE; - StartTimer (padapter); - padapter->expectingIRQ = TRUE; - - ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[0] = ((ULONG *)(&pdev->DiskMirror[index]))[0]; - ((ULONG *)(&padapter->kBuffer[DISK_MIRROR_POSITION]))[1] = ((ULONG *)(&pdev->DiskMirror[index]))[1]; - outsw (padapter->regData, padapter->kBuffer, BYTES_PER_SECTOR / 2); - return FALSE; - } -/******************************************************************************************************* - * Name: InitFailover - * - * Description: This is the beginning of the failover routine - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * padapter - Pointer adapter data structure. - * pdev - Pointer to our device. - * - * Returns: TRUE on error. - * - ******************************************************************************************************/ -static int InitFailover (PADAPTER2220I padapter, POUR_DEVICE pdev) - { - UCHAR spigot; - - DEB (printk ("\npci2220i: Initialize failover process - survivor = %d", pdev->deviceID[padapter->survivor])); - pdev->raid = FALSE; //initializes system for non raid mode - pdev->reconOn = FALSE; - spigot = pdev->spigots[padapter->survivor]; - - if ( pdev->DiskMirror[padapter->survivor].status & UCBF_REBUILD ) - { - DEB (printk ("\n failed, is survivor")); - return (TRUE); - } - - if ( HardReset (padapter, pdev, spigot) ) - { - DEB (printk ("\n failed, reset")); - return TRUE; - } - - Alarm (padapter, pdev->deviceID[padapter->survivor ^ 1]); - pdev->DiskMirror[padapter->survivor].status = UCBF_MIRRORED | UCBF_SURVIVOR; //clear present status - - if ( WriteSignature (padapter, pdev, spigot, padapter->survivor) ) - { - DEB (printk ("\n failed, write signature")); - return TRUE; - } - padapter->failinprog = TRUE; - return FALSE; - } -/**************************************************************** - * Name: TimerExpiry :LOCAL - * - * Description: Timer expiry routine. - * - * Parameters: data - Pointer adapter data structure. - * - * Returns: Nothing. - * - ****************************************************************/ -static void TimerExpiry (unsigned long data) - { - PADAPTER2220I padapter = (PADAPTER2220I)data; - struct Scsi_Host *host = padapter->SCpnt->device->host; - POUR_DEVICE pdev = padapter->pdev; - UCHAR status = IDE_STATUS_BUSY; - UCHAR temp, temp1; - unsigned long flags; - - /* - * Disable interrupts, if they aren't already disabled and acquire - * the I/O spinlock. - */ - spin_lock_irqsave (host->host_lock, flags); - DEB (printk ("\nPCI2220I: Timeout expired ")); - - if ( padapter->failinprog ) - { - DEB (printk ("in failover process")); - OpDone (padapter, DecodeError (padapter, inb_p (padapter->regStatCmd))); - goto timerExpiryDone; - } - - while ( padapter->reconPhase ) - { - DEB (printk ("in recon phase %X", padapter->reconPhase)); - switch ( padapter->reconPhase ) - { - case RECON_PHASE_MARKING: - case RECON_PHASE_LAST: - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0; - DEB (printk ("\npci2220i: FAILURE 1")); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DID_ERROR << 16); - goto timerExpiryDone; - - case RECON_PHASE_READY: - OpDone (padapter, DID_ERROR << 16); - goto timerExpiryDone; - - case RECON_PHASE_COPY: - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 2")); - DEB (printk ("\n spig/stat = %X", inb_p (padapter->regStatSel)); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DID_ERROR << 16); - goto timerExpiryDone; - - case RECON_PHASE_UPDATE: - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 3"))); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DID_ERROR << 16); - goto timerExpiryDone; - - case RECON_PHASE_END: - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 4")); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DID_ERROR << 16); - goto timerExpiryDone; - - default: - goto timerExpiryDone; - } - } - - while ( padapter->cmd ) - { - outb_p (0x08, padapter->regDmaCmdStat); // cancel interrupt from DMA engine - if ( pdev->raid ) - { - if ( padapter->cmd == WRITE_CMD ) - { - DEB (printk ("in RAID write operation")); - temp = ( pdev->spigot & (SEL_1 | SEL_2) ) ? SEL_1 : SEL_3; - if ( inb_p (padapter->regStatSel) & temp ) - { - DEB (printk ("\npci2220i: Determined A OK")); - SelectSpigot (padapter, temp | SEL_IRQ_OFF); // Masking the interrupt during spigot select - temp = inb_p (padapter->regStatCmd); - } - else - temp = IDE_STATUS_BUSY; - - temp1 = ( pdev->spigot & (SEL_1 | SEL_2) ) ? SEL_2 : SEL_4; - if ( inb (padapter->regStatSel) & temp1 ) - { - DEB (printk ("\npci2220i: Determined B OK")); - SelectSpigot (padapter, temp1 | SEL_IRQ_OFF); // Masking the interrupt during spigot select - temp1 = inb_p (padapter->regStatCmd); - } - else - temp1 = IDE_STATUS_BUSY; - - if ( (temp & IDE_STATUS_BUSY) || (temp1 & IDE_STATUS_BUSY) ) - { - DEB (printk ("\npci2220i: Status A: %X B: %X", temp & 0xFF, temp1 & 0xFF)); - if ( (temp & IDE_STATUS_BUSY) && (temp1 & IDE_STATUS_BUSY) ) - { - status = temp; - break; - } - else - { - if ( temp & IDE_STATUS_BUSY ) - padapter->survivor = 1; - else - padapter->survivor = 0; - if ( InitFailover (padapter, pdev) ) - { - status = inb_p (padapter->regStatCmd); - break; - } - goto timerExpiryDone; - } - } - } - else - { - DEB (printk ("in RAID read operation")); - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 6")); - if ( InitFailover (padapter, pdev) ) - { - status = inb_p (padapter->regStatCmd); - break; - } - goto timerExpiryDone; - } - } - else - { - DEB (printk ("in I/O operation")); - status = inb_p (padapter->regStatCmd); - } - break; - } - - OpDone (padapter, DecodeError (padapter, status)); - -timerExpiryDone:; - /* - * Release the I/O spinlock and restore the original flags - * which will enable interrupts if and only if they were - * enabled on entry. - */ - spin_unlock_irqrestore (host->host_lock, flags); - } -/**************************************************************** - * Name: SetReconstruct :LOCAL - * - * Description: Set the reconstruct up. - * - * Parameters: pdev - Pointer to device structure. - * index - Mirror index number. - * - * Returns: Number of sectors on new disk required. - * - ****************************************************************/ -static LONG SetReconstruct (POUR_DEVICE pdev, int index) - { - pdev->DiskMirror[index].status = UCBF_MIRRORED; // setup the flags - pdev->DiskMirror[index ^ 1].status = UCBF_MIRRORED | UCBF_REBUILD; - pdev->DiskMirror[index ^ 1].reconstructPoint = 0; // start the reconstruct - pdev->reconCount = 1990; // mark target drive early - return pdev->DiskMirror[index].reconstructPoint; - } -/**************************************************************** - * Name: ReconTimerExpiry :LOCAL - * - * Description: Reconstruct timer expiry routine. - * - * Parameters: data - Pointer adapter data structure. - * - * Returns: Nothing. - * - ****************************************************************/ -static void ReconTimerExpiry (unsigned long data) - { - PADAPTER2220I padapter = (PADAPTER2220I)data; - struct Scsi_Host *host = padapter->SCpnt->device->host; - POUR_DEVICE pdev; - ULONG testsize = 0; - PIDENTIFY_DATA pid; - USHORT minmode; - ULONG zl; - UCHAR zc; - USHORT z; - unsigned long flags; - - /* - * Disable interrupts, if they aren't already disabled and acquire - * the I/O spinlock. - */ - spin_lock_irqsave(host->host_lock, flags); - - if ( padapter->SCpnt ) - goto reconTimerExpiry; - - padapter->reconTimer.data = 0; - for ( z = padapter->devInReconIndex + 1; z < BIGD_MAXDRIVES; z++ ) - { - if ( padapter->device[z].reconOn ) - break; - } - if ( z < BIGD_MAXDRIVES ) - pdev = &padapter->device[z]; - else - { - for ( z = 0; z < BIGD_MAXDRIVES; z++ ) - { - if ( padapter->device[z].reconOn ) - break; - } - if ( z < BIGD_MAXDRIVES ) - pdev = &padapter->device[z]; - else - { - padapter->reconOn = FALSE; - goto reconTimerExpiry; - } - } - - padapter->devInReconIndex = z; - pid = (PIDENTIFY_DATA)padapter->kBuffer; - padapter->pdev = pdev; - if ( pdev->reconIsStarting ) - { - pdev->reconIsStarting = FALSE; - pdev->reconOn = FALSE; - - while ( (pdev->DiskMirror[0].signature == SIGNATURE) && (pdev->DiskMirror[1].signature == SIGNATURE) && - (pdev->DiskMirror[0].pairIdentifier == (pdev->DiskMirror[1].pairIdentifier ^ 1)) ) - { - if ( (pdev->DiskMirror[0].status & UCBF_MATCHED) && (pdev->DiskMirror[1].status & UCBF_MATCHED) ) - break; - - if ( pdev->DiskMirror[0].status & UCBF_SURVIVOR ) // is first drive survivor? - testsize = SetReconstruct (pdev, 0); - else - if ( pdev->DiskMirror[1].status & UCBF_SURVIVOR ) // is second drive survivor? - testsize = SetReconstruct (pdev, 1); - - if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) ) - { - if ( pdev->DiskMirror[0].status & UCBF_REBUILD ) - pdev->mirrorRecon = 0; - else - pdev->mirrorRecon = 1; - pdev->reconOn = TRUE; - } - break; - } - - if ( !pdev->reconOn ) - goto reconTimerExpiry; - - if ( padapter->bigD ) - { - padapter->failRegister = 0; - outb_p (~padapter->failRegister, padapter->regFail); - } - else - { - zc = ((inb_p (padapter->regStatSel) >> 3) | inb_p (padapter->regStatSel)) & 0x83; // mute the alarm - outb_p (0xFF, padapter->regFail); - } - - while ( 1 ) - { - DEB (printk ("\npci2220i: hard reset issue")); - if ( HardReset (padapter, pdev, pdev->spigots[pdev->mirrorRecon]) ) - { - DEB (printk ("\npci2220i: sub 1")); - break; - } - - pdev->lastsectorlba[pdev->mirrorRecon] = InlineIdentify (padapter, pdev->spigots[pdev->mirrorRecon], pdev->deviceID[pdev->mirrorRecon] & 1); - - if ( pdev->lastsectorlba[pdev->mirrorRecon] < testsize ) - { - DEB (printk ("\npci2220i: sub 2 %ld %ld", pdev->lastsectorlba[pdev->mirrorRecon], testsize)); - break; - } - - // test LBA and multiper sector transfer compatibility - if (!pid->SupportLBA || (pid->NumSectorsPerInt < SECTORSXFER) || !pid->Valid_64_70 ) - { - DEB (printk ("\npci2220i: sub 3")); - break; - } - - // test PIO/bus matering mode compatibility - if ( (pid->MinPIOCycleWithoutFlow > 240) && !pid->SupportIORDYDisable && !padapter->timingPIO ) - { - DEB (printk ("\npci2220i: sub 4")); - break; - } - - if ( pid->MinPIOCycleWithoutFlow <= 120 ) // setup timing mode of drive - minmode = 5; - else - { - if ( pid->MinPIOCylceWithFlow <= 150 ) - minmode = 4; - else - { - if ( pid->MinPIOCylceWithFlow <= 180 ) - minmode = 3; - else - { - if ( pid->MinPIOCylceWithFlow <= 240 ) - minmode = 2; - else - { - DEB (printk ("\npci2220i: sub 5")); - break; - } - } - } - } - - if ( padapter->timingMode > minmode ) // set minimum timing mode - padapter->timingMode = minmode; - if ( padapter->timingMode >= 2 ) - padapter->timingAddress = ModeArray[padapter->timingMode - 2]; - else - padapter->timingPIO = TRUE; - - padapter->reconOn = TRUE; - break; - } - - if ( !pdev->reconOn ) - { - padapter->survivor = pdev->mirrorRecon ^ 1; - padapter->reconPhase = RECON_PHASE_FAILOVER; - DEB (printk ("\npci2220i: FAILURE 7")); - InitFailover (padapter, pdev); - goto reconTimerExpiry; - } - - pdev->raid = TRUE; - - if ( WriteSignature (padapter, pdev, pdev->spigot, pdev->mirrorRecon ^ 1) ) - goto reconTimerExpiry; - padapter->reconPhase = RECON_PHASE_MARKING; - goto reconTimerExpiry; - } - - //********************************** - // reconstruct copy starts here - //********************************** - if ( pdev->reconCount++ > 2000 ) - { - pdev->reconCount = 0; - if ( WriteSignature (padapter, pdev, pdev->spigots[pdev->mirrorRecon], pdev->mirrorRecon) ) - { - padapter->survivor = pdev->mirrorRecon ^ 1; - padapter->reconPhase = RECON_PHASE_FAILOVER; - DEB (printk ("\npci2220i: FAILURE 8")); - InitFailover (padapter, pdev); - goto reconTimerExpiry; - } - padapter->reconPhase = RECON_PHASE_UPDATE; - goto reconTimerExpiry; - } - - zl = pdev->DiskMirror[pdev->mirrorRecon].reconstructPoint; - padapter->reconSize = pdev->DiskMirror[pdev->mirrorRecon ^ 1].reconstructPoint - zl; - if ( padapter->reconSize > MAX_BUS_MASTER_BLOCKS ) - padapter->reconSize = MAX_BUS_MASTER_BLOCKS; - - if ( padapter->reconSize ) - { - SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]); // select the spigots - outb_p (pdev->byte6 | ((UCHAR *)(&zl))[3], padapter->regLba24); // select the drive - SelectSpigot (padapter, pdev->spigot); - if ( WaitReady (padapter) ) - goto reconTimerExpiry; - - SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]); - if ( WaitReady (padapter) ) - { - padapter->survivor = pdev->mirrorRecon ^ 1; - padapter->reconPhase = RECON_PHASE_FAILOVER; - DEB (printk ("\npci2220i: FAILURE 9")); - InitFailover (padapter, pdev); - goto reconTimerExpiry; - } - - SelectSpigot (padapter, pdev->spigots[0] | pdev->spigots[1]); - outb_p (padapter->reconSize & 0xFF, padapter->regSectCount); - outb_p (((UCHAR *)(&zl))[0], padapter->regLba0); - outb_p (((UCHAR *)(&zl))[1], padapter->regLba8); - outb_p (((UCHAR *)(&zl))[2], padapter->regLba16); - padapter->expectingIRQ = TRUE; - padapter->reconPhase = RECON_PHASE_READY; - SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]); - WriteCommand (padapter, WRITE_CMD); - StartTimer (padapter); - SelectSpigot (padapter, pdev->spigot); - WriteCommand (padapter, READ_CMD); - goto reconTimerExpiry; - } - - pdev->DiskMirror[pdev->mirrorRecon].status = UCBF_MIRRORED | UCBF_MATCHED; - pdev->DiskMirror[pdev->mirrorRecon ^ 1].status = UCBF_MIRRORED | UCBF_MATCHED; - if ( WriteSignature (padapter, pdev, pdev->spigot, pdev->mirrorRecon ^ 1) ) - goto reconTimerExpiry; - padapter->reconPhase = RECON_PHASE_LAST; - -reconTimerExpiry:; - /* - * Release the I/O spinlock and restore the original flags - * which will enable interrupts if and only if they were - * enabled on entry. - */ - spin_unlock_irqrestore(host->host_lock, flags); - } -/**************************************************************** - * Name: Irq_Handler :LOCAL - * - * Description: Interrupt handler. - * - * Parameters: irq - Hardware IRQ number. - * dev_id - - * regs - - * - * Returns: TRUE if drive is not ready in time. - * - ****************************************************************/ -static irqreturn_t Irq_Handler (int irq, void *dev_id, struct pt_regs *regs) - { - struct Scsi_Host *shost = NULL; // Pointer to host data block - PADAPTER2220I padapter; // Pointer to adapter control structure - POUR_DEVICE pdev; - Scsi_Cmnd *SCpnt; - UCHAR status; - UCHAR status1; - ATAPI_STATUS statusa; - ATAPI_REASON reasona; - ATAPI_ERROR errora; - int z; - ULONG zl; - unsigned long flags; - int handled = 0; - -// DEB (printk ("\npci2220i received interrupt\n")); - - for ( z = 0; z < NumAdapters; z++ ) // scan for interrupt to process - { - if ( PsiHost[z]->irq == (UCHAR)(irq & 0xFF) ) - { - if ( inw_p (HOSTDATA(PsiHost[z])->regIrqControl) & 0x8000 ) - { - shost = PsiHost[z]; - break; - } - } - } - - if ( !shost ) - { - DEB (printk ("\npci2220i: not my interrupt")); - goto out; - } - - handled = 1; - spin_lock_irqsave(shost->host_lock, flags); - padapter = HOSTDATA(shost); - pdev = padapter->pdev; - SCpnt = padapter->SCpnt; - outb_p (0x08, padapter->regDmaCmdStat); // cancel interrupt from DMA engine - - if ( padapter->atapi && SCpnt ) - { - *(char *)&statusa = inb_p (padapter->regStatCmd); // read the device status - *(char *)&reasona = inb_p (padapter->regSectCount); // read the device interrupt reason - - if ( !statusa.bsy ) - { - if ( statusa.drq ) // test for transfer phase - { - if ( !reasona.cod ) // test for data phase - { - z = (ULONG)inb_p (padapter->regLba8) | (ULONG)(inb_p (padapter->regLba16) << 8); - if ( padapter->reqSense ) - insw (padapter->regData, SCpnt->sense_buffer, z / 2); - else - AtapiBusMaster (padapter, reasona.io, z); - goto irq_return; - } - if ( reasona.cod && !reasona.io ) // test for command packet phase - { - if ( padapter->reqSense ) - AtapiRequestSense (padapter, pdev, SCpnt, TRUE); - else - AtapiSendCdb (padapter, pdev, padapter->atapiCdb); - goto irq_return; - } - } - else - { - if ( reasona.io && statusa.drdy ) // test for status phase - { - Atapi2Scsi (padapter, SCpnt); - if ( statusa.check ) - { - *(UCHAR *)&errora = inb_p (padapter->regError); // read the device error - if ( errora.senseKey ) - { - if ( padapter->reqSense || AtapiRequestSense (padapter, pdev, SCpnt, FALSE) ) - OpDone (padapter, DID_ERROR << 16); - } - else - { - if ( errora.ili || errora.abort ) - OpDone (padapter, DID_ERROR << 16); - else - OpDone (padapter, DID_OK << 16); - } - } - else - if ( padapter->reqSense ) - { - DEB (printk ("PCI2242I: Sense codes - %X %X %X ", ((UCHAR *)SCpnt->sense_buffer)[0], ((UCHAR *)SCpnt->sense_buffer)[12], ((UCHAR *)SCpnt->sense_buffer)[13])); - OpDone (padapter, (DRIVER_SENSE << 24) | (DID_OK << 16) | 2); - } - else - OpDone (padapter, DID_OK << 16); - } - } - } - goto irq_return; - } - - if ( !padapter->expectingIRQ || !(SCpnt || padapter->reconPhase) ) - { - DEB(printk ("\npci2220i Unsolicited interrupt\n")); - STOP_HERE (); - goto irq_return; - } - padapter->expectingIRQ = 0; - - if ( padapter->failinprog ) - { - DEB (printk ("\npci2220i interrupt failover complete")); - padapter->failinprog = FALSE; - status = inb_p (padapter->regStatCmd); // read the device status - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - DEB (printk ("\npci2220i: interrupt failover error from drive %X", status)); - padapter->cmd = 0; - } - else - { - DEB (printk ("\npci2220i: restarting failed opertation.")); - pdev->spigot = (padapter->survivor) ? pdev->spigots[1] : pdev->spigots[0]; - del_timer (&padapter->timer); - if ( padapter->reconPhase ) - OpDone (padapter, DID_OK << 16); - else - Pci2220i_QueueCommand (SCpnt, SCpnt->scsi_done); - goto irq_return; - } - } - - if ( padapter->reconPhase ) - { - switch ( padapter->reconPhase ) - { - case RECON_PHASE_MARKING: - case RECON_PHASE_LAST: - status = inb_p (padapter->regStatCmd); // read the device status - del_timer (&padapter->timer); - if ( padapter->reconPhase == RECON_PHASE_LAST ) - { - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0; - DEB (printk ("\npci2220i: FAILURE 10")); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DecodeError (padapter, status)); - goto irq_return; - } - if ( WriteSignature (padapter, pdev, pdev->spigots[pdev->mirrorRecon], pdev->mirrorRecon) ) - { - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 11")); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DecodeError (padapter, status)); - goto irq_return; - } - padapter->reconPhase = RECON_PHASE_END; - goto irq_return; - } - OpDone (padapter, DID_OK << 16); - goto irq_return; - - case RECON_PHASE_READY: - status = inb_p (padapter->regStatCmd); // read the device status - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - del_timer (&padapter->timer); - OpDone (padapter, DecodeError (padapter, status)); - goto irq_return; - } - SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon]); - if ( WaitDrq (padapter) ) - { - del_timer (&padapter->timer); - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 12")); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DecodeError (padapter, status)); - goto irq_return; - } - SelectSpigot (padapter, pdev->spigot | SEL_COPY | padapter->bigD); - padapter->reconPhase = RECON_PHASE_COPY; - padapter->expectingIRQ = TRUE; - if ( padapter->timingPIO ) - { - insw (padapter->regData, padapter->kBuffer, padapter->reconSize * (BYTES_PER_SECTOR / 2)); - } - else - { - if ( (padapter->timingMode > 3) ) - { - if ( padapter->bigD ) - outl (BIGD_DATA_MODE3, padapter->regDmaAddrLoc); - else - outl (DALE_DATA_MODE3, padapter->regDmaAddrLoc); - } - else - outl (padapter->timingAddress, padapter->regDmaAddrLoc); - outl (padapter->kBufferDma, padapter->regDmaAddrPci); - outl (padapter->reconSize * BYTES_PER_SECTOR, padapter->regDmaCount); - outb_p (8, padapter->regDmaDesc); // read operation - if ( padapter->bigD ) - outb_p (8, padapter->regDmaMode); // no interrupt - else - outb_p (1, padapter->regDmaMode); // no interrupt - outb_p (0x03, padapter->regDmaCmdStat); // kick the DMA engine in gear - } - goto irq_return; - - case RECON_PHASE_COPY: - pdev->DiskMirror[pdev->mirrorRecon].reconstructPoint += padapter->reconSize; - - case RECON_PHASE_UPDATE: - SelectSpigot (padapter, pdev->spigots[pdev->mirrorRecon] | SEL_IRQ_OFF); - status = inb_p (padapter->regStatCmd); // read the device status - del_timer (&padapter->timer); - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 13")); - DEB (printk ("\n status register = %X error = %X", status, inb_p (padapter->regError))); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DecodeError (padapter, status)); - goto irq_return; - } - OpDone (padapter, DID_OK << 16); - goto irq_return; - - case RECON_PHASE_END: - status = inb_p (padapter->regStatCmd); // read the device status - del_timer (&padapter->timer); - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 0 : 1; - DEB (printk ("\npci2220i: FAILURE 14")); - if ( InitFailover (padapter, pdev) ) - OpDone (padapter, DecodeError (padapter, status)); - goto irq_return; - } - pdev->reconOn = 0; - if ( padapter->bigD ) - { - for ( z = 0; z < padapter->numberOfDrives; z++ ) - { - if ( padapter->device[z].DiskMirror[0].status & UCBF_SURVIVOR ) - { - Alarm (padapter, padapter->device[z].deviceID[0] ^ 2); - MuteAlarm (padapter); - } - if ( padapter->device[z].DiskMirror[1].status & UCBF_SURVIVOR ) - { - Alarm (padapter, padapter->device[z].deviceID[1] ^ 2); - MuteAlarm (padapter); - } - } - } - OpDone (padapter, DID_OK << 16); - goto irq_return; - - default: - goto irq_return; - } - } - - switch ( padapter->cmd ) // decide how to handle the interrupt - { - case READ_CMD: - if ( padapter->sectorCount ) - { - status = inb_p (padapter->regStatCmd); // read the device status - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - if ( pdev->raid ) - { - padapter->survivor = ( pdev->spigot == pdev->spigots[0] ) ? 1 : 0; - del_timer (&padapter->timer); - DEB (printk ("\npci2220i: FAILURE 15")); - if ( !InitFailover (padapter, pdev) ) - goto irq_return; - } - break; - } - if ( padapter->timingPIO ) - { - insw (padapter->regData, padapter->kBuffer, padapter->readCount / 2); - padapter->sectorCount -= padapter->readCount / BYTES_PER_SECTOR; - WalkScatGath (padapter, TRUE, padapter->readCount); - if ( !padapter->sectorCount ) - { - status = 0; - break; - } - } - else - { - if ( padapter->readCount ) - WalkScatGath (padapter, TRUE, padapter->readCount); - BusMaster (padapter, 1, 1); - } - padapter->expectingIRQ = TRUE; - goto irq_return; - } - if ( padapter->readCount && !padapter->timingPIO ) - WalkScatGath (padapter, TRUE, padapter->readCount); - status = 0; - break; - - case WRITE_CMD: - if ( pdev->raid ) - { - SelectSpigot (padapter, pdev->spigots[0] | SEL_IRQ_OFF); - status = inb_p (padapter->regStatCmd); // read the device status - SelectSpigot (padapter, pdev->spigots[1] | SEL_IRQ_OFF); - status1 = inb_p (padapter->regStatCmd); // read the device status - } - else - SelectSpigot (padapter, pdev->spigot | SEL_IRQ_OFF); - status = inb_p (padapter->regStatCmd); // read the device status - status1 = 0; - - if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - if ( pdev->raid && !(status1 & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT)) ) - { - padapter->survivor = 1; - del_timer (&padapter->timer); - SelectSpigot (padapter, pdev->spigot | SEL_IRQ_OFF); - DEB (printk ("\npci2220i: FAILURE 16 status = %X error = %X", status, inb_p (padapter->regError))); - if ( !InitFailover (padapter, pdev) ) - goto irq_return; - } - break; - } - if ( pdev->raid ) - { - if ( status1 & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) ) - { - padapter->survivor = 0; - del_timer (&padapter->timer); - DEB (printk ("\npci2220i: FAILURE 17 status = %X error = %X", status1, inb_p (padapter->regError))); - if ( !InitFailover (padapter, pdev) ) - goto irq_return; - status = status1; - break; - } - if ( padapter->sectorCount ) - { - status = WriteDataBoth (padapter, pdev); - if ( status ) - { - padapter->survivor = status >> 1; - del_timer (&padapter->timer); - DEB (printk ("\npci2220i: FAILURE 18")); - if ( !InitFailover (padapter, pdev) ) - goto irq_return; - SelectSpigot (padapter, pdev->spigots[status] | SEL_IRQ_OFF); - status = inb_p (padapter->regStatCmd); // read the device status - break; - } - padapter->expectingIRQ = TRUE; - goto irq_return; - } - status = 0; - break; - } - if ( padapter->sectorCount ) - { - SelectSpigot (padapter, pdev->spigot | padapter->bigD); - status = WriteData (padapter); - if ( status ) - break; - padapter->expectingIRQ = TRUE; - goto irq_return; - } - status = 0; - break; - - case IDE_COMMAND_IDENTIFY: - { - PINQUIRYDATA pinquiryData = SCpnt->request_buffer; - PIDENTIFY_DATA pid = (PIDENTIFY_DATA)padapter->kBuffer; - - status = inb_p (padapter->regStatCmd); - if ( status & IDE_STATUS_DRQ ) - { - insw (padapter->regData, pid, sizeof (IDENTIFY_DATA) >> 1); - - memset (pinquiryData, 0, SCpnt->request_bufflen); // Zero INQUIRY data structure. - pinquiryData->DeviceType = 0; - pinquiryData->Versions = 2; - pinquiryData->AdditionalLength = 35 - 4; - - // Fill in vendor identification fields. - for ( z = 0; z < 20; z += 2 ) - { - pinquiryData->VendorId[z] = ((UCHAR *)pid->ModelNumber)[z + 1]; - pinquiryData->VendorId[z + 1] = ((UCHAR *)pid->ModelNumber)[z]; - } - - // Initialize unused portion of product id. - for ( z = 0; z < 4; z++ ) - pinquiryData->ProductId[12 + z] = ' '; - - // Move firmware revision from IDENTIFY data to - // product revision in INQUIRY data. - for ( z = 0; z < 4; z += 2 ) - { - pinquiryData->ProductRevisionLevel[z] = ((UCHAR *)pid->FirmwareRevision)[z + 1]; - pinquiryData->ProductRevisionLevel[z + 1] = ((UCHAR *)pid->FirmwareRevision)[z]; - } - if ( pdev == padapter->device ) - *((USHORT *)(&pinquiryData->VendorSpecific)) = DEVICE_DALE_1; - - status = 0; - } - break; - } - - default: - status = 0; - break; - } - - del_timer (&padapter->timer); - if ( status ) - { - DEB (printk ("\npci2220i Interrupt handler return error")); - zl = DecodeError (padapter, status); - } - else - zl = DID_OK << 16; - - OpDone (padapter, zl); -irq_return: - spin_unlock_irqrestore(shost->host_lock, flags); -out: - return IRQ_RETVAL(handled); -} - -/**************************************************************** - * Name: Pci2220i_QueueCommand - * - * Description: Process a queued command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * done - Pointer to done function to call. - * - * Returns: Status code. - * - ****************************************************************/ -int Pci2220i_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)) - { - UCHAR *cdb = (UCHAR *)SCpnt->cmnd; // Pointer to SCSI CDB - PADAPTER2220I padapter = HOSTDATA(SCpnt->device->host); // Pointer to adapter control structure - POUR_DEVICE pdev = &padapter->device[SCpnt->device->id];// Pointer to device information - UCHAR rc; // command return code - int z; - PDEVICE_RAID1 pdr; - - SCpnt->scsi_done = done; - padapter->SCpnt = SCpnt; // Save this command data - padapter->readCount = 0; - - if ( SCpnt->use_sg ) - { - padapter->currentSgBuffer = ((struct scatterlist *)SCpnt->request_buffer)[0].address; - padapter->currentSgCount = ((struct scatterlist *)SCpnt->request_buffer)[0].length; - } - else - { - padapter->currentSgBuffer = SCpnt->request_buffer; - padapter->currentSgCount = SCpnt->request_bufflen; - } - padapter->nextSg = 1; - - if ( !done ) - { - printk("pci2220i_queuecommand: %02X: done can't be NULL\n", *cdb); - return 0; - } - - if ( padapter->atapi ) - { - UCHAR zlo, zhi; - - DEB (printk ("\nPCI2242I: ID %d, LUN %d opcode %X ", SCpnt->device->id, SCpnt->device->lun, *cdb)); - padapter->pdev = pdev; - if ( !pdev->byte6 || SCpnt->device->lun ) - { - OpDone (padapter, DID_BAD_TARGET << 16); - return 0; - } - - padapter->atapiSpecial = FALSE; - padapter->reqSense = FALSE; - memset (padapter->atapiCdb, 0, 16); - SelectSpigot (padapter, pdev->spigot); // select the spigot - AtapiDevice (padapter, pdev->byte6); // select the drive - if ( AtapiWaitReady (padapter, 100) ) - { - OpDone (padapter, DID_NO_CONNECT << 16); - return 0; - } - - switch ( cdb[0] ) - { - case SCSIOP_MODE_SENSE: - case SCSIOP_MODE_SELECT: - Scsi2Atapi (padapter, SCpnt); - z = SCpnt->request_bufflen + 4; - break; - case SCSIOP_READ6: - case SCSIOP_WRITE6: - Scsi2Atapi (padapter, SCpnt); - z = SCpnt->request_bufflen; - break; - default: - memcpy (padapter->atapiCdb, cdb, SCpnt->cmd_len); - z = SCpnt->request_bufflen; - break; - } - if ( z > ATAPI_TRANSFER ) - z = ATAPI_TRANSFER; - zlo = (UCHAR)(z & 0xFF); - zhi = (UCHAR)(z >> 8); - - AtapiCountLo (padapter, zlo); - AtapiCountHi (padapter, zhi); - outb_p (0, padapter->regError); - WriteCommand (padapter, IDE_COMMAND_ATAPI_PACKET); - if ( pdev->cmdDrqInt ) - return 0; - - if ( AtapiWaitDrq (padapter, 500) ) - { - OpDone (padapter, DID_ERROR << 16); - return 0; - } - AtapiSendCdb (padapter, pdev, padapter->atapiCdb); - return 0; - } - - if ( padapter->reconPhase ) - return 0; - if ( padapter->reconTimer.data ) - { - del_timer (&padapter->reconTimer); - padapter->reconTimer.data = 0; - } - - if ( (SCpnt->device->id >= padapter->numberOfDrives) || SCpnt->device->lun ) - { - OpDone (padapter, DID_BAD_TARGET << 16); - return 0; - } - - switch ( *cdb ) - { - case SCSIOP_INQUIRY: // inquiry CDB - { - if ( cdb[2] == SC_MY_RAID ) - { - switch ( cdb[3] ) - { - case MY_SCSI_REBUILD: - for ( z = 0; z < padapter->numberOfDrives; z++ ) - { - pdev = &padapter->device[z]; - if ( ((pdev->DiskMirror[0].status & UCBF_SURVIVOR) && (pdev->DiskMirror[1].status & UCBF_MIRRORED)) || - ((pdev->DiskMirror[1].status & UCBF_SURVIVOR) && (pdev->DiskMirror[0].status & UCBF_MIRRORED)) ) - { - padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE; - } - } - OpDone (padapter, DID_OK << 16); - break; - case MY_SCSI_ALARMMUTE: - MuteAlarm (padapter); - OpDone (padapter, DID_OK << 16); - break; - case MY_SCSI_DEMOFAIL: - padapter->demoFail = TRUE; - OpDone (padapter, DID_OK << 16); - break; - default: - z = cdb[5]; // get index - pdr = (PDEVICE_RAID1)SCpnt->request_buffer; - if ( padapter->raidData[z] ) - { - memcpy (&pdr->DiskRaid1, padapter->raidData[z], sizeof (DISK_MIRROR)); - if ( padapter->raidData[z]->reconstructPoint > padapter->raidData[z ^ 2]->reconstructPoint ) - pdr->TotalSectors = padapter->raidData[z]->reconstructPoint; - else - pdr->TotalSectors = padapter->raidData[z ^ 2]->reconstructPoint; - } - else - memset (pdr, 0, sizeof (DEVICE_RAID1)); - OpDone (padapter, DID_OK << 16); - break; - } - return 0; - } - padapter->cmd = IDE_COMMAND_IDENTIFY; - break; - } - - case SCSIOP_TEST_UNIT_READY: // test unit ready CDB - OpDone (padapter, DID_OK << 16); - return 0; - case SCSIOP_READ_CAPACITY: // read capctiy CDB - { - PREAD_CAPACITY_DATA pdata = (PREAD_CAPACITY_DATA)SCpnt->request_buffer; - - pdata->blksiz = 0x20000; - XANY2SCSI ((UCHAR *)&pdata->blks, pdev->blocks); - OpDone (padapter, DID_OK << 16); - return 0; - } - case SCSIOP_VERIFY: // verify CDB - padapter->startSector = XSCSI2LONG (&cdb[2]); - padapter->sectorCount = (UCHAR)((USHORT)cdb[8] | ((USHORT)cdb[7] << 8)); - padapter->cmd = IDE_COMMAND_VERIFY; - break; - case SCSIOP_READ: // read10 CDB - padapter->startSector = XSCSI2LONG (&cdb[2]); - padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8); - padapter->cmd = READ_CMD; - break; - case SCSIOP_READ6: // read6 CDB - padapter->startSector = SCSI2LONG (&cdb[1]); - padapter->sectorCount = cdb[4]; - padapter->cmd = READ_CMD; - break; - case SCSIOP_WRITE: // write10 CDB - padapter->startSector = XSCSI2LONG (&cdb[2]); - padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8); - padapter->cmd = WRITE_CMD; - break; - case SCSIOP_WRITE6: // write6 CDB - padapter->startSector = SCSI2LONG (&cdb[1]); - padapter->sectorCount = cdb[4]; - padapter->cmd = WRITE_CMD; - break; - default: - DEB (printk ("pci2220i_queuecommand: Unsupported command %02X\n", *cdb)); - OpDone (padapter, DID_ERROR << 16); - return 0; - } - - if ( padapter->reconPhase ) - return 0; - - padapter->pdev = pdev; - - while ( padapter->demoFail ) - { - pdev = padapter->pdev = &padapter->device[0]; - padapter->demoFail = FALSE; - if ( !pdev->raid || - (pdev->DiskMirror[0].status & UCBF_SURVIVOR) || - (pdev->DiskMirror[1].status & UCBF_SURVIVOR) ) - { - break; - } - if ( pdev->DiskMirror[0].status & UCBF_REBUILD ) - padapter->survivor = 1; - else - padapter->survivor = 0; - DEB (printk ("\npci2220i: FAILURE 19")); - if ( InitFailover (padapter, pdev) ) - break; - return 0; - } - - StartTimer (padapter); - if ( pdev->raid && (padapter->cmd == WRITE_CMD) ) - { - rc = IdeCmdBoth (padapter, pdev); - if ( !rc ) - rc = WriteDataBoth (padapter, pdev); - if ( rc ) - { - del_timer (&padapter->timer); - padapter->expectingIRQ = 0; - padapter->survivor = rc >> 1; - DEB (printk ("\npci2220i: FAILURE 20")); - if ( InitFailover (padapter, pdev) ) - { - OpDone (padapter, DID_ERROR << 16); - return 0; - } - } - } - else - { - rc = IdeCmd (padapter, pdev); - if ( (padapter->cmd == WRITE_CMD) && !rc ) - rc = WriteData (padapter); - if ( rc ) - { - del_timer (&padapter->timer); - padapter->expectingIRQ = 0; - if ( pdev->raid ) - { - padapter->survivor = (pdev->spigot ^ 3) >> 1; - DEB (printk ("\npci2220i: FAILURE 21")); - if ( !InitFailover (padapter, pdev) ) - return 0; - } - OpDone (padapter, DID_ERROR << 16); - return 0; - } - } - return 0; - } -/**************************************************************** - * Name: ReadFlash - * - * Description: Read information from controller Flash memory. - * - * Parameters: padapter - Pointer to host interface data structure. - * pdata - Pointer to data structures. - * base - base address in Flash. - * length - lenght of data space in bytes. - * - * Returns: Nothing. - * - ****************************************************************/ -static VOID ReadFlash (PADAPTER2220I padapter, VOID *pdata, ULONG base, ULONG length) - { - ULONG oldremap; - UCHAR olddesc; - ULONG z; - UCHAR *pd = (UCHAR *)pdata; - - oldremap = inl (padapter->regRemap); // save values to restore later - olddesc = inb_p (padapter->regDesc); - - outl (base | 1, padapter->regRemap); // remap to Flash space as specified - outb_p (0x40, padapter->regDesc); // describe remap region as 8 bit - for ( z = 0; z < length; z++) // get "length" data count - *pd++ = inb_p (padapter->regBase + z); // read in the data - - outl (oldremap, padapter->regRemap); // restore remap register values - outb_p (olddesc, padapter->regDesc); - } -/**************************************************************** - * Name: GetRegs - * - * Description: Initialize the regester information. - * - * Parameters: pshost - Pointer to SCSI host data structure. - * bigd - PCI-2240I identifier - * pcidev - Pointer to device data structure. - * - * Returns: TRUE if failure to install. - * - ****************************************************************/ -static USHORT GetRegs (struct Scsi_Host *pshost, BOOL bigd, struct pci_dev *pcidev) - { - PADAPTER2220I padapter; - int setirq; - int z; - USHORT zr, zl; - UCHAR *consistent; - dma_addr_t consistentDma; - - padapter = HOSTDATA(pshost); - memset (padapter, 0, sizeof (ADAPTER2220I)); - memset (&DaleSetup, 0, sizeof (DaleSetup)); - memset (DiskMirror, 0, sizeof (DiskMirror)); - - zr = pci_resource_start (pcidev, 1); - zl = pci_resource_start (pcidev, 2); - - padapter->basePort = zr; - padapter->regRemap = zr + RTR_LOCAL_REMAP; // 32 bit local space remap - padapter->regDesc = zr + RTR_REGIONS; // 32 bit local region descriptor - padapter->regRange = zr + RTR_LOCAL_RANGE; // 32 bit local range - padapter->regIrqControl = zr + RTR_INT_CONTROL_STATUS; // 16 bit interrupt control and status - padapter->regScratchPad = zr + RTR_MAILBOX; // 16 byte scratchpad I/O base address - - padapter->regBase = zl; - padapter->regData = zl + REG_DATA; // data register I/O address - padapter->regError = zl + REG_ERROR; // error register I/O address - padapter->regSectCount = zl + REG_SECTOR_COUNT; // sector count register I/O address - padapter->regLba0 = zl + REG_LBA_0; // least significant byte of LBA - padapter->regLba8 = zl + REG_LBA_8; // next least significant byte of LBA - padapter->regLba16 = zl + REG_LBA_16; // next most significan byte of LBA - padapter->regLba24 = zl + REG_LBA_24; // head and most 4 significant bits of LBA - padapter->regStatCmd = zl + REG_STAT_CMD; // status on read and command on write register - padapter->regStatSel = zl + REG_STAT_SEL; // board status on read and spigot select on write register - padapter->regFail = zl + REG_FAIL; - padapter->regAltStat = zl + REG_ALT_STAT; - padapter->pcidev = pcidev; - - if ( bigd ) - { - padapter->regDmaDesc = zr + RTR_DMA0_DESC_PTR; // address of the DMA discriptor register for direction of transfer - padapter->regDmaCmdStat = zr + RTR_DMA_COMMAND_STATUS; // Byte #0 of DMA command status register - padapter->regDmaAddrPci = zr + RTR_DMA0_PCI_ADDR; // 32 bit register for PCI address of DMA - padapter->regDmaAddrLoc = zr + RTR_DMA0_LOCAL_ADDR; // 32 bit register for local bus address of DMA - padapter->regDmaCount = zr + RTR_DMA0_COUNT; // 32 bit register for DMA transfer count - padapter->regDmaMode = zr + RTR_DMA0_MODE + 1; // 32 bit register for DMA mode control - padapter->bigD = SEL_NEW_SPEED_1; // set spigot speed control bit - } - else - { - padapter->regDmaDesc = zl + RTL_DMA1_DESC_PTR; // address of the DMA discriptor register for direction of transfer - padapter->regDmaCmdStat = zl + RTL_DMA_COMMAND_STATUS + 1; // Byte #1 of DMA command status register - padapter->regDmaAddrPci = zl + RTL_DMA1_PCI_ADDR; // 32 bit register for PCI address of DMA - padapter->regDmaAddrLoc = zl + RTL_DMA1_LOCAL_ADDR; // 32 bit register for local bus address of DMA - padapter->regDmaCount = zl + RTL_DMA1_COUNT; // 32 bit register for DMA transfer count - padapter->regDmaMode = zl + RTL_DMA1_MODE + 1; // 32 bit register for DMA mode control - } - - padapter->numberOfDrives = inb_p (padapter->regScratchPad + BIGD_NUM_DRIVES); - if ( !bigd && !padapter->numberOfDrives ) // if no devices on this board - return TRUE; - - pshost->irq = pcidev->irq; - setirq = 1; - for ( z = 0; z < Installed; z++ ) // scan for shared interrupts - { - if ( PsiHost[z]->irq == pshost->irq ) // if shared then, don't posses - setirq = 0; - } - if ( setirq ) // if not shared, posses - { - if ( request_irq (pshost->irq, Irq_Handler, SA_SHIRQ, "pci2220i", padapter) < 0 ) - { - if ( request_irq (pshost->irq, Irq_Handler, SA_INTERRUPT | SA_SHIRQ, "pci2220i", padapter) < 0 ) - { - printk ("Unable to allocate IRQ for PCI-2220I controller.\n"); - return TRUE; - } - } - padapter->irqOwned = pshost->irq; // set IRQ as owned - } - - if ( padapter->numberOfDrives ) - consistent = pci_alloc_consistent (pcidev, SECTORSXFER * BYTES_PER_SECTOR, &consistentDma); - else - consistent = pci_alloc_consistent (pcidev, ATAPI_TRANSFER, &consistentDma); - if ( !consistent ) - { - printk ("Unable to allocate DMA buffer for PCI-2220I controller.\n"); - free_irq (pshost->irq, padapter); - return TRUE; - } - padapter->kBuffer = consistent; - padapter->kBufferDma = consistentDma; - - PsiHost[Installed] = pshost; // save SCSI_HOST pointer - pshost->io_port = padapter->basePort; - pshost->n_io_port = 0xFF; - pshost->unique_id = padapter->regBase; - - outb_p (0x01, padapter->regRange); // fix our range register because other drivers want to tromp on it - - padapter->timingMode = inb_p (padapter->regScratchPad + DALE_TIMING_MODE); - if ( padapter->timingMode >= 2 ) - { - if ( bigd ) - padapter->timingAddress = ModeArray2[padapter->timingMode - 2]; - else - padapter->timingAddress = ModeArray[padapter->timingMode - 2]; - } - else - padapter->timingPIO = TRUE; - - ReadFlash (padapter, &DaleSetup, DALE_FLASH_SETUP, sizeof (SETUP)); - ReadFlash (padapter, &DiskMirror, DALE_FLASH_RAID, sizeof (DiskMirror)); - - return FALSE; - } -/**************************************************************** - * Name: SetupFinish - * - * Description: Complete the driver initialization process for a card - * - * Parameters: padapter - Pointer to SCSI host data structure. - * str - Pointer to board type string. - * - * Returns: Nothing. - * - ****************************************************************/ -VOID SetupFinish (PADAPTER2220I padapter, char *str, int irq) - { - init_timer (&padapter->timer); - padapter->timer.function = TimerExpiry; - padapter->timer.data = (unsigned long)padapter; - init_timer (&padapter->reconTimer); - padapter->reconTimer.function = ReconTimerExpiry; - padapter->reconTimer.data = (unsigned long)padapter; - printk("\nPCI-%sI EIDE CONTROLLER: at I/O = %lX/%lX IRQ = %d\n", str, padapter->basePort, padapter->regBase, irq); - printk("Version %s, Compiled %s %s\n\n", PCI2220I_VERSION, __DATE__, __TIME__); - } -/**************************************************************** - * Name: Pci2220i_Detect - * - * Description: Detect and initialize our boards. - * - * Parameters: tpnt - Pointer to SCSI host template structure. - * - * Returns: Number of adapters installed. - * - ****************************************************************/ -int Pci2220i_Detect (Scsi_Host_Template *tpnt) - { - struct Scsi_Host *pshost; - PADAPTER2220I padapter; - POUR_DEVICE pdev; - int unit; - int z; - USHORT raidon; - UCHAR spigot1, spigot2; - UCHAR device; - struct pci_dev *pcidev = NULL; - - while ( (pcidev = pci_find_device (VENDOR_PSI, DEVICE_DALE_1, pcidev)) != NULL ) - { - if (pci_enable_device(pcidev)) - continue; - pshost = scsi_register (tpnt, sizeof(ADAPTER2220I)); - if(pshost==NULL) - continue; - - padapter = HOSTDATA(pshost); - - if ( GetRegs (pshost, FALSE, pcidev) ) - goto unregister; - - scsi_set_device(pshost, &pcidev->dev); - pshost->max_id = padapter->numberOfDrives; - for ( z = 0; z < padapter->numberOfDrives; z++ ) - { - unit = inb_p (padapter->regScratchPad + DALE_CHANNEL_DEVICE_0 + z) & 0x0F; - pdev = &padapter->device[z]; - pdev->byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0); - pdev->spigot = (UCHAR)(1 << (unit >> 1)); - pdev->sectors = DaleSetup.setupDevice[unit].sectors; - pdev->heads = DaleSetup.setupDevice[unit].heads; - pdev->cylinders = DaleSetup.setupDevice[unit].cylinders; - pdev->blocks = DaleSetup.setupDevice[unit].blocks; - - if ( !z ) - { - DiskMirror[0].status = inb_p (padapter->regScratchPad + DALE_RAID_0_STATUS); - DiskMirror[1].status = inb_p (padapter->regScratchPad + DALE_RAID_1_STATUS); - if ( (DiskMirror[0].signature == SIGNATURE) && (DiskMirror[1].signature == SIGNATURE) && - (DiskMirror[0].pairIdentifier == (DiskMirror[1].pairIdentifier ^ 1)) ) - { - raidon = TRUE; - if ( unit > (unit ^ 2) ) - unit = unit ^ 2; - } - else - raidon = FALSE; - - memcpy (pdev->DiskMirror, DiskMirror, sizeof (DiskMirror)); - padapter->raidData[0] = &pdev->DiskMirror[0]; - padapter->raidData[2] = &pdev->DiskMirror[1]; - - spigot1 = spigot2 = FALSE; - pdev->spigots[0] = 1; - pdev->spigots[1] = 2; - pdev->lastsectorlba[0] = InlineIdentify (padapter, 1, 0); - pdev->lastsectorlba[1] = InlineIdentify (padapter, 2, 0); - - if ( !(pdev->DiskMirror[1].status & UCBF_SURVIVOR) && pdev->lastsectorlba[0] ) - spigot1 = TRUE; - if ( !(pdev->DiskMirror[0].status & UCBF_SURVIVOR) && pdev->lastsectorlba[1] ) - spigot2 = TRUE; - if ( pdev->DiskMirror[0].status & DiskMirror[1].status & UCBF_SURVIVOR ) - spigot1 = TRUE; - - if ( spigot1 && (pdev->DiskMirror[0].status & UCBF_REBUILD) ) - InlineReadSignature (padapter, pdev, 0); - if ( spigot2 && (pdev->DiskMirror[1].status & UCBF_REBUILD) ) - InlineReadSignature (padapter, pdev, 1); - - if ( spigot1 && spigot2 && raidon ) - { - pdev->raid = 1; - if ( pdev->DiskMirror[0].status & UCBF_REBUILD ) - pdev->spigot = 2; - else - pdev->spigot = 1; - if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) ) - padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE; - } - else - { - if ( spigot1 ) - { - if ( pdev->DiskMirror[0].status & UCBF_REBUILD ) - goto unregister; - pdev->DiskMirror[0].status = UCBF_MIRRORED | UCBF_SURVIVOR; - pdev->spigot = 1; - } - else - { - if ( pdev->DiskMirror[1].status & UCBF_REBUILD ) - goto unregister; - pdev->DiskMirror[1].status = UCBF_MIRRORED | UCBF_SURVIVOR; - pdev->spigot = 2; - } - if ( DaleSetup.rebootRebuild && raidon ) - padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE; - } - - if ( raidon ) - break; - } - } - - SetupFinish (padapter, "2220", pshost->irq); - - if ( ++Installed < MAXADAPTER ) - continue; - break; -unregister:; - scsi_unregister (pshost); - } - - while ( (pcidev = pci_find_device (VENDOR_PSI, DEVICE_BIGD_1, pcidev)) != NULL ) - { - pshost = scsi_register (tpnt, sizeof(ADAPTER2220I)); - padapter = HOSTDATA(pshost); - - if ( GetRegs (pshost, TRUE, pcidev) ) - goto unregister1; - - for ( z = 0; z < BIGD_MAXDRIVES; z++ ) - DiskMirror[z].status = inb_p (padapter->regScratchPad + BIGD_RAID_0_STATUS + z); - - scsi_set_pci_device(pshost, pcidev); - pshost->max_id = padapter->numberOfDrives; - padapter->failRegister = inb_p (padapter->regScratchPad + BIGD_ALARM_IMAGE); - for ( z = 0; z < padapter->numberOfDrives; z++ ) - { - unit = inb_p (padapter->regScratchPad + BIGD_DEVICE_0 + z); - pdev = &padapter->device[z]; - pdev->byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0); - pdev->spigot = (UCHAR)(1 << (unit >> 1)); - pdev->sectors = DaleSetup.setupDevice[unit].sectors; - pdev->heads = DaleSetup.setupDevice[unit].heads; - pdev->cylinders = DaleSetup.setupDevice[unit].cylinders; - pdev->blocks = DaleSetup.setupDevice[unit].blocks; - - if ( (DiskMirror[unit].signature == SIGNATURE) && (DiskMirror[unit ^ 2].signature == SIGNATURE) && - (DiskMirror[unit].pairIdentifier == (DiskMirror[unit ^ 2].pairIdentifier ^ 1)) ) - { - raidon = TRUE; - if ( unit > (unit ^ 2) ) - unit = unit ^ 2; - } - else - raidon = FALSE; - - spigot1 = spigot2 = FALSE; - memcpy (&pdev->DiskMirror[0], &DiskMirror[unit], sizeof (DISK_MIRROR)); - memcpy (&pdev->DiskMirror[1], &DiskMirror[unit ^ 2], sizeof (DISK_MIRROR)); - padapter->raidData[unit] = &pdev->DiskMirror[0]; - padapter->raidData[unit ^ 2] = &pdev->DiskMirror[1]; - pdev->spigots[0] = 1 << (unit >> 1); - pdev->spigots[1] = 1 << ((unit ^ 2) >> 1); - pdev->deviceID[0] = unit; - pdev->deviceID[1] = unit ^ 2; - pdev->lastsectorlba[0] = InlineIdentify (padapter, pdev->spigots[0], unit & 1); - pdev->lastsectorlba[1] = InlineIdentify (padapter, pdev->spigots[1], unit & 1); - - if ( !(pdev->DiskMirror[1].status & UCBF_SURVIVOR) && pdev->lastsectorlba[0] ) - spigot1 = TRUE; - if ( !(pdev->DiskMirror[0].status & UCBF_SURVIVOR) && pdev->lastsectorlba[1] ) - spigot2 = TRUE; - if ( pdev->DiskMirror[0].status & pdev->DiskMirror[1].status & UCBF_SURVIVOR ) - spigot1 = TRUE; - - if ( spigot1 && (pdev->DiskMirror[0].status & UCBF_REBUILD) ) - InlineReadSignature (padapter, pdev, 0); - if ( spigot2 && (pdev->DiskMirror[1].status & UCBF_REBUILD) ) - InlineReadSignature (padapter, pdev, 1); - - if ( spigot1 && spigot2 && raidon ) - { - pdev->raid = 1; - if ( pdev->DiskMirror[0].status & UCBF_REBUILD ) - pdev->spigot = pdev->spigots[1]; - else - pdev->spigot = pdev->spigots[0]; - if ( (pdev->DiskMirror[0].status & UCBF_REBUILD) || (pdev->DiskMirror[1].status & UCBF_REBUILD) ) - padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE; - } - else - { - if ( spigot1 ) - { - if ( pdev->DiskMirror[0].status & UCBF_REBUILD ) - goto unregister1; - pdev->DiskMirror[0].status = UCBF_MIRRORED | UCBF_SURVIVOR; - pdev->spigot = pdev->spigots[0]; - } - else - { - if ( pdev->DiskMirror[1].status & UCBF_REBUILD ) - goto unregister; - pdev->DiskMirror[1].status = UCBF_MIRRORED | UCBF_SURVIVOR; - pdev->spigot = pdev->spigots[1]; - } - if ( DaleSetup.rebootRebuild && raidon ) - padapter->reconOn = pdev->reconOn = pdev->reconIsStarting = TRUE; - } - } - - if ( !padapter->numberOfDrives ) // If no ATA devices then scan ATAPI - { - unit = 0; - for ( spigot1 = 0; spigot1 < 4; spigot1++ ) - { - for ( device = 0; device < 2; device++ ) - { - DEB (printk ("\nPCI2242I: scanning for ID %d ", (spigot1 * 2) + device)); - pdev = &(padapter->device[(spigot1 * 2) + device]); - pdev->byte6 = 0x0A | (device << 4); - pdev->spigot = 1 << spigot1; - if ( !AtapiReset (padapter, pdev) ) - { - DEB (printk (" Device found ")); - if ( !AtapiIdentify (padapter, pdev) ) - { - DEB (printk (" Device verified")); - unit++; - continue; - } - } - pdev->spigot = pdev->byte6 = 0; - } - } - - if ( unit ) - { - padapter->atapi = TRUE; - padapter->timingAddress = DALE_DATA_MODE3; - outw_p (0x0900, padapter->regIrqControl); // Turn our interrupts on - outw_p (0x0C41, padapter->regDmaMode - 1); // setup for 16 bits, ready enabled, done IRQ enabled, no incriment - outb_p (0xFF, padapter->regFail); // all fail lights and alarm off - pshost->max_id = 8; - } - } - SetupFinish (padapter, "2240", pshost->irq); - - if ( ++Installed < MAXADAPTER ) - continue; - break; -unregister1:; - scsi_unregister (pshost); - } - - NumAdapters = Installed; - return Installed; - } -/**************************************************************** - * Name: Pci2220i_Abort - * - * Description: Process the Abort command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * - * Returns: Allways snooze. - * - ****************************************************************/ -int Pci2220i_Abort (Scsi_Cmnd *SCpnt) - { - PADAPTER2220I padapter = HOSTDATA(SCpnt->device->host); // Pointer to adapter control structure - POUR_DEVICE pdev = &padapter->device[SCpnt->device->id];// Pointer to device information - - if ( !padapter->SCpnt ) - return SCSI_ABORT_NOT_RUNNING; - - if ( padapter->atapi ) - { - if ( AtapiReset (padapter, pdev) ) - return SCSI_ABORT_ERROR; - OpDone (padapter, DID_ABORT << 16); - return SCSI_ABORT_SUCCESS; - } - return SCSI_ABORT_SNOOZE; - } -/**************************************************************** - * Name: Pci2220i_Reset - * - * Description: Process the Reset command from the SCSI manager. - * - * Parameters: SCpnt - Pointer to SCSI command structure. - * flags - Flags about the reset command - * - * Returns: No active command at this time, so this means - * that each time we got some kind of response the - * last time through. Tell the mid-level code to - * request sense information in order to decide what - * to do next. - * - ****************************************************************/ -int Pci2220i_Reset (Scsi_Cmnd *SCpnt, unsigned int reset_flags) - { - PADAPTER2220I padapter = HOSTDATA(SCpnt->device->host); // Pointer to adapter control structure - POUR_DEVICE pdev = &padapter->device[SCpnt->device->id];// Pointer to device information - - if ( padapter->atapi ) - { - if ( AtapiReset (padapter, pdev) ) - return SCSI_RESET_ERROR; - return SCSI_RESET_SUCCESS; - } - return SCSI_RESET_PUNT; - } -/**************************************************************** - * Name: Pci2220i_Release - * - * Description: Release resources allocated for a single each adapter. - * - * Parameters: pshost - Pointer to SCSI command structure. - * - * Returns: zero. - * - ****************************************************************/ -int Pci2220i_Release (struct Scsi_Host *pshost) - { - PADAPTER2220I padapter = HOSTDATA (pshost); - USHORT z; - - if ( padapter->reconOn ) - { - padapter->reconOn = FALSE; // shut down the hot reconstruct - if ( padapter->reconPhase ) - mdelay (300); - if ( padapter->reconTimer.data ) // is the timer running? - { - del_timer (&padapter->reconTimer); - padapter->reconTimer.data = 0; - } - } - - // save RAID status on the board - if ( padapter->bigD ) - { - outb_p (padapter->failRegister, padapter->regScratchPad + BIGD_ALARM_IMAGE); - for ( z = 0; z < BIGD_MAXDRIVES; z++ ) - { - if ( padapter->raidData ) - outb_p (padapter->raidData[z]->status, padapter->regScratchPad + BIGD_RAID_0_STATUS + z); - else - outb_p (0, padapter->regScratchPad + BIGD_RAID_0_STATUS); - } - } - else - { - outb_p (padapter->device[0].DiskMirror[0].status, padapter->regScratchPad + DALE_RAID_0_STATUS); - outb_p (padapter->device[0].DiskMirror[1].status, padapter->regScratchPad + DALE_RAID_1_STATUS); - } - - if ( padapter->irqOwned ) - free_irq (pshost->irq, padapter); - release_region (pshost->io_port, pshost->n_io_port); - if ( padapter->numberOfDrives ) - pci_free_consistent (padapter->pcidev, SECTORSXFER * BYTES_PER_SECTOR, padapter->kBuffer, padapter->kBufferDma); - else - pci_free_consistent (padapter->pcidev, ATAPI_TRANSFER, padapter->kBuffer, padapter->kBufferDma); - scsi_unregister(pshost); - return 0; - } - -/**************************************************************** - * Name: Pci2220i_BiosParam - * - * Description: Process the biosparam request from the SCSI manager to - * return C/H/S data. - * - * Parameters: disk - Pointer to SCSI disk structure. - * dev - Major/minor number from kernel. - * geom - Pointer to integer array to place geometry data. - * - * Returns: zero. - * - ****************************************************************/ -int Pci2220i_BiosParam (struct scsi_device *sdev, struct block_device *dev, - sector_t capacity, int geom[]) - { - POUR_DEVICE pdev; - - if ( !(HOSTDATA(sdev->host))->atapi ) - { - pdev = &(HOSTDATA(sdev->host)->device[sdev->id]); - - geom[0] = pdev->heads; - geom[1] = pdev->sectors; - geom[2] = pdev->cylinders; - } - return 0; - } - -MODULE_LICENSE("Dual BSD/GPL"); - -static Scsi_Host_Template driver_template = { - .proc_name = "pci2220i", - .name = "PCI-2220I/PCI-2240I", - .detect = Pci2220i_Detect, - .release = Pci2220i_Release, - .queuecommand = Pci2220i_QueueCommand, - .abort = Pci2220i_Abort, - .reset = Pci2220i_Reset, - .bios_param = Pci2220i_BiosParam, - .can_queue = 1, - .this_id = -1, - .sg_tablesize = SG_ALL, - .cmd_per_lun = 1, - .use_clustering = DISABLE_CLUSTERING, -}; -#include "scsi_module.c" diff --git a/drivers/scsi/pci2220i.h b/drivers/scsi/pci2220i.h deleted file mode 100644 index 6926056c2aee..000000000000 --- a/drivers/scsi/pci2220i.h +++ /dev/null @@ -1,39 +0,0 @@ -/**************************************************************************** - * Perceptive Solutions, Inc. PCI-2220I device driver for Linux. - * - * pci2220i.h - Linux Host Driver for PCI-2220i EIDE Adapters - * - * Copyright (c) 1997-1999 Perceptive Solutions, Inc. - * All Rights Reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that redistributions of source - * code retain the above copyright notice and this comment without - * modification. - * - * Technical updates and product information at: - * http://www.psidisk.com - * - * Please send questions, comments, bug reports to: - * tech@psidisk.com Technical Support - * - ****************************************************************************/ -#ifndef _PCI2220I_H -#define _PCI2220I_H - -#ifndef LINUX_VERSION_CODE -#include -#endif -#define LINUXVERSION(v,p,s) (((v)<<16) + ((p)<<8) + (s)) - -// function prototypes -int Pci2220i_Detect (Scsi_Host_Template *tpnt); -int Pci2220i_Command (Scsi_Cmnd *SCpnt); -int Pci2220i_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *)); -int Pci2220i_Abort (Scsi_Cmnd *SCpnt); -int Pci2220i_Reset (Scsi_Cmnd *SCpnt, unsigned int flags); -int Pci2220i_Release (struct Scsi_Host *pshost); -int Pci2220i_BiosParam (struct scsi_device *sdev, - struct block_device *dev, - sector_t capacity, int geom[]); -#endif diff --git a/drivers/scsi/psi_dale.h b/drivers/scsi/psi_dale.h deleted file mode 100644 index d672e3b01982..000000000000 --- a/drivers/scsi/psi_dale.h +++ /dev/null @@ -1,564 +0,0 @@ -/**************************************************************************** - * Perceptive Solutions, Inc. PCI-2220I device driver for Linux. - * - * psi_dalei.h - Linux Host Driver for PCI-2220i EIDE Adapters - * - * Copyright (c) 1997-1999 Perceptive Solutions, Inc. - * All Rights Reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that redistributions of source - * code retain the above copyright notice and this comment without - * modification. - * - * Technical updates and product information at: - * http://www.psidisk.com - * - * Please send questions, comments, bug reports to: - * tech@psidisk.com Technical Support - * - ****************************************************************************/ - -/************************************************/ -/* Some defines that we like */ -/************************************************/ -#define CHAR char -#define UCHAR unsigned char -#define SHORT short -#define USHORT unsigned short -#define BOOL unsigned short -#define LONG long -#define ULONG unsigned long -#define VOID void - -/************************************************/ -/* Dale PCI setup */ -/************************************************/ -#define VENDOR_PSI 0x1256 -#define DEVICE_DALE_1 0x4401 /* 'D1' */ -#define DEVICE_BIGD_1 0x4201 /* 'B1' */ -#define DEVICE_BIGD_2 0x4202 /* 'B2' */ - -/************************************************/ -/* Misc konstants */ -/************************************************/ -#define DALE_MAXDRIVES 4 -#define BIGD_MAXDRIVES 8 -#define SECTORSXFER 8 -#define ATAPI_TRANSFER 8192 -#define BYTES_PER_SECTOR 512 -#define DEFAULT_TIMING_MODE 5 - -/************************************************/ -/* EEPROM locations */ -/************************************************/ -#define DALE_FLASH_PAGE_SIZE 128 // number of bytes per page -#define DALE_FLASH_SIZE 65536L - -#define DALE_FLASH_BIOS 0x00080000L // BIOS base address -#define DALE_FLASH_SETUP 0x00088000L // SETUP PROGRAM base address offset from BIOS -#define DALE_FLASH_RAID 0x00088400L // RAID signature storage -#define DALE_FLASH_FACTORY 0x00089000L // FACTORY data base address offset from BIOS - -#define DALE_FLASH_BIOS_SIZE 32768U // size of FLASH BIOS REGION - -/************************************************/ -/* DALE Register address offsets */ -/************************************************/ -#define REG_DATA 0x80 -#define REG_ERROR 0x84 -#define REG_SECTOR_COUNT 0x88 -#define REG_LBA_0 0x8C -#define REG_LBA_8 0x90 -#define REG_LBA_16 0x94 -#define REG_LBA_24 0x98 -#define REG_STAT_CMD 0x9C -#define REG_STAT_SEL 0xA0 -#define REG_FAIL 0xB0 -#define REG_ALT_STAT 0xB8 -#define REG_DRIVE_ADRS 0xBC - -#define DALE_DATA_SLOW 0x00040000L -#define DALE_DATA_MODE2 0x00040000L -#define DALE_DATA_MODE3 0x00050000L -#define DALE_DATA_MODE4 0x00060000L -#define DALE_DATA_MODE5 0x00070000L - -#define BIGD_DATA_SLOW 0x00000000L -#define BIGD_DATA_MODE0 0x00000000L -#define BIGD_DATA_MODE2 0x00000000L -#define BIGD_DATA_MODE3 0x00000008L -#define BIGD_DATA_MODE4 0x00000010L -#define BIGD_DATA_MODE5 0x00000020L - -#define RTR_LOCAL_RANGE 0x000 -#define RTR_LOCAL_REMAP 0x004 -#define RTR_EXP_RANGE 0x010 -#define RTR_EXP_REMAP 0x014 -#define RTR_REGIONS 0x018 -#define RTR_DM_MASK 0x01C -#define RTR_DM_LOCAL_BASE 0x020 -#define RTR_DM_IO_BASE 0x024 -#define RTR_DM_PCI_REMAP 0x028 -#define RTR_DM_IO_CONFIG 0x02C -#define RTR_MAILBOX 0x040 -#define RTR_LOCAL_DOORBELL 0x060 -#define RTR_PCI_DOORBELL 0x064 -#define RTR_INT_CONTROL_STATUS 0x068 -#define RTR_EEPROM_CONTROL_STATUS 0x06C - -#define RTR_DMA0_MODE 0x0080 -#define RTR_DMA0_PCI_ADDR 0x0084 -#define RTR_DMA0_LOCAL_ADDR 0x0088 -#define RTR_DMA0_COUNT 0x008C -#define RTR_DMA0_DESC_PTR 0x0090 -#define RTR_DMA1_MODE 0x0094 -#define RTR_DMA1_PCI_ADDR 0x0098 -#define RTR_DMA1_LOCAL_ADDR 0x009C -#define RTR_DMA1_COUNT 0x00A0 -#define RTR_DMA1_DESC_PTR 0x00A4 -#define RTR_DMA_COMMAND_STATUS 0x00A8 -#define RTR_DMA_ARB0 0x00AC -#define RTR_DMA_ARB1 0x00B0 - -#define RTL_DMA0_MODE 0x00 -#define RTL_DMA0_PCI_ADDR 0x04 -#define RTL_DMA0_LOCAL_ADDR 0x08 -#define RTL_DMA0_COUNT 0x0C -#define RTL_DMA0_DESC_PTR 0x10 -#define RTL_DMA1_MODE 0x14 -#define RTL_DMA1_PCI_ADDR 0x18 -#define RTL_DMA1_LOCAL_ADDR 0x1C -#define RTL_DMA1_COUNT 0x20 -#define RTL_DMA1_DESC_PTR 0x24 -#define RTL_DMA_COMMAND_STATUS 0x28 -#define RTL_DMA_ARB0 0x2C -#define RTL_DMA_ARB1 0x30 - -/************************************************/ -/* Dale Scratchpad locations */ -/************************************************/ -#define DALE_CHANNEL_DEVICE_0 0 // device channel locations -#define DALE_CHANNEL_DEVICE_1 1 -#define DALE_CHANNEL_DEVICE_2 2 -#define DALE_CHANNEL_DEVICE_3 3 - -#define DALE_SCRATCH_DEVICE_0 4 // device type codes -#define DALE_SCRATCH_DEVICE_1 5 -#define DALE_SCRATCH_DEVICE_2 6 -#define DALE_SCRATCH_DEVICE_3 7 - -#define DALE_RAID_0_STATUS 8 -#define DALE_RAID_1_STATUS 9 - -#define DALE_TIMING_MODE 12 // bus master timing mode (2, 3, 4, 5) -#define DALE_NUM_DRIVES 13 // number of addressable drives on this board -#define DALE_RAID_ON 14 // RAID status On -#define DALE_LAST_ERROR 15 // Last error code from BIOS - -/************************************************/ -/* BigD Scratchpad locations */ -/************************************************/ -#define BIGD_DEVICE_0 0 // device channel locations -#define BIGD_DEVICE_1 1 -#define BIGD_DEVICE_2 2 -#define BIGD_DEVICE_3 3 - -#define BIGD_DEVICE_4 4 // device type codes -#define BIGD_DEVICE_5 5 -#define BIGD_DEVICE_6 6 -#define BIGD_DEVICE_7 7 - -#define BIGD_ALARM_IMAGE 11 // ~image of alarm fail register -#define BIGD_TIMING_MODE 12 // bus master timing mode (2, 3, 4, 5) -#define BIGD_NUM_DRIVES 13 // number of addressable drives on this board -#define BIGD_RAID_ON 14 // RAID status is on for the whole board -#define BIGD_LAST_ERROR 15 // Last error code from BIOS - -#define BIGD_RAID_0_STATUS 16 -#define BIGD_RAID_1_STATUS 17 -#define BIGD_RAID_2_STATUS 18 -#define BIGD_RAID_3_STATUS 19 -#define BIGD_RAID_4_STATUS 20 -#define BIGD_RAID_5_STATUS 21 -#define BIGD_RAID_6_STATUS 22 -#define BIGD_RAID_7_STATUS 23 - -/************************************************/ -/* Dale cable select bits */ -/************************************************/ -#define SEL_NONE 0x00 -#define SEL_1 0x01 -#define SEL_2 0x02 -#define SEL_3 0x04 -#define SEL_4 0x08 -#define SEL_NEW_SPEED_1 0x20 -#define SEL_COPY 0x40 -#define SEL_IRQ_OFF 0x80 - -/************************************************/ -/* Device/Geometry controls */ -/************************************************/ -#define GEOMETRY_NONE 0x0 // No device -#define GEOMETRY_SET 0x1 // Geometry set -#define GEOMETRY_LBA 0x2 // Geometry set in default LBA mode -#define GEOMETRY_PHOENIX 0x3 // Geometry set in Pheonix BIOS compatibility mode - -#define DEVICE_NONE 0x0 // No device present -#define DEVICE_INACTIVE 0x1 // device present but not registered active -#define DEVICE_ATAPI 0x2 // ATAPI device (CD_ROM, Tape, Etc...) -#define DEVICE_DASD_NONLBA 0x3 // Non LBA incompatible device -#define DEVICE_DASD_LBA 0x4 // LBA compatible device - -/************************************************/ -/* BigD fail register bits */ -/************************************************/ -#define FAIL_NONE 0x00 -#define FAIL_0 0x01 -#define FAIL_1 0x02 -#define FAIL_2 0x04 -#define FAIL_MULTIPLE 0x08 -#define FAIL_GOOD 0x20 -#define FAIL_AUDIBLE 0x40 -#define FAIL_ANY 0x80 - -/************************************************/ -/* Setup Structure Definitions */ -/************************************************/ -typedef struct // device setup parameters - { - UCHAR geometryControl; // geometry control flags - UCHAR device; // device code - USHORT sectors; // number of sectors per track - USHORT heads; // number of heads - USHORT cylinders; // number of cylinders for this device - ULONG blocks; // number of blocks on device - ULONG realCapacity; // number of real blocks on this device for drive changed testing - } SETUP_DEVICE, *PSETUP_DEVICE; - -typedef struct // master setup structure - { - USHORT startupDelay; - BOOL promptBIOS; - BOOL fastFormat; - BOOL shareInterrupt; - BOOL rebootRebuild; - USHORT timingMode; - USHORT spare5; - USHORT spare6; - SETUP_DEVICE setupDevice[BIGD_MAXDRIVES]; - } SETUP, *PSETUP; - -/************************************************/ -/* RAID Structure Definitions */ -/************************************************/ -typedef struct - { - UCHAR signature; // 0x55 our mirror signature - UCHAR status; // current status bits - UCHAR pairIdentifier; // unique identifier for pair - ULONG reconstructPoint; // recontruction point for hot reconstruct - } DISK_MIRROR; - -typedef struct DEVICE_RAID1 - { - long TotalSectors; - DISK_MIRROR DiskRaid1; - } DEVICE_RAID1, *PDEVICE_RAID1; - -#define DISK_MIRROR_POSITION 0x01A8 -#define SIGNATURE 0x55 - -#define MASK_SERIAL_NUMBER 0x0FFE // mask for serial number matching -#define MASK_SERIAL_UNIT 0x0001 // mask for unit portion of serial number - -// Status bits -#define UCBF_MIRRORED 0x0010 // drive has a pair -#define UCBF_MATCHED 0x0020 // drive pair is matched -#define UCBF_SURVIVOR 0x0040 // this unit is a survivor of a pair -#define UCBF_REBUILD 0x0080 // rebuild in progress on this device - -// SCSI controls for RAID -#define SC_MY_RAID 0xBF // our special CDB command byte for Win95... interface -#define MY_SCSI_QUERY1 0x32 // byte 1 subcommand to query driver for RAID 1 informatation -#define MY_SCSI_REBUILD 0x40 // byte 1 subcommand to reconstruct a mirrored pair -#define MY_SCSI_DEMOFAIL 0x54 // byte 1 subcommand for RAID failure demonstration -#define MY_SCSI_ALARMMUTE 0x60 // byte 1 subcommand to mute any alarm currently on - -/************************************************/ -/* Timeout konstants */ -/************************************************/ -#define TIMEOUT_READY 100 // 100 mSec -#define TIMEOUT_DRQ 300 // 300 mSec -#define TIMEOUT_DATA (3 * HZ) // 3 seconds - -/************************************************/ -/* Misc. macros */ -/************************************************/ -#define ANY2SCSI(up, p) \ -((UCHAR *)up)[0] = (((ULONG)(p)) >> 8); \ -((UCHAR *)up)[1] = ((ULONG)(p)); - -#define SCSI2LONG(up) \ -( (((long)*(((UCHAR *)up))) << 16) \ -+ (((long)(((UCHAR *)up)[1])) << 8) \ -+ ((long)(((UCHAR *)up)[2])) ) - -#define XANY2SCSI(up, p) \ -((UCHAR *)up)[0] = ((long)(p)) >> 24; \ -((UCHAR *)up)[1] = ((long)(p)) >> 16; \ -((UCHAR *)up)[2] = ((long)(p)) >> 8; \ -((UCHAR *)up)[3] = ((long)(p)); - -#define XSCSI2LONG(up) \ -( (((long)(((UCHAR *)up)[0])) << 24) \ -+ (((long)(((UCHAR *)up)[1])) << 16) \ -+ (((long)(((UCHAR *)up)[2])) << 8) \ -+ ((long)(((UCHAR *)up)[3])) ) - -#define SelectSpigot(padapter,spigot) outb_p (spigot, padapter->regStatSel) -#define WriteCommand(padapter,cmd) outb_p (cmd, padapter->regStatCmd) -#define AtapiDevice(padapter,b) outb_p (b, padapter->regLba24); -#define AtapiCountLo(padapter,b) outb_p (b, padapter->regLba8) -#define AtapiCountHi(padapter,b) outb_p (b, padapter->regLba16) - -/************************************************/ -/* SCSI CDB operation codes */ -/************************************************/ -#define SCSIOP_TEST_UNIT_READY 0x00 -#define SCSIOP_REZERO_UNIT 0x01 -#define SCSIOP_REWIND 0x01 -#define SCSIOP_REQUEST_BLOCK_ADDR 0x02 -#define SCSIOP_REQUEST_SENSE 0x03 -#define SCSIOP_FORMAT_UNIT 0x04 -#define SCSIOP_READ_BLOCK_LIMITS 0x05 -#define SCSIOP_REASSIGN_BLOCKS 0x07 -#define SCSIOP_READ6 0x08 -#define SCSIOP_RECEIVE 0x08 -#define SCSIOP_WRITE6 0x0A -#define SCSIOP_PRINT 0x0A -#define SCSIOP_SEND 0x0A -#define SCSIOP_SEEK6 0x0B -#define SCSIOP_TRACK_SELECT 0x0B -#define SCSIOP_SLEW_PRINT 0x0B -#define SCSIOP_SEEK_BLOCK 0x0C -#define SCSIOP_PARTITION 0x0D -#define SCSIOP_READ_REVERSE 0x0F -#define SCSIOP_WRITE_FILEMARKS 0x10 -#define SCSIOP_FLUSH_BUFFER 0x10 -#define SCSIOP_SPACE 0x11 -#define SCSIOP_INQUIRY 0x12 -#define SCSIOP_VERIFY6 0x13 -#define SCSIOP_RECOVER_BUF_DATA 0x14 -#define SCSIOP_MODE_SELECT 0x15 -#define SCSIOP_RESERVE_UNIT 0x16 -#define SCSIOP_RELEASE_UNIT 0x17 -#define SCSIOP_COPY 0x18 -#define SCSIOP_ERASE 0x19 -#define SCSIOP_MODE_SENSE 0x1A -#define SCSIOP_START_STOP_UNIT 0x1B -#define SCSIOP_STOP_PRINT 0x1B -#define SCSIOP_LOAD_UNLOAD 0x1B -#define SCSIOP_RECEIVE_DIAGNOSTIC 0x1C -#define SCSIOP_SEND_DIAGNOSTIC 0x1D -#define SCSIOP_MEDIUM_REMOVAL 0x1E -#define SCSIOP_READ_CAPACITY 0x25 -#define SCSIOP_READ 0x28 -#define SCSIOP_WRITE 0x2A -#define SCSIOP_SEEK 0x2B -#define SCSIOP_LOCATE 0x2B -#define SCSIOP_WRITE_VERIFY 0x2E -#define SCSIOP_VERIFY 0x2F -#define SCSIOP_SEARCH_DATA_HIGH 0x30 -#define SCSIOP_SEARCH_DATA_EQUAL 0x31 -#define SCSIOP_SEARCH_DATA_LOW 0x32 -#define SCSIOP_SET_LIMITS 0x33 -#define SCSIOP_READ_POSITION 0x34 -#define SCSIOP_SYNCHRONIZE_CACHE 0x35 -#define SCSIOP_COMPARE 0x39 -#define SCSIOP_COPY_COMPARE 0x3A -#define SCSIOP_WRITE_DATA_BUFF 0x3B -#define SCSIOP_READ_DATA_BUFF 0x3C -#define SCSIOP_CHANGE_DEFINITION 0x40 -#define SCSIOP_READ_SUB_CHANNEL 0x42 -#define SCSIOP_READ_TOC 0x43 -#define SCSIOP_READ_HEADER 0x44 -#define SCSIOP_PLAY_AUDIO 0x45 -#define SCSIOP_PLAY_AUDIO_MSF 0x47 -#define SCSIOP_PLAY_TRACK_INDEX 0x48 -#define SCSIOP_PLAY_TRACK_RELATIVE 0x49 -#define SCSIOP_PAUSE_RESUME 0x4B -#define SCSIOP_LOG_SELECT 0x4C -#define SCSIOP_LOG_SENSE 0x4D -#define SCSIOP_MODE_SELECT10 0x55 -#define SCSIOP_MODE_SENSE10 0x5A -#define SCSIOP_LOAD_UNLOAD_SLOT 0xA6 -#define SCSIOP_MECHANISM_STATUS 0xBD -#define SCSIOP_READ_CD 0xBE - -// IDE command definitions -#define IDE_COMMAND_ATAPI_RESET 0x08 -#define IDE_COMMAND_READ 0x20 -#define IDE_COMMAND_WRITE 0x30 -#define IDE_COMMAND_RECALIBRATE 0x10 -#define IDE_COMMAND_SEEK 0x70 -#define IDE_COMMAND_SET_PARAMETERS 0x91 -#define IDE_COMMAND_VERIFY 0x40 -#define IDE_COMMAND_ATAPI_PACKET 0xA0 -#define IDE_COMMAND_ATAPI_IDENTIFY 0xA1 -#define IDE_CMD_READ_MULTIPLE 0xC4 -#define IDE_CMD_WRITE_MULTIPLE 0xC5 -#define IDE_CMD_SET_MULTIPLE 0xC6 -#define IDE_COMMAND_IDENTIFY 0xEC - -// IDE status definitions -#define IDE_STATUS_ERROR 0x01 -#define IDE_STATUS_INDEX 0x02 -#define IDE_STATUS_CORRECTED_ERROR 0x04 -#define IDE_STATUS_DRQ 0x08 -#define IDE_STATUS_DSC 0x10 -#define IDE_STATUS_WRITE_FAULT 0x20 -#define IDE_STATUS_DRDY 0x40 -#define IDE_STATUS_BUSY 0x80 - -typedef struct _ATAPI_STATUS - { - CHAR check :1; - CHAR reserved1 :1; - CHAR corr :1; - CHAR drq :1; - CHAR dsc :1; - CHAR reserved2 :1; - CHAR drdy :1; - CHAR bsy :1; - } ATAPI_STATUS; - -typedef struct _ATAPI_REASON - { - CHAR cod :1; - CHAR io :1; - CHAR reserved1 :6; - } ATAPI_REASON; - -typedef struct _ATAPI_ERROR - { - CHAR ili :1; - CHAR eom :1; - CHAR abort :1; - CHAR mcr :1; - CHAR senseKey :4; - } ATAPI_ERROR; - -// IDE error definitions -#define IDE_ERROR_AMNF 0x01 -#define IDE_ERROR_TKONF 0x02 -#define IDE_ERROR_ABRT 0x04 -#define IDE_ERROR_MCR 0x08 -#define IDE_ERROR_IDFN 0x10 -#define IDE_ERROR_MC 0x20 -#define IDE_ERROR_UNC 0x40 -#define IDE_ERROR_BBK 0x80 - -// SCSI read capacity structure -typedef struct _READ_CAPACITY_DATA - { - ULONG blks; /* total blocks (converted to little endian) */ - ULONG blksiz; /* size of each (converted to little endian) */ - } READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA; - -// SCSI inquiry data -typedef struct _INQUIRYDATA - { - UCHAR DeviceType :5; - UCHAR DeviceTypeQualifier :3; - UCHAR DeviceTypeModifier :7; - UCHAR RemovableMedia :1; - UCHAR Versions; - UCHAR ResponseDataFormat; - UCHAR AdditionalLength; - UCHAR Reserved[2]; - UCHAR SoftReset :1; - UCHAR CommandQueue :1; - UCHAR Reserved2 :1; - UCHAR LinkedCommands :1; - UCHAR Synchronous :1; - UCHAR Wide16Bit :1; - UCHAR Wide32Bit :1; - UCHAR RelativeAddressing :1; - UCHAR VendorId[8]; - UCHAR ProductId[16]; - UCHAR ProductRevisionLevel[4]; - UCHAR VendorSpecific[20]; - UCHAR Reserved3[40]; - } INQUIRYDATA, *PINQUIRYDATA; - -// IDE IDENTIFY data -#pragma pack (1) -typedef struct _IDENTIFY_DATA - { - USHORT GeneralConfiguration; // 0 - USHORT NumberOfCylinders; // 1 - USHORT Reserved1; // 2 - USHORT NumberOfHeads; // 3 - USHORT UnformattedBytesPerTrack; // 4 - USHORT UnformattedBytesPerSector; // 5 - USHORT SectorsPerTrack; // 6 - USHORT NumBytesISG; // 7 Byte Len - inter-sector gap - USHORT NumBytesSync; // 8 - sync field - USHORT NumWordsVUS; // 9 Len - Vendor Unique Info - USHORT SerialNumber[10]; // 10 - USHORT BufferType; // 20 - USHORT BufferSectorSize; // 21 - USHORT NumberOfEccBytes; // 22 - USHORT FirmwareRevision[4]; // 23 - USHORT ModelNumber[20]; // 27 - USHORT NumSectorsPerInt :8; // 47 Multiple Mode - Sec/Blk - USHORT Reserved2 :8; // 47 - USHORT DoubleWordMode; // 48 flag for double word mode capable - USHORT VendorUnique1 :8; // 49 - USHORT SupportDMA :1; // 49 DMA supported - USHORT SupportLBA :1; // 49 LBA supported - USHORT SupportIORDYDisable :1; // 49 IORDY can be disabled - USHORT SupportIORDY :1; // 49 IORDY supported - USHORT ReservedPsuedoDMA :1; // 49 reserved for pseudo DMA mode support - USHORT Reserved3 :3; // 49 - USHORT Reserved4; // 50 - USHORT Reserved5 :8; // 51 Transfer Cycle Timing - PIO - USHORT PIOCycleTime :8; // 51 Transfer Cycle Timing - PIO - USHORT Reserved6 :8; // 52 - DMA - USHORT DMACycleTime :8; // 52 - DMA - USHORT Valid_54_58 :1; // 53 words 54 - 58 are valid - USHORT Valid_64_70 :1; // 53 words 64 - 70 are valid - USHORT Reserved7 :14; // 53 - USHORT LogNumCyl; // 54 Current Translation - Num Cyl - USHORT LogNumHeads; // 55 Num Heads - USHORT LogSectorsPerTrack; // 56 Sec/Trk - ULONG LogTotalSectors; // 57 Total Sec - USHORT CurrentNumSecPerInt :8; // 59 current setting for number of sectors per interrupt - USHORT ValidNumSecPerInt :1; // 59 Current setting is valid for number of sectors per interrupt - USHORT Reserved8 :7; // 59 - ULONG LBATotalSectors; // 60 LBA Mode - Sectors - USHORT DMASWordFlags; // 62 - USHORT DMAMWordFlags; // 63 - USHORT AdvancedPIOSupport :8; // 64 Flow control PIO transfer modes supported - USHORT Reserved9 :8; // 64 - USHORT MinMultiDMACycle; // 65 minimum multiword DMA transfer cycle time per word - USHORT RecomendDMACycle; // 66 Manufacturer's recommende multiword DMA transfer cycle time - USHORT MinPIOCycleWithoutFlow; // 67 Minimum PIO transfer cycle time without flow control - USHORT MinPIOCylceWithFlow; // 68 Minimum PIO transfer cycle time with IORDY flow control - USHORT ReservedSpace[256-69]; // 69 - } IDENTIFY_DATA, *PIDENTIFY_DATA; - -// ATAPI configuration bits -typedef struct _ATAPI_GENERAL_0 - { - USHORT CmdPacketSize :2; // Command packet size - USHORT Reserved1 :3; - USHORT CmdDrqType :2; - USHORT Removable :1; - USHORT DeviceType :5; - USHORT Reserved2 :1; - USHORT ProtocolType :2; - } ATAPI_GENERAL_0; - -#pragma pack () diff --git a/drivers/scsi/psi_roy.h b/drivers/scsi/psi_roy.h deleted file mode 100644 index c55b9c04c32a..000000000000 --- a/drivers/scsi/psi_roy.h +++ /dev/null @@ -1,331 +0,0 @@ -/**************************************************************************** - * Perceptive Solutions, Inc. PCI-2000 device driver for Linux. - * - * psi_roy.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters - * - * Copyright (c) 1997-1999 Perceptive Solutions, Inc. - * All Rights Reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that redistributions of source - * code retain the above copyright notice and this comment without - * modification. - * - * Technical updates and product information at: - * http://www.psidisk.com - * - * Please send questions, comments, bug reports to: - * tech@psidisk.com Technical Support - * - ****************************************************************************/ - -#ifndef ROY_HOST -#define ROY_HOST - -/************************************************/ -/* PCI setup */ -/************************************************/ -#define VENDOR_PSI 0x1256 -#define DEVICE_ROY_1 0x5201 /* 'R1' */ - -/************************************************/ -/* controller constants */ -/************************************************/ -#define MAXADAPTER 4 // Increase this and the sizes of the arrays below, if you need more. -#define MAX_BUS 2 -#define MAX_UNITS 16 -#define TIMEOUT_COMMAND 400 // number of milliSecondos for command busy timeout - -/************************************************/ -/* I/O address offsets */ -/************************************************/ -#define RTR_MAILBOX 0x040 -#define RTR_LOCAL_DOORBELL 0x060 -#define RTR_PCI_DOORBELL 0x064 - -/************************************************/ -/* */ -/* Host command codes */ -/* */ -/************************************************/ -#define CMD_READ_CHS 0x01 /* read sectors as specified (CHS mode) */ -#define CMD_READ 0x02 /* read sectors as specified (RBA mode) */ -#define CMD_READ_SG 0x03 /* read sectors using scatter/gather list */ -#define CMD_WRITE_CHS 0x04 /* write sectors as specified (CHS mode) */ -#define CMD_WRITE 0x05 /* write sectors as specified (RBA mode) */ -#define CMD_WRITE_SG 0x06 /* write sectors using scatter/gather list (LBA mode) */ -#define CMD_READ_CHS_SG 0x07 /* read sectors using scatter/gather list (CHS mode) */ -#define CMD_WRITE_CHS_SG 0x08 /* write sectors using scatter/gather list (CHS mode) */ -#define CMD_VERIFY_CHS 0x09 /* verify data on sectors as specified (CHS mode) */ -#define CMD_VERIFY 0x0A /* verify data on sectors as specified (RBA mode) */ -#define CMD_DASD_CDB 0x0B /* process CDB for a DASD device */ -#define CMD_DASD_CDB_SG 0x0C /* process CDB for a DASD device with scatter/gather */ - -#define CMD_READ_ABS 0x10 /* read absolute disk */ -#define CMD_WRITE_ABS 0x11 /* write absolute disk */ -#define CMD_VERIFY_ABS 0x12 /* verify absolute disk */ -#define CMD_TEST_READY 0x13 /* test unit ready and return status code */ -#define CMD_LOCK_DOOR 0x14 /* lock device door */ -#define CMD_UNLOCK_DOOR 0x15 /* unlock device door */ -#define CMD_EJECT_MEDIA 0x16 /* eject the media */ -#define CMD_UPDATE_CAP 0x17 /* update capacity information */ -#define CMD_TEST_PRIV 0x18 /* test and setup private format media */ - - -#define CMD_SCSI_THRU 0x30 /* SCSI pass through CDB */ -#define CMD_SCSI_THRU_SG 0x31 /* SCSI pass through CDB with scatter/gather */ -#define CMD_SCSI_REQ_SENSE 0x32 /* SCSI pass through request sense after check condition */ - -#define CMD_DASD_RAID_RQ 0x35 /* request DASD RAID drive data */ -#define CMD_DASD_RAID_RQ0 0x31 /* byte 1 subcommand to query for RAID 0 informatation */ -#define CMD_DASD_RAID_RQ1 0x32 /* byte 1 subcommand to query for RAID 1 informatation */ -#define CMD_DASD_RAID_RQ5 0x33 /* byte 1 subcommand to query for RAID 5 informatation */ - -#define CMD_DASD_SCSI_INQ 0x36 /* do DASD inquire and return in SCSI format */ -#define CMD_DASD_CAP 0x37 /* read DASD capacity */ -#define CMD_DASD_INQ 0x38 /* do DASD inquire for type data and return SCSI/EIDE inquiry */ -#define CMD_SCSI_INQ 0x39 /* do SCSI inquire */ -#define CMD_READ_SETUP 0x3A /* Get setup structures from controller */ -#define CMD_WRITE_SETUP 0x3B /* Put setup structures in controller and burn in flash */ -#define CMD_READ_CONFIG 0x3C /* Get the entire configuration and setup structures */ -#define CMD_WRITE_CONFIG 0x3D /* Put the entire configuration and setup structures in flash */ - -#define CMD_TEXT_DEVICE 0x3E /* obtain device text */ -#define CMD_TEXT_SIGNON 0x3F /* get sign on banner */ - -#define CMD_QUEUE 0x40 /* any command below this generates a queue tag interrupt to host*/ - -#define CMD_PREFETCH 0x40 /* prefetch sectors as specified */ -#define CMD_TEST_WRITE 0x41 /* Test a device for write protect */ -#define CMD_LAST_STATUS 0x42 /* get last command status and error data*/ -#define CMD_ABORT 0x43 /* abort command as specified */ -#define CMD_ERROR 0x44 /* fetch error code from a tagged op */ -#define CMD_DONE 0x45 /* done with operation */ -#define CMD_DIAGNOSTICS 0x46 /* execute controller diagnostics and wait for results */ -#define CMD_FEATURE_MODE 0x47 /* feature mode control word */ -#define CMD_DASD_INQUIRE 0x48 /* inquire as to DASD SCSI device (32 possible) */ -#define CMD_FEATURE_QUERY 0x49 /* query the feature control word */ -#define CMD_DASD_EJECT 0x4A /* Eject removable media for DASD type */ -#define CMD_DASD_LOCK 0x4B /* Lock removable media for DASD type */ -#define CMD_DASD_TYPE 0x4C /* obtain DASD device type */ -#define CMD_NUM_DEV 0x4D /* obtain the number of devices connected to the controller */ -#define CMD_GET_PARMS 0x4E /* obtain device parameters */ -#define CMD_SPECIFY 0x4F /* specify operating system for scatter/gather operations */ - -#define CMD_RAID_GET_DEV 0x50 /* read RAID device geometry */ -#define CMD_RAID_READ 0x51 /* read RAID 1 parameter block */ -#define CMD_RAID_WRITE 0x52 /* write RAID 1 parameter block */ -#define CMD_RAID_LITEUP 0x53 /* Light up the drive light for identification */ -#define CMD_RAID_REBUILD 0x54 /* issue a RAID 1 pair rebuild */ -#define CMD_RAID_MUTE 0x55 /* mute RAID failure alarm */ -#define CMD_RAID_FAIL 0x56 /* induce a RAID failure */ -#define CMD_RAID_STATUS 0x57 /* get status of RAID pair */ -#define CMD_RAID_STOP 0x58 /* stop any reconstruct in progress */ -#define CMD_RAID_START 0x59 /* start reconstruct */ -#define CMD_RAID0_READ 0x5A /* read RAID 0 parameter block */ -#define CMD_RAID0_WRITE 0x5B /* write RAID 0 parameter block */ -#define CMD_RAID5_READ 0x5C /* read RAID 5 parameter block */ -#define CMD_RAID5_WRITE 0x5D /* write RAID 5 parameter block */ - -#define CMD_ERASE_TABLES 0x5F /* erase partition table and RAID signatutures */ - -#define CMD_SCSI_GET 0x60 /* get SCSI pass through devices */ -#define CMD_SCSI_TIMEOUT 0x61 /* set SCSI pass through timeout */ -#define CMD_SCSI_ERROR 0x62 /* get SCSI pass through request sense length and residual data count */ -#define CMD_GET_SPARMS 0x63 /* get SCSI bus and user parms */ -#define CMD_SCSI_ABORT 0x64 /* abort by setting time-out to zero */ - -#define CMD_CHIRP_CHIRP 0x77 /* make a chirp chirp sound */ -#define CMD_GET_LAST_DONE 0x78 /* get tag of last done in progress */ -#define CMD_GET_FEATURES 0x79 /* get feature code and ESN */ -#define CMD_CLEAR_CACHE 0x7A /* Clear cache on specified device */ -#define CMD_BIOS_TEST 0x7B /* Test whether or not to load BIOS */ -#define CMD_WAIT_FLUSH 0x7C /* wait for cache flushed and invalidate read cache */ -#define CMD_RESET_BUS 0x7D /* reset the SCSI bus */ -#define CMD_STARTUP_QRY 0x7E /* startup in progress query */ -#define CMD_RESET 0x7F /* reset the controller */ - -#define CMD_RESTART_RESET 0x80 /* reload and restart the controller at any reset issued */ -#define CMD_SOFT_RESET 0x81 /* do a soft reset NOW! */ - -/************************************************/ -/* */ -/* Host return errors */ -/* */ -/************************************************/ -#define ERR08_TAGGED 0x80 /* doorbell error ored with tag */ - -#define ERR16_NONE 0x0000 /* no errors */ -#define ERR16_SC_COND_MET 0x0004 /* SCSI status - Condition Met */ -#define ERR16_CMD 0x0101 /* command error */ -#define ERR16_SC_CHECK_COND 0x0002 /* SCSI status - Check Condition */ -#define ERR16_CMD_NOT 0x0201 /* command not supported */ -#define ERR16_NO_DEVICE 0x0301 /* invalid device selection */ -#define ERR16_SECTOR 0x0202 /* bad sector */ -#define ERR16_PROTECT 0x0303 /* write protected */ -#define ERR16_NOSECTOR 0x0404 /* sector not found */ -#define ERR16_MEDIA 0x0C0C /* invalid media */ -#define ERR16_CONTROL 0x2020 /* controller error */ -#define ERR16_CONTROL_DMA 0x2120 /* controller DMA engine error */ -#define ERR16_NO_ALARM 0x2220 /* alarm is not active */ -#define ERR16_OP_BUSY 0x2320 /* operation busy */ -#define ERR16_SEEK 0x4040 /* seek failure */ -#define ERR16_DEVICE_FAIL 0x4140 /* device has failed */ -#define ERR16_TIMEOUT 0x8080 /* timeout error */ -#define ERR16_DEV_NOT_READY 0xAAAA /* drive not ready */ -#define ERR16_UNDEFINED 0xBBBB /* undefined error */ -#define ERR16_WRITE_FAULT 0xCCCC /* write fault */ -#define ERR16_INVALID_DEV 0x4001 /* invalid device access */ -#define ERR16_DEVICE_BUSY 0x4002 /* device is busy */ -#define ERR16_MEMORY 0x4003 /* device pass thru requires too much memory */ -#define ERR16_NO_FEATURE 0x40FA /* feature no implemented */ -#define ERR16_NOTAG 0x40FD /* no tag space available */ -#define ERR16_NOT_READY 0x40FE /* controller not ready error */ -#define ERR16_SETUP_FLASH 0x5050 /* error when writing setup to flash memory */ -#define ERR16_SETUP_SIZE 0x5051 /* setup block size error */ -#define ERR16_SENSE 0xFFFF /* sense opereration failed */ -#define ERR16_SC_BUSY 0x0008 /* SCSI status - Busy */ -#define ERR16_SC_RES_CONFL 0x0018 /* SCSI status - Reservation Conflict */ -#define ERR16_SC_CMD_TERM 0x0022 /* SCSI status - Command Terminated */ -#define ERR16_SC_OTHER 0x00FF /* SCSI status - not recognized (any value masked) */ -#define ERR16_MEDIA_CHANGED 0x8001 /* devices media has been changed */ - -#define ERR32_NONE 0x00000000 /* no errors */ -#define ERR32_SC_COND_MET 0x00000004 /* SCSI status - Condition Met */ -#define ERR32_CMD 0x00010101 /* command error */ -#define ERR32_SC_CHECK_COND 0x00020002 /* SCSI status - Check Condition */ -#define ERR32_CMD_NOT 0x00030201 /* command not supported */ -#define ERR32_NO_DEVICE 0x00040301 /* invalid device selection */ -#define ERR32_SECTOR 0x00050202 /* bad sector */ -#define ERR32_PROTECT 0x00060303 /* write protected */ -#define ERR32_NOSECTOR 0x00070404 /* sector not found */ -#define ERR32_MEDIA 0x00080C0C /* invalid media */ -#define ERR32_CONTROL 0x00092020 /* controller error */ -#define ERR32_CONTROL_DMA 0x000A2120 /* Controller DMA error */ -#define ERR32_NO_ALARM 0x000B2220 /* alarm is not active */ -#define ERR32_OP_BUSY 0x000C2320 /* operation busy */ -#define ERR32_SEEK 0x000D4040 /* seek failure */ -#define ERR32_DEVICE_FAIL 0x000E4140 /* device has failed */ -#define ERR32_TIMEOUT 0x000F8080 /* timeout error */ -#define ERR32_DEV_NOT_READY 0x0010AAAA /* drive not ready */ -#define ERR32_UNDEFINED 0x0011BBBB /* undefined error */ -#define ERR32_WRITE_FAULT 0x0012CCCC /* write fault */ -#define ERR32_INVALID_DEV 0x00134001 /* invalid device access */ -#define ERR32_DEVICE_BUSY 0x00144002 /* device is busy */ -#define ERR32_MEMORY 0x00154003 /* device pass thru requires too much memory */ -#define ERR32_NO_FEATURE 0x001640FA /* feature no implemented */ -#define ERR32_NOTAG 0x001740FD /* no tag space available */ -#define ERR32_NOT_READY 0x001840FE /* controller not ready error */ -#define ERR32_SETUP_FLASH 0x00195050 /* error when writing setup to flash memory */ -#define ERR32_SETUP_SIZE 0x001A5051 /* setup block size error */ -#define ERR32_SENSE 0x001BFFFF /* sense opereration failed */ -#define ERR32_SC_BUSY 0x001C0008 /* SCSI status - Busy */ -#define ERR32_SC_RES_CONFL 0x001D0018 /* SCSI status - Reservation Conflict */ -#define ERR32_SC_CMD_TERM 0x001E0022 /* SCSI status - Command Terminated */ -#define ERR32_SC_OTHER 0x001F00FF /* SCSI status - not recognized (any value masked) */ -#define ERR32_MEDIA_CHANGED 0x00208001 /* devices media has been changed */ - -/************************************************/ -/* */ -/* Host Operating System specification codes */ -/* */ -/************************************************/ -#define SPEC_INTERRUPT 0x80 /* specification requires host interrupt */ -#define SPEC_BACKWARD_SG 0x40 /* specification requires scatter/gather items reversed */ -#define SPEC_DOS_BLOCK 0x01 /* DOS DASD blocking on pass through */ -#define SPEC_OS2_V3 0x02 /* OS/2 Warp */ -#define SPCE_SCO_3242 0x04 /* SCO 3.4.2.2 */ -#define SPEC_QNX_4X 0x05 /* QNX 4.XX */ -#define SPEC_NOVELL_NWPA 0x08 /* Novell NWPA scatter/gather support */ - -/************************************************/ -/* */ -/* Inquire structures */ -/* */ -/************************************************/ -typedef struct _CNT_SCSI_INQ - { - UCHAR devt; /* 00: device type */ - UCHAR devtm; /* 01: device type modifier */ - UCHAR svers; /* 02: SCSI version */ - UCHAR rfmt; /* 03: response data format */ - UCHAR adlen; /* 04: additional length of data */ - UCHAR res1; /* 05: */ - UCHAR res2; /* 06: */ - UCHAR fncs; /* 07: functional capabilities */ - UCHAR vid[8]; /* 08: vendor ID */ - UCHAR pid[16]; /* 10: product ID */ - UCHAR rev[4]; /* 20: product revision */ - } CNT_SCSI_INQ; - -typedef struct _CNT_IDE_INQ - { - USHORT GeneralConfiguration; /* 00 */ - USHORT NumberOfCylinders; /* 02 */ - USHORT Reserved1; /* 04 */ - USHORT NumberOfHeads; /* 06 */ - USHORT UnformattedBytesPerTrack; /* 08 */ - USHORT UnformattedBytesPerSector; /* 0A */ - USHORT SectorsPerTrack; /* 0C */ - USHORT VendorUnique1[3]; /* 0E */ - USHORT SerialNumber[10]; /* 14 */ - USHORT BufferType; /* 28 */ - USHORT BufferSectorSize; /* 2A */ - USHORT NumberOfEccBytes; /* 2C */ - USHORT FirmwareRevision[4]; /* 2E */ - USHORT ModelNumber[20]; /* 36 */ - UCHAR MaximumBlockTransfer; /* 5E */ - UCHAR VendorUnique2; /* 5F */ - USHORT DoubleWordIo; /* 60 */ - USHORT Capabilities; /* 62 */ - USHORT Reserved2; /* 64 */ - UCHAR VendorUnique3; /* 66 */ - UCHAR PioCycleTimingMode; /* 67 */ - UCHAR VendorUnique4; /* 68 */ - UCHAR DmaCycleTimingMode; /* 69 */ - USHORT TranslationFieldsValid; /* 6A */ - USHORT NumberOfCurrentCylinders; /* 6C */ - USHORT NumberOfCurrentHeads; /* 6E */ - USHORT CurrentSectorsPerTrack; /* 70 */ - ULONG CurrentSectorCapacity; /* 72 */ - } CNT_IDE_INQ; - -typedef struct _DASD_INQUIRE - { - ULONG type; /* 0 = SCSI, 1 = IDE */ - union - { - CNT_SCSI_INQ scsi; /* SCSI inquire data */ - CNT_IDE_INQ ide; /* IDE inquire data */ - } inq; - } DASD_INQUIRE; - -/************************************************/ -/* */ -/* Device Codes */ -/* */ -/************************************************/ -#define DEVC_DASD 0x00 /* Direct-access Storage Device */ -#define DEVC_SEQACESS 0x01 /* Sequential-access device */ -#define DEVC_PRINTER 0x02 /* Printer device */ -#define DEVC_PROCESSOR 0x03 /* Processor device */ -#define DEVC_WRITEONCE 0x04 /* Write-once device */ -#define DEVC_CDROM 0x05 /* CD-ROM device */ -#define DEVC_SCANNER 0x06 /* Scanner device */ -#define DEVC_OPTICAL 0x07 /* Optical memory device */ -#define DEVC_MEDCHGR 0x08 /* Medium changer device */ -#define DEVC_DASD_REMOVABLE 0x80 /* Direct-access storage device, Removable */ -#define DEVC_NONE 0xFF /* no device */ - -// SCSI controls for RAID -#define SC_MY_RAID 0xBF // our special CDB command byte for Win95... interface -#define MY_SCSI_QUERY0 0x31 // byte 1 subcommand to query driver for RAID 0 informatation -#define MY_SCSI_QUERY1 0x32 // byte 1 subcommand to query driver for RAID 1 informatation -#define MY_SCSI_QUERY5 0x33 // byte 1 subcommand to query driver for RAID 5 informatation -#define MY_SCSI_REBUILD 0x40 // byte 1 subcommand to reconstruct a mirrored pair -#define MY_SCSI_DEMOFAIL 0x54 // byte 1 subcommand for RAID failure demonstration -#define MY_SCSI_ALARMMUTE 0x60 // byte 1 subcommand to mute any alarm currently on - - -#endif -