From: Chun-Hao Lin Date: Mon, 1 Aug 2016 05:45:30 +0000 (+0800) Subject: 8139too: fix system hang when there is a tx timeout event. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0a2f0d2de4ed9bd73e2c8d604863399ed6a20527;p=linux-beck.git 8139too: fix system hang when there is a tx timeout event. If tx timeout event occur, kernel will call rtl8139_tx_timeout_task() to reset hardware. But in this function, driver does not stop tx and rx function before reset hardware, that will cause system hang. In this patch, add stop tx and rx function before reset hardware. Signed-off-by: Chunhao Lin Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/realtek/8139too.c b/drivers/net/ethernet/realtek/8139too.c index ef668d300800..da4c2d8a4173 100644 --- a/drivers/net/ethernet/realtek/8139too.c +++ b/drivers/net/ethernet/realtek/8139too.c @@ -1667,6 +1667,10 @@ static void rtl8139_tx_timeout_task (struct work_struct *work) int i; u8 tmp8; + napi_disable(&tp->napi); + netif_stop_queue(dev); + synchronize_sched(); + netdev_dbg(dev, "Transmit timeout, status %02x %04x %04x media %02x\n", RTL_R8(ChipCmd), RTL_R16(IntrStatus), RTL_R16(IntrMask), RTL_R8(MediaStatus)); @@ -1696,10 +1700,10 @@ static void rtl8139_tx_timeout_task (struct work_struct *work) spin_unlock_irq(&tp->lock); /* ...and finally, reset everything */ - if (netif_running(dev)) { - rtl8139_hw_start (dev); - netif_wake_queue (dev); - } + napi_enable(&tp->napi); + rtl8139_hw_start(dev); + netif_wake_queue(dev); + spin_unlock_bh(&tp->rx_lock); }