From: Ben Skeggs <bskeggs@redhat.com>
Date: Thu, 27 Oct 2011 02:02:12 +0000 (+1000)
Subject: drm/nouveau/pm: change volt/fan before upclock, but after downclock
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0b627a0b23404d97d1720c0c1abaee602aee9518;p=linux-beck.git

drm/nouveau/pm: change volt/fan before upclock, but after downclock

Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
---

diff --git a/drivers/gpu/drm/nouveau/nouveau_pm.c b/drivers/gpu/drm/nouveau/nouveau_pm.c
index 4df8e0090df3..c6ebf693ffb8 100644
--- a/drivers/gpu/drm/nouveau/nouveau_pm.c
+++ b/drivers/gpu/drm/nouveau/nouveau_pm.c
@@ -97,39 +97,62 @@ nouveau_pwmfan_set(struct drm_device *dev, int percent)
 }
 
 static int
-nouveau_pm_perflvl_set(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+nouveau_pm_perflvl_aux(struct drm_device *dev, struct nouveau_pm_level *perflvl,
+		       struct nouveau_pm_level *a, struct nouveau_pm_level *b)
 {
 	struct drm_nouveau_private *dev_priv = dev->dev_private;
 	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
-	void *state;
 	int ret;
 
-	if (perflvl == pm->cur)
-		return 0;
-
 	/*XXX: not on all boards, we should control based on temperature
 	 *     on recent boards..  or maybe on some other factor we don't
 	 *     know about?
 	 */
-	if (perflvl->fanspeed) {
+	if (a->fanspeed && b->fanspeed && b->fanspeed > a->fanspeed) {
 		ret = nouveau_pwmfan_set(dev, perflvl->fanspeed);
-		if (ret && ret != -ENODEV)
-			NV_ERROR(dev, "set fanspeed failed: %d\n", ret);
+		if (ret && ret != -ENODEV) {
+			NV_ERROR(dev, "fanspeed set failed: %d\n", ret);
+			return ret;
+		}
 	}
 
-	if (pm->voltage.supported && pm->voltage_set && perflvl->volt_min) {
-		ret = pm->voltage_set(dev, perflvl->volt_min);
-		if (ret) {
-			NV_ERROR(dev, "voltage_set %d failed: %d\n",
-				 perflvl->volt_min, ret);
+	if (pm->voltage.supported && pm->voltage_set) {
+		if (a->volt_min && b->volt_min && b->volt_min > a->volt_min) {
+			ret = pm->voltage_set(dev, perflvl->volt_min);
+			if (ret) {
+				NV_ERROR(dev, "voltage set failed: %d\n", ret);
+				return ret;
+			}
 		}
 	}
 
+	return 0;
+}
+
+static int
+nouveau_pm_perflvl_set(struct drm_device *dev, struct nouveau_pm_level *perflvl)
+{
+	struct drm_nouveau_private *dev_priv = dev->dev_private;
+	struct nouveau_pm_engine *pm = &dev_priv->engine.pm;
+	void *state;
+	int ret;
+
+	if (perflvl == pm->cur)
+		return 0;
+
+	ret = nouveau_pm_perflvl_aux(dev, perflvl, pm->cur, perflvl);
+	if (ret)
+		return ret;
+
 	state = pm->clocks_pre(dev, perflvl);
 	if (IS_ERR(state))
 		return PTR_ERR(state);
 	pm->clocks_set(dev, state);
 
+	ret = nouveau_pm_perflvl_aux(dev, perflvl, perflvl, pm->cur);
+	if (ret)
+		return ret;
+
 	pm->cur = perflvl;
 	return 0;
 }