From: Alan Cox Date: Tue, 31 Jul 2007 13:01:48 +0000 (+0100) Subject: libata: Correct IORDY handling X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0bc2a79a2002e3cc1b514c100b6c576983da6a90;p=linux-beck.git libata: Correct IORDY handling Debugging a report of a problem with an ancient solid state disk showed up some problems in the IORDY handling 1. We check the wrong bit to see if the device has IORDY 2. Even then some ancient creaking piles of crap don't support SETXFER at all. The cases it fixes are obscure and the risk of side effects is slight but possible. This also moves us slightly closer to supporting original MFM/RLL disks with libata. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 8a79b976f08a..02425e401a6d 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -2759,7 +2759,11 @@ static int ata_dev_set_mode(struct ata_device *dev) /* Old CFA may refuse this command, which is just fine */ if (dev->xfer_shift == ATA_SHIFT_PIO && ata_id_is_cfa(dev->id)) err_mask &= ~AC_ERR_DEV; - + /* Some very old devices and some bad newer ones fail any kind of + SET_XFERMODE request but support PIO0-2 timings and no IORDY */ + if (dev->xfer_shift == ATA_SHIFT_PIO && !ata_id_has_iordy(dev->id) && + dev->pio_mode <= XFER_PIO_2) + err_mask &= ~AC_ERR_DEV; if (err_mask) { ata_dev_printk(dev, KERN_ERR, "failed to set xfermode " "(err_mask=0x%x)\n", err_mask); diff --git a/include/linux/ata.h b/include/linux/ata.h index c043c1ccf1c5..40c7af05fdb9 100644 --- a/include/linux/ata.h +++ b/include/linux/ata.h @@ -358,7 +358,7 @@ struct ata_taskfile { #define ata_id_removeable(id) ((id)[0] & (1 << 7)) #define ata_id_has_dword_io(id) ((id)[50] & (1 << 0)) #define ata_id_iordy_disable(id) ((id)[49] & (1 << 10)) -#define ata_id_has_iordy(id) ((id)[49] & (1 << 9)) +#define ata_id_has_iordy(id) ((id)[49] & (1 << 11)) #define ata_id_u32(id,n) \ (((u32) (id)[(n) + 1] << 16) | ((u32) (id)[(n)])) #define ata_id_u64(id,n) \