From: Guenter Roeck Date: Wed, 9 Mar 2011 06:01:39 +0000 (-0800) Subject: hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0c0a0615163e025eb978547969467012529e01d5;p=linux-beck.git hwmon: (pmbus) Support for TI UCD90xxx series Sequencer and System Health Controllers Hardware monitoring support for TI UCD90120, UCD90124, UCD9090, and UCD90910 Sequencer and System Health Controllers. Signed-off-by: Guenter Roeck Reviewed-by: Tom Grennan --- diff --git a/Documentation/hwmon/ucd9000 b/Documentation/hwmon/ucd9000 new file mode 100644 index 000000000000..40ca6db50c48 --- /dev/null +++ b/Documentation/hwmon/ucd9000 @@ -0,0 +1,110 @@ +Kernel driver ucd9000 +===================== + +Supported chips: + * TI UCD90120, UCD90124, UCD9090, and UCD90910 + Prefixes: 'ucd90120', 'ucd90124', 'ucd9090', 'ucd90910' + Addresses scanned: - + Datasheets: + http://focus.ti.com/lit/ds/symlink/ucd90120.pdf + http://focus.ti.com/lit/ds/symlink/ucd90124.pdf + http://focus.ti.com/lit/ds/symlink/ucd9090.pdf + http://focus.ti.com/lit/ds/symlink/ucd90910.pdf + +Author: Guenter Roeck + + +Description +----------- + +From datasheets: + +The UCD90120 Power Supply Sequencer and System Health Monitor monitors and +sequences up to 12 independent voltage rails. The device integrates a 12-bit +ADC with a 2.5V internal reference for monitoring up to 13 power supply voltage, +current, or temperature inputs. + +The UCD90124 is a 12-rail PMBus/I2C addressable power-supply sequencer and +system-health monitor. The device integrates a 12-bit ADC for monitoring up to +13 power-supply voltage, current, or temperature inputs. Twenty-six GPIO pins +can be used for power supply enables, power-on reset signals, external +interrupts, cascading, or other system functions. Twelve of these pins offer PWM +functionality. Using these pins, the UCD90124 offers support for fan control, +margining, and general-purpose PWM functions. + +The UCD9090 is a 10-rail PMBus/I2C addressable power-supply sequencer and +monitor. The device integrates a 12-bit ADC for monitoring up to 10 power-supply +voltage inputs. Twenty-three GPIO pins can be used for power supply enables, +power-on reset signals, external interrupts, cascading, or other system +functions. Ten of these pins offer PWM functionality. Using these pins, the +UCD9090 offers support for margining, and general-purpose PWM functions. + +The UCD90910 is a ten-rail I2C / PMBus addressable power-supply sequencer and +system-health monitor. The device integrates a 12-bit ADC for monitoring up to +13 power-supply voltage, current, or temperature inputs. + +This driver is a client driver to the core PMBus driver. Please see +Documentation/hwmon/pmbus for details on PMBus client drivers. + + +Usage Notes +----------- + +This driver does not auto-detect devices. You will have to instantiate the +devices explicitly. Please see Documentation/i2c/instantiating-devices for +details. + + +Platform data support +--------------------- + +The driver supports standard PMBus driver platform data. Please see +Documentation/hwmon/pmbus for details. + + +Sysfs entries +------------- + +The following attributes are supported. Limits are read-write; all other +attributes are read-only. + +in[1-12]_label "vout[1-12]". +in[1-12]_input Measured voltage. From READ_VOUT register. +in[1-12]_min Minumum Voltage. From VOUT_UV_WARN_LIMIT register. +in[1-12]_max Maximum voltage. From VOUT_OV_WARN_LIMIT register. +in[1-12]_lcrit Critical minumum Voltage. VOUT_UV_FAULT_LIMIT register. +in[1-12]_crit Critical maximum voltage. From VOUT_OV_FAULT_LIMIT register. +in[1-12]_min_alarm Voltage low alarm. From VOLTAGE_UV_WARNING status. +in[1-12]_max_alarm Voltage high alarm. From VOLTAGE_OV_WARNING status. +in[1-12]_lcrit_alarm Voltage critical low alarm. From VOLTAGE_UV_FAULT status. +in[1-12]_crit_alarm Voltage critical high alarm. From VOLTAGE_OV_FAULT status. + +curr[1-12]_label "iout[1-12]". +curr[1-12]_input Measured current. From READ_IOUT register. +curr[1-12]_max Maximum current. From IOUT_OC_WARN_LIMIT register. +curr[1-12]_lcrit Critical minumum output current. From IOUT_UC_FAULT_LIMIT + register. +curr[1-12]_crit Critical maximum current. From IOUT_OC_FAULT_LIMIT register. +curr[1-12]_max_alarm Current high alarm. From IOUT_OC_WARNING status. +curr[1-12]_crit_alarm Current critical high alarm. From IOUT_OC_FAULT status. + + For each attribute index, either voltage or current is + reported, but not both. If voltage or current is + reported depends on the chip configuration. + +temp[1-2]_input Measured temperatures. From READ_TEMPERATURE_1 and + READ_TEMPERATURE_2 registers. +temp[1-2]_max Maximum temperature. From OT_WARN_LIMIT register. +temp[1-2]_crit Critical high temperature. From OT_FAULT_LIMIT register. +temp[1-2]_max_alarm Temperature high alarm. +temp[1-2]_crit_alarm Temperature critical high alarm. + +fan[1-4]_input Fan RPM. +fan[1-4]_alarm Fan alarm. +fan[1-4]_fault Fan fault. + + Fan attributes are only available on chips supporting + fan control (UCD90124, UCD90910). Attribute files are + created only for enabled fans. + Note that even though UCD90910 supports up to 10 fans, + only up to four fans are currently supported. diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 07c4a860dffe..d00fd39f6ee3 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -857,12 +857,24 @@ config SENSORS_MAX8688 This driver can also be built as a module. If so, the module will be called max8688. +config SENSORS_UCD9000 + tristate "TI UCD90120, UCD90124, UCD9090, UCD90910" + default n + help + If you say yes here you get hardware monitoring support for TI + UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health + Controllers. + + This driver can also be built as a module. If so, the module will + be called ucd9000. + config SENSORS_UCD9200 tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248" default n help If you say yes here you get hardware monitoring support for TI - UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248. + UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248 + Digital PWM System Controllers. This driver can also be built as a module. If so, the module will be called ucd9200. diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 1afe02961dec..c4a269b06925 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -123,6 +123,7 @@ obj-$(CONFIG_SENSORS_PMBUS) += pmbus.o obj-$(CONFIG_SENSORS_MAX16064) += max16064.o obj-$(CONFIG_SENSORS_MAX34440) += max34440.o obj-$(CONFIG_SENSORS_MAX8688) += max8688.o +obj-$(CONFIG_SENSORS_UCD9000) += ucd9000.o obj-$(CONFIG_SENSORS_UCD9200) += ucd9200.o ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG diff --git a/drivers/hwmon/ucd9000.c b/drivers/hwmon/ucd9000.c new file mode 100644 index 000000000000..ace1c7319734 --- /dev/null +++ b/drivers/hwmon/ucd9000.c @@ -0,0 +1,278 @@ +/* + * Hardware monitoring driver for UCD90xxx Sequencer and System Health + * Controller series + * + * Copyright (C) 2011 Ericsson AB. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include "pmbus.h" + +enum chips { ucd9000, ucd90120, ucd90124, ucd9090, ucd90910 }; + +#define UCD9000_MONITOR_CONFIG 0xd5 +#define UCD9000_NUM_PAGES 0xd6 +#define UCD9000_FAN_CONFIG_INDEX 0xe7 +#define UCD9000_FAN_CONFIG 0xe8 +#define UCD9000_DEVICE_ID 0xfd + +#define UCD9000_MON_TYPE(x) (((x) >> 5) & 0x07) +#define UCD9000_MON_PAGE(x) ((x) & 0x0f) + +#define UCD9000_MON_VOLTAGE 1 +#define UCD9000_MON_TEMPERATURE 2 +#define UCD9000_MON_CURRENT 3 +#define UCD9000_MON_VOLTAGE_HW 4 + +#define UCD9000_NUM_FAN 4 + +struct ucd9000_data { + u8 fan_data[UCD9000_NUM_FAN][I2C_SMBUS_BLOCK_MAX]; + struct pmbus_driver_info info; +}; +#define to_ucd9000_data(_info) container_of(_info, struct ucd9000_data, info) + +static int ucd9000_get_fan_config(struct i2c_client *client, int fan) +{ + int fan_config = 0; + struct ucd9000_data *data + = to_ucd9000_data(pmbus_get_driver_info(client)); + + if (data->fan_data[fan][3] & 1) + fan_config |= PB_FAN_2_INSTALLED; /* Use lower bit position */ + + /* Pulses/revolution */ + fan_config |= (data->fan_data[fan][3] & 0x06) >> 1; + + return fan_config; +} + +static int ucd9000_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret = 0; + int fan_config; + + switch (reg) { + case PMBUS_FAN_CONFIG_12: + if (page) + return -EINVAL; + + ret = ucd9000_get_fan_config(client, 0); + if (ret < 0) + return ret; + fan_config = ret << 4; + ret = ucd9000_get_fan_config(client, 1); + if (ret < 0) + return ret; + fan_config |= ret; + ret = fan_config; + break; + case PMBUS_FAN_CONFIG_34: + if (page) + return -EINVAL; + + ret = ucd9000_get_fan_config(client, 2); + if (ret < 0) + return ret; + fan_config = ret << 4; + ret = ucd9000_get_fan_config(client, 3); + if (ret < 0) + return ret; + fan_config |= ret; + ret = fan_config; + break; + default: + ret = -ENODATA; + break; + } + return ret; +} + +static const struct i2c_device_id ucd9000_id[] = { + {"ucd9000", ucd9000}, + {"ucd90120", ucd90120}, + {"ucd90124", ucd90124}, + {"ucd9090", ucd9090}, + {"ucd90910", ucd90910}, + {} +}; +MODULE_DEVICE_TABLE(i2c, ucd9000_id); + +static int ucd9000_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + u8 block_buffer[I2C_SMBUS_BLOCK_MAX + 1]; + struct ucd9000_data *data; + struct pmbus_driver_info *info; + const struct i2c_device_id *mid; + int i, ret; + + if (!i2c_check_functionality(client->adapter, + I2C_FUNC_SMBUS_BYTE_DATA | + I2C_FUNC_SMBUS_BLOCK_DATA)) + return -ENODEV; + + ret = i2c_smbus_read_block_data(client, UCD9000_DEVICE_ID, + block_buffer); + if (ret < 0) { + dev_err(&client->dev, "Failed to read device ID\n"); + return ret; + } + block_buffer[ret] = '\0'; + dev_info(&client->dev, "Device ID %s\n", block_buffer); + + mid = NULL; + for (i = 0; i < ARRAY_SIZE(ucd9000_id); i++) { + mid = &ucd9000_id[i]; + if (!strncasecmp(mid->name, block_buffer, strlen(mid->name))) + break; + } + if (!mid || !strlen(mid->name)) { + dev_err(&client->dev, "Unsupported device\n"); + return -ENODEV; + } + + if (id->driver_data != ucd9000 && id->driver_data != mid->driver_data) + dev_notice(&client->dev, + "Device mismatch: Configured %s, detected %s\n", + id->name, mid->name); + + data = kzalloc(sizeof(struct ucd9000_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + info = &data->info; + + ret = i2c_smbus_read_byte_data(client, UCD9000_NUM_PAGES); + if (ret < 0) { + dev_err(&client->dev, + "Failed to read number of active pages\n"); + goto out; + } + info->pages = ret; + if (!info->pages) { + dev_err(&client->dev, "No pages configured\n"); + ret = -ENODEV; + goto out; + } + + /* The internal temperature sensor is always active */ + info->func[0] = PMBUS_HAVE_TEMP; + + /* Everything else is configurable */ + ret = i2c_smbus_read_block_data(client, UCD9000_MONITOR_CONFIG, + block_buffer); + if (ret <= 0) { + dev_err(&client->dev, "Failed to read configuration data\n"); + ret = -ENODEV; + goto out; + } + for (i = 0; i < ret; i++) { + int page = UCD9000_MON_PAGE(block_buffer[i]); + + if (page >= info->pages) + continue; + + switch (UCD9000_MON_TYPE(block_buffer[i])) { + case UCD9000_MON_VOLTAGE: + case UCD9000_MON_VOLTAGE_HW: + info->func[page] |= PMBUS_HAVE_VOUT + | PMBUS_HAVE_STATUS_VOUT; + break; + case UCD9000_MON_TEMPERATURE: + info->func[page] |= PMBUS_HAVE_TEMP2 + | PMBUS_HAVE_STATUS_TEMP; + break; + case UCD9000_MON_CURRENT: + info->func[page] |= PMBUS_HAVE_IOUT + | PMBUS_HAVE_STATUS_IOUT; + break; + default: + break; + } + } + + /* Fan configuration */ + if (mid->driver_data == ucd90124) { + for (i = 0; i < UCD9000_NUM_FAN; i++) { + i2c_smbus_write_byte_data(client, + UCD9000_FAN_CONFIG_INDEX, i); + ret = i2c_smbus_read_block_data(client, + UCD9000_FAN_CONFIG, + data->fan_data[i]); + if (ret < 0) + goto out; + } + i2c_smbus_write_byte_data(client, UCD9000_FAN_CONFIG_INDEX, 0); + + info->read_byte_data = ucd9000_read_byte_data; + info->func[0] |= PMBUS_HAVE_FAN12 | PMBUS_HAVE_STATUS_FAN12 + | PMBUS_HAVE_FAN34 | PMBUS_HAVE_STATUS_FAN34; + } + + ret = pmbus_do_probe(client, mid, info); + if (ret < 0) + goto out; + return 0; + +out: + kfree(data); + return ret; +} + +static int ucd9000_remove(struct i2c_client *client) +{ + int ret; + struct ucd9000_data *data; + + data = to_ucd9000_data(pmbus_get_driver_info(client)); + ret = pmbus_do_remove(client); + kfree(data); + return ret; +} + + +/* This is the driver that will be inserted */ +static struct i2c_driver ucd9000_driver = { + .driver = { + .name = "ucd9000", + }, + .probe = ucd9000_probe, + .remove = ucd9000_remove, + .id_table = ucd9000_id, +}; + +static int __init ucd9000_init(void) +{ + return i2c_add_driver(&ucd9000_driver); +} + +static void __exit ucd9000_exit(void) +{ + i2c_del_driver(&ucd9000_driver); +} + +MODULE_AUTHOR("Guenter Roeck"); +MODULE_DESCRIPTION("PMBus driver for TI UCD90xxx"); +MODULE_LICENSE("GPL"); +module_init(ucd9000_init); +module_exit(ucd9000_exit);