From: Thomas Petazzoni Date: Fri, 21 Dec 2012 14:49:18 +0000 (+0100) Subject: arm: mvebu: enable mwifiex driver in mvebu_defconfig X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0c8cb1d4ae7d1a96be6a0bef18e7f44d88a18fdf;p=linux-beck.git arm: mvebu: enable mwifiex driver in mvebu_defconfig The Globalscale Mirabox platform, based on the Armada 370 from Marvell, has a SD8787 Wireless chip connected on the SDIO interface. Now that the mvsdio has a Device Tree binding, and the necessary Device Tree informations have been added at the SoC and board level, let's enable the mwifiex driver for the Wireless part of the SD8787 chip. For now, the driver gets probed correctly, detects a device and shows the network interfaces. However, scanning Wifi networks doesn't work for now, with a 'CMD_RESP: cmd 0x6 error, result=0x1' message. This will have to be investigated separately. Signed-off-by: Thomas Petazzoni Signed-off-by: Jason Cooper --- diff --git a/arch/arm/configs/mvebu_defconfig b/arch/arm/configs/mvebu_defconfig index f69a7159f787..6243175e845a 100644 --- a/arch/arm/configs/mvebu_defconfig +++ b/arch/arm/configs/mvebu_defconfig @@ -24,6 +24,7 @@ CONFIG_ARM_APPENDED_DTB=y CONFIG_VFP=y CONFIG_NET=y CONFIG_INET=y +CONFIG_CFG80211=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_BLK_DEV_SD=y CONFIG_ATA=y @@ -31,6 +32,8 @@ CONFIG_SATA_MV=y CONFIG_NETDEVICES=y CONFIG_MVNETA=y CONFIG_MARVELL_PHY=y +CONFIG_MWIFIEX=y +CONFIG_MWIFIEX_SDIO=y CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y CONFIG_I2C=y