From: Randy Dunlap Date: Sun, 5 Apr 2009 22:55:22 +0000 (-0700) Subject: docs: alphabetize entries in kernel-parameters.txt X-Git-Tag: v2.6.30-rc1~178 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0cb55ad2ad55;p=karo-tx-linux.git docs: alphabetize entries in kernel-parameters.txt Move entries to be in alpha order as specified near the beginning of this file. Clean up some whitespace and line-length miscues. Add '=' to "selinux" option syntax. Signed-off-by: Randy Dunlap Signed-off-by: Linus Torvalds --- diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 2895ce29dea5..6172e4360f60 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -153,60 +153,6 @@ and is between 256 and 4096 characters. It is defined in the file 1,0: use 1st APIC table default: 0 - acpi_sleep= [HW,ACPI] Sleep options - Format: { s3_bios, s3_mode, s3_beep, s4_nohwsig, - old_ordering, s4_nonvs } - See Documentation/power/video.txt for information on - s3_bios and s3_mode. - s3_beep is for debugging; it makes the PC's speaker beep - as soon as the kernel's real-mode entry point is called. - s4_nohwsig prevents ACPI hardware signature from being - used during resume from hibernation. - old_ordering causes the ACPI 1.0 ordering of the _PTS - control method, with respect to putting devices into - low power states, to be enforced (the ACPI 2.0 ordering - of _PTS is used by default). - s4_nonvs prevents the kernel from saving/restoring the - ACPI NVS memory during hibernation. - - acpi_sci= [HW,ACPI] ACPI System Control Interrupt trigger mode - Format: { level | edge | high | low } - - acpi_irq_balance [HW,ACPI] - ACPI will balance active IRQs - default in APIC mode - - acpi_irq_nobalance [HW,ACPI] - ACPI will not move active IRQs (default) - default in PIC mode - - acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for - use by PCI - Format: ,... - - acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA - Format: ,... - - acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT - - acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS - Format: To spoof as Windows 98: ="Microsoft Windows" - - acpi_osi= [HW,ACPI] Modify list of supported OS interface strings - acpi_osi="string1" # add string1 -- only one string - acpi_osi="!string2" # remove built-in string2 - acpi_osi= # disable all strings - - acpi_serialize [HW,ACPI] force serialization of AML methods - - acpi_skip_timer_override [HW,ACPI] - Recognize and ignore IRQ0/pin2 Interrupt Override. - For broken nForce2 BIOS resulting in XT-PIC timer. - acpi_use_timer_override [HW,ACPI] - Use timer override. For some broken Nvidia NF5 boards - that require a timer override, but don't have - HPET - acpi_backlight= [HW,ACPI] acpi_backlight=vendor acpi_backlight=video @@ -214,11 +160,6 @@ and is between 256 and 4096 characters. It is defined in the file (e.g. thinkpad_acpi, sony_acpi, etc.) instead of the ACPI video.ko driver. - acpi_display_output= [HW,ACPI] - acpi_display_output=vendor - acpi_display_output=video - See above. - acpi.debug_layer= [HW,ACPI,ACPI_DEBUG] acpi.debug_level= [HW,ACPI,ACPI_DEBUG] Format: @@ -247,6 +188,41 @@ and is between 256 and 4096 characters. It is defined in the file unusable. The "log_buf_len" parameter may be useful if you need to capture more output. + acpi_display_output= [HW,ACPI] + acpi_display_output=vendor + acpi_display_output=video + See above. + + acpi_irq_balance [HW,ACPI] + ACPI will balance active IRQs + default in APIC mode + + acpi_irq_nobalance [HW,ACPI] + ACPI will not move active IRQs (default) + default in PIC mode + + acpi_irq_isa= [HW,ACPI] If irq_balance, mark listed IRQs used by ISA + Format: ,... + + acpi_irq_pci= [HW,ACPI] If irq_balance, clear listed IRQs for + use by PCI + Format: ,... + + acpi_no_auto_ssdt [HW,ACPI] Disable automatic loading of SSDT + + acpi_os_name= [HW,ACPI] Tell ACPI BIOS the name of the OS + Format: To spoof as Windows 98: ="Microsoft Windows" + + acpi_osi= [HW,ACPI] Modify list of supported OS interface strings + acpi_osi="string1" # add string1 -- only one string + acpi_osi="!string2" # remove built-in string2 + acpi_osi= # disable all strings + + acpi_pm_good [X86-32,X86-64] + Override the pmtimer bug detection: force the kernel + to assume that this machine's pmtimer latches its value + and always returns good values. + acpi.power_nocheck= [HW,ACPI] Format: 1/0 enable/disable the check of power state. On some bogus BIOS the _PSC object/_STA object of @@ -255,11 +231,6 @@ and is between 256 and 4096 characters. It is defined in the file power state again in power transition. 1 : disable the power state check - acpi_pm_good [X86-32,X86-64] - Override the pmtimer bug detection: force the kernel - to assume that this machine's pmtimer latches its value - and always returns good values. - acpi_enforce_resources= [ACPI] { strict | lax | no } Check for resource conflicts between native drivers @@ -276,22 +247,6 @@ and is between 256 and 4096 characters. It is defined in the file no: ACPI OperationRegions are not marked as reserved, no further checks are performed. - agp= [AGP] - { off | try_unsupported } - off: disable AGP support - try_unsupported: try to drive unsupported chipsets - (may crash computer or cause data corruption) - - enable_timer_pin_1 [i386,x86-64] - Enable PIN 1 of APIC timer - Can be useful to work around chipset bugs - (in particular on some ATI chipsets). - The kernel tries to set a reasonable default. - - disable_timer_pin_1 [i386,x86-64] - Disable PIN 1 of APIC timer - Can be useful to work around chipset bugs. - ad1848= [HW,OSS] Format: ,,,, @@ -305,6 +260,12 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,,, See also header of sound/oss/aedsp16.c. + agp= [AGP] + { off | try_unsupported } + off: disable AGP support + try_unsupported: try to drive unsupported chipsets + (may crash computer or cause data corruption) + aha152x= [HW,SCSI] See Documentation/scsi/aha152x.txt. @@ -432,12 +393,6 @@ and is between 256 and 4096 characters. It is defined in the file possible to determine what the correct size should be. This option provides an override for these situations. - security= [SECURITY] Choose a security module to enable at boot. - If this boot parameter is not specified, only the first - security module asking for security registration will be - loaded. An invalid security module name will be treated - as if no module has been chosen. - capability.disable= [SECURITY] Disable capabilities. This would normally be used only if an alternative security model is to be @@ -509,24 +464,6 @@ and is between 256 and 4096 characters. It is defined in the file Range: 0 - 8192 Default: 64 - dma_debug=off If the kernel is compiled with DMA_API_DEBUG support - this option disables the debugging code at boot. - - dma_debug_entries= - This option allows to tune the number of preallocated - entries for DMA-API debugging code. One entry is - required per DMA-API allocation. Use this if the - DMA-API debugging code disables itself because the - architectural default is too low. - - hpet= [X86-32,HPET] option to control HPET usage - Format: { enable (default) | disable | force | - verbose } - disable: disable HPET and use PIT instead - force: allow force enabled of undocumented chips (ICH4, - VIA, nVidia) - verbose: show contents of HPET registers during setup - com20020= [HW,NET] ARCnet - COM20020 chipset Format: [,[,[,[,[,]]]]] @@ -570,23 +507,6 @@ and is between 256 and 4096 characters. It is defined in the file console=brl,ttyS0 For now, only VisioBraille is supported. - earlycon= [KNL] Output early console device and options. - uart[8250],io,[,options] - uart[8250],mmio,[,options] - Start an early, polled-mode console on the 8250/16550 - UART at the specified I/O port or MMIO address. - The options are the same as for ttyS, above. - - no_console_suspend - [HW] Never suspend the console - Disable suspending of consoles during suspend and - hibernate operations. Once disabled, debugging - messages can reach various consoles while the rest - of the system is being put to sleep (ie, while - debugging driver suspend/resume hooks). This may - not work reliably with all consoles, but is known - to work with serial and VGA consoles. - coredump_filter= [KNL] Change the default value for /proc//coredump_filter. @@ -643,30 +563,13 @@ and is between 256 and 4096 characters. It is defined in the file Format: [,] See also Documentation/networking/decnet.txt. - vt.default_blu= [VT] - Format: ,,,..., - Change the default blue palette of the console. - This is a 16-member array composed of values - ranging from 0-255. - - vt.default_grn= [VT] - Format: ,,,..., - Change the default green palette of the console. - This is a 16-member array composed of values - ranging from 0-255. - - vt.default_red= [VT] - Format: ,,,..., - Change the default red palette of the console. - This is a 16-member array composed of values - ranging from 0-255. - - vt.default_utf8= - [VT] - Format=<0|1> - Set system-wide default UTF-8 mode for all tty's. - Default is 1, i.e. UTF-8 mode is enabled for all - newly opened terminals. + default_hugepagesz= + [same as hugepagesz=] The size of the default + HugeTLB page size. This is the size represented by + the legacy /proc/ hugepages APIs, used for SHM, and + default size when mounting hugetlbfs filesystems. + Defaults to the default architecture's huge page size + if not specified. dhash_entries= [KNL] Set number of hash buckets for dentry cache. @@ -679,27 +582,9 @@ and is between 256 and 4096 characters. It is defined in the file Documentation/serial/digiepca.txt. disable_mtrr_cleanup [X86] - enable_mtrr_cleanup [X86] The kernel tries to adjust MTRR layout from continuous to discrete, to make X server driver able to add WB - entry later. This parameter enables/disables that. - - mtrr_chunk_size=nn[KMG] [X86] - used for mtrr cleanup. It is largest continous chunk - that could hold holes aka. UC entries. - - mtrr_gran_size=nn[KMG] [X86] - Used for mtrr cleanup. It is granularity of mtrr block. - Default is 1. - Large value could prevent small alignment from - using up MTRRs. - - mtrr_spare_reg_nr=n [X86] - Format: - Range: 0,7 : spare reg number - Default : 1 - Used for mtrr cleanup. It is spare mtrr entries number. - Set to 2 or more if your graphical card needs more. + entry later. This parameter disables that. disable_mtrr_trim [X86, Intel and AMD only] By default the kernel will trim any uncacheable @@ -707,12 +592,38 @@ and is between 256 and 4096 characters. It is defined in the file MTRR settings. This parameter disables that behavior, possibly causing your machine to run very slowly. + disable_timer_pin_1 [i386,x86-64] + Disable PIN 1 of APIC timer + Can be useful to work around chipset bugs. + dmasound= [HW,OSS] Sound subsystem buffers + dma_debug=off If the kernel is compiled with DMA_API_DEBUG support, + this option disables the debugging code at boot. + + dma_debug_entries= + This option allows to tune the number of preallocated + entries for DMA-API debugging code. One entry is + required per DMA-API allocation. Use this if the + DMA-API debugging code disables itself because the + architectural default is too low. + dscc4.setup= [NET] dtc3181e= [HW,SCSI] + dynamic_printk Enables pr_debug()/dev_dbg() calls if + CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled. + These can also be switched on/off via + /dynamic_printk/modules + + earlycon= [KNL] Output early console device and options. + uart[8250],io,[,options] + uart[8250],mmio,[,options] + Start an early, polled-mode console on the 8250/16550 + UART at the specified I/O port or MMIO address. + The options are the same as for ttyS, above. + earlyprintk= [X86-32,X86-64,SH,BLACKFIN] earlyprintk=vga earlyprintk=serial[,ttySn[,baudrate]] @@ -754,6 +665,17 @@ and is between 256 and 4096 characters. It is defined in the file pass this option to capture kernel. See Documentation/kdump/kdump.txt for details. + enable_mtrr_cleanup [X86] + The kernel tries to adjust MTRR layout from continuous + to discrete, to make X server driver able to add WB + entry later. This parameter enables that. + + enable_timer_pin_1 [i386,x86-64] + Enable PIN 1 of APIC timer + Can be useful to work around chipset bugs + (in particular on some ATI chipsets). + The kernel tries to set a reasonable default. + enforcing [SELINUX] Set initial enforcing status. Format: {"0" | "1"} See security/selinux/Kconfig help text. @@ -841,6 +763,16 @@ and is between 256 and 4096 characters. It is defined in the file hisax= [HW,ISDN] See Documentation/isdn/README.HiSax. + hlt [BUGS=ARM,SH] + + hpet= [X86-32,HPET] option to control HPET usage + Format: { enable (default) | disable | force | + verbose } + disable: disable HPET and use PIT instead + force: allow force enabled of undocumented chips (ICH4, + VIA, nVidia) + verbose: show contents of HPET registers during setup + hugepages= [HW,X86-32,IA-64] HugeTLB pages to allocate at boot. hugepagesz= [HW,IA-64,PPC,X86-64] The size of the HugeTLB pages. On x86-64 and powerpc, this option can be specified @@ -850,15 +782,6 @@ and is between 256 and 4096 characters. It is defined in the file (when the CPU supports the "pdpe1gb" cpuinfo flag) Note that 1GB pages can only be allocated at boot time using hugepages= and not freed afterwards. - default_hugepagesz= - [same as hugepagesz=] The size of the default - HugeTLB page size. This is the size represented by - the legacy /proc/ hugepages APIs, used for SHM, and - default size when mounting hugetlbfs filesystems. - Defaults to the default architecture's huge page size - if not specified. - - hlt [BUGS=ARM,SH] hvc_iucv= [S390] Number of z/VM IUCV hypervisor console (HVC) terminal devices. Valid values: 0..8 @@ -919,6 +842,9 @@ and is between 256 and 4096 characters. It is defined in the file idebus= [HW] (E)IDE subsystem - VLB/PCI bus speed See Documentation/ide/ide.txt. + ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem + Claim all unknown PCI IDE storage controllers. + idle= [X86] Format: idle=poll, idle=mwait, idle=halt, idle=nomwait Poll forces a polling idle loop that can slightly @@ -934,9 +860,6 @@ and is between 256 and 4096 characters. It is defined in the file In such case C2/C3 won't be used again. idle=nomwait: Disable mwait for CPU C-states - ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem - Claim all unknown PCI IDE storage controllers. - ignore_loglevel [KNL] Ignore loglevel setting - this will print /all/ kernel messages to the console. Useful for debugging. @@ -970,25 +893,6 @@ and is between 256 and 4096 characters. It is defined in the file inport.irq= [HW] Inport (ATI XL and Microsoft) busmouse driver Format: - inttest= [IA64] - - iomem= Disable strict checking of access to MMIO memory - strict regions from userspace. - relaxed - - iommu= [x86] - off - force - noforce - biomerge - panic - nopanic - merge - nomerge - forcesac - soft - - intel_iommu= [DMAR] Intel IOMMU driver (DMAR) option on Enable intel iommu driver. @@ -1012,6 +916,28 @@ and is between 256 and 4096 characters. It is defined in the file result in a hardware IOTLB flush operation as opposed to batching them for performance. + inttest= [IA64] + + iomem= Disable strict checking of access to MMIO memory + strict regions from userspace. + relaxed + + iommu= [x86] + off + force + noforce + biomerge + panic + nopanic + merge + nomerge + forcesac + soft + + io7= [HW] IO7 for Marvel based alpha systems + See comment before marvel_specify_io7 in + arch/alpha/kernel/core_marvel.c. + io_delay= [X86-32,X86-64] I/O delay method 0x80 Standard port 0x80 based delay @@ -1022,10 +948,6 @@ and is between 256 and 4096 characters. It is defined in the file none No delay - io7= [HW] IO7 for Marvel based alpha systems - See comment before marvel_specify_io7 in - arch/alpha/kernel/core_marvel.c. - ip= [IP_PNP] See Documentation/filesystems/nfsroot.txt. @@ -1036,12 +958,6 @@ and is between 256 and 4096 characters. It is defined in the file ips= [HW,SCSI] Adaptec / IBM ServeRAID controller See header of drivers/scsi/ips.c. - ports= [IP_VS_FTP] IPVS ftp helper module - Default is 21. - Up to 8 (IP_VS_APP_MAX_PORTS) ports - may be specified. - Format: ,.... - irqfixup [HW] When an interrupt is not handled search all handlers for it. Intended to get systems with badly broken @@ -1082,6 +998,8 @@ and is between 256 and 4096 characters. It is defined in the file js= [HW,JOY] Analog joystick See Documentation/input/joystick.txt. + keepinitrd [HW,ARM] + kernelcore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter specifies the amount of memory usable by the kernel for non-movable allocations. The requested amount is @@ -1107,21 +1025,6 @@ and is between 256 and 4096 characters. It is defined in the file higher than default (KMEMTRACE_N_SUBBUFS in code) if you experience buffer overruns. - movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter - is similar to kernelcore except it specifies the - amount of memory used for migratable allocations. - If both kernelcore and movablecore is specified, - then kernelcore will be at *least* the specified - value but may be more. If movablecore on its own - is specified, the administrator must be careful - that the amount of memory usable for all allocations - is not too small. - - keepinitrd [HW,ARM] - - kstack=N [X86-32,X86-64] Print N words from the kernel stack - in oops dumps. - kgdboc= [HW] kgdb over consoles. Requires a tty driver that supports console polling. (only serial suported for now) @@ -1131,6 +1034,9 @@ and is between 256 and 4096 characters. It is defined in the file Configure the RouterBoard 532 series on-chip Ethernet adapter MAC address. + kstack=N [X86-32,X86-64] Print N words from the kernel stack + in oops dumps. + l2cr= [PPC] l3cr= [PPC] @@ -1276,9 +1182,8 @@ and is between 256 and 4096 characters. It is defined in the file (machvec) in a generic kernel. Example: machvec=hpzx1_swiotlb - max_loop= [LOOP] Maximum number of loopback devices that can - be mounted - Format: <1-256> + max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater + than or equal to this physical address is ignored. maxcpus= [SMP] Maximum number of processors that an SMP kernel should make use of. maxcpus=n : n >= 0 limits the @@ -1286,8 +1191,9 @@ and is between 256 and 4096 characters. It is defined in the file it is equivalent to "nosmp", which also disables the IO APIC. - max_addr=nn[KMG] [KNL,BOOT,ia64] All physical memory greater than - or equal to this physical address is ignored. + max_loop= [LOOP] Maximum number of loopback devices that can + be mounted + Format: <1-256> max_luns= [SCSI] Maximum number of LUNs to probe. Should be between 1 and 2^32-1. @@ -1414,6 +1320,16 @@ and is between 256 and 4096 characters. It is defined in the file mousedev.yres= [MOUSE] Vertical screen resolution, used for devices reporting absolute coordinates, such as tablets + movablecore=nn[KMG] [KNL,X86-32,IA-64,PPC,X86-64] This parameter + is similar to kernelcore except it specifies the + amount of memory used for migratable allocations. + If both kernelcore and movablecore is specified, + then kernelcore will be at *least* the specified + value but may be more. If movablecore on its own + is specified, the administrator must be careful + that the amount of memory usable for all allocations + is not too small. + mpu401= [HW,OSS] Format: , @@ -1435,6 +1351,23 @@ and is between 256 and 4096 characters. It is defined in the file [HW] Make the MicroTouch USB driver use raw coordinates ('y', default) or cooked coordinates ('n') + mtrr_chunk_size=nn[KMG] [X86] + used for mtrr cleanup. It is largest continous chunk + that could hold holes aka. UC entries. + + mtrr_gran_size=nn[KMG] [X86] + Used for mtrr cleanup. It is granularity of mtrr block. + Default is 1. + Large value could prevent small alignment from + using up MTRRs. + + mtrr_spare_reg_nr=n [X86] + Format: + Range: 0,7 : spare reg number + Default : 1 + Used for mtrr cleanup. It is spare mtrr entries number. + Set to 2 or more if your graphical card needs more. + n2= [NET] SDL Inc. RISCom/N2 synchronous serial card NCR_D700= [HW,SCSI] @@ -1495,11 +1428,13 @@ and is between 256 and 4096 characters. It is defined in the file 0 - turn nmi_watchdog off 1 - use the IO-APIC timer for the NMI watchdog 2 - use the local APIC for the NMI watchdog using - a performance counter. Note: This will use one performance - counter and the local APIC's performance vector. - When panic is specified panic when an NMI watchdog timeout occurs. - This is useful when you use a panic=... timeout and need the box - quickly up again. + a performance counter. Note: This will use one + performance counter and the local APIC's performance + vector. + When panic is specified, panic when an NMI watchdog + timeout occurs. + This is useful when you use a panic=... timeout and + need the box quickly up again. Instead of 1 and 2 it is possible to use the following symbolic names: lapic and ioapic Example: nmi_watchdog=2 or nmi_watchdog=panic,lapic @@ -1508,6 +1443,16 @@ and is between 256 and 4096 characters. It is defined in the file emulation library even if a 387 maths coprocessor is present. + no_console_suspend + [HW] Never suspend the console + Disable suspending of consoles during suspend and + hibernate operations. Once disabled, debugging + messages can reach various consoles while the rest + of the system is being put to sleep (ie, while + debugging driver suspend/resume hooks). This may + not work reliably with all consoles, but is known + to work with serial and VGA consoles. + noaliencache [MM, NUMA, SLAB] Disables the allocation of alien caches in the slab allocator. Saves per-node memory, but will impact performance. @@ -1522,6 +1467,8 @@ and is between 256 and 4096 characters. It is defined in the file nocache [ARM] + noclflush [BUGS=X86] Don't use the CLFLUSH instruction + nodelayacct [KNL] Disable per-task delay accounting nodisconnect [HW,SCSI,M68K] Disables SCSI disconnects. @@ -1550,8 +1497,6 @@ and is between 256 and 4096 characters. It is defined in the file register save and restore. The kernel will only save legacy floating-point registers on task switch. - noclflush [BUGS=X86] Don't use the CLFLUSH instruction - nohlt [BUGS=ARM,SH] Tells the kernel that the sleep(SH) or wfi(ARM) instruction doesn't work correctly and not to use it. This is also useful when using JTAG debugger. @@ -1596,12 +1541,6 @@ and is between 256 and 4096 characters. It is defined in the file nolapic_timer [X86-32,APIC] Do not use the local APIC timer. - nox2apic [X86-64,APIC] Do not enable x2APIC mode. - - x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of - default x2apic cluster mode on platforms - supporting x2apic. - noltlbs [PPC] Do not use large page/tlb entries for kernel lowmem mapping on PPC40x. @@ -1612,6 +1551,9 @@ and is between 256 and 4096 characters. It is defined in the file nomfgpt [X86-32] Disable Multi-Function General Purpose Timer usage (for AMD Geode machines). + norandmaps Don't use address space randomization. Equivalent to + echo 0 > /proc/sys/kernel/randomize_va_space + noreplace-paravirt [X86-32,PV_OPS] Don't patch paravirt_ops noreplace-smp [X86-32,SMP] Don't replace SMP instructions @@ -1650,13 +1592,13 @@ and is between 256 and 4096 characters. It is defined in the file purges which is reported from either PAL_VM_SUMMARY or SAL PALO. + nr_uarts= [SERIAL] maximum number of UARTs to be registered. + numa_zonelist_order= [KNL, BOOT] Select zonelist order for NUMA. one of ['zone', 'node', 'default'] can be specified This can be set from sysctl after boot. See Documentation/sysctl/vm.txt for details. - nr_uarts= [SERIAL] maximum number of UARTs to be registered. - ohci1394_dma=early [HW] enable debugging via the ohci1394 driver. See Documentation/debugging-via-ohci1394.txt for more info. @@ -1905,6 +1847,14 @@ and is between 256 and 4096 characters. It is defined in the file printk.time= Show timing data prefixed to each printk message line Format: (1/Y/y=enable, 0/N/n=disable) + processor.max_cstate= [HW,ACPI] + Limit processor to maximum C-state + max_cstate=9 overrides any DMI blacklist limit. + + processor.nocst [HW,ACPI] + Ignore the _CST method to determine C-states, + instead using the legacy FADT method + profile= [KNL] Enable kernel profiling via /proc/profile Format: [schedule,] Param: "schedule" - profile schedule points. @@ -1914,14 +1864,6 @@ and is between 256 and 4096 characters. It is defined in the file Requires CONFIG_SCHEDSTATS Param: "kvm" - profile VM exits. - processor.max_cstate= [HW,ACPI] - Limit processor to maximum C-state - max_cstate=9 overrides any DMI blacklist limit. - - processor.nocst [HW,ACPI] - Ignore the _CST method to determine C-states, - instead using the legacy FADT method - prompt_ramdisk= [RAM] List of RAM disks to prompt for floppy disk before loading. See Documentation/blockdev/ramdisk.txt. @@ -2075,7 +2017,13 @@ and is between 256 and 4096 characters. It is defined in the file allowing boot to proceed. none ignores them, expecting user space to do the scan. - selinux [SELINUX] Disable or enable SELinux at boot time. + security= [SECURITY] Choose a security module to enable at boot. + If this boot parameter is not specified, only the first + security module asking for security registration will be + loaded. An invalid security module name will be treated + as if no module has been chosen. + + selinux= [SELINUX] Disable or enable SELinux at boot time. Format: { "0" | "1" } See security/selinux/Kconfig help text. 0 -- disable. @@ -2499,9 +2447,6 @@ and is between 256 and 4096 characters. It is defined in the file medium is write-protected). Example: quirks=0419:aaf5:rl,0421:0433:rc - add_efi_memmap [EFI; x86-32,X86-64] Include EFI memory map in - kernel's map of available physical RAM. - vdso= [X86-32,SH,x86-64] vdso=2: enable compat VDSO (default with COMPAT_VDSO) vdso=1: enable VDSO (default) @@ -2540,6 +2485,31 @@ and is between 256 and 4096 characters. It is defined in the file vmpoff= [KNL,S390] Perform z/VM CP command after power off. Format: + vt.default_blu= [VT] + Format: ,,,..., + Change the default blue palette of the console. + This is a 16-member array composed of values + ranging from 0-255. + + vt.default_grn= [VT] + Format: ,,,..., + Change the default green palette of the console. + This is a 16-member array composed of values + ranging from 0-255. + + vt.default_red= [VT] + Format: ,,,..., + Change the default red palette of the console. + This is a 16-member array composed of values + ranging from 0-255. + + vt.default_utf8= + [VT] + Format=<0|1> + Set system-wide default UTF-8 mode for all tty's. + Default is 1, i.e. UTF-8 mode is enabled for all + newly opened terminals. + waveartist= [HW,OSS] Format: ,,, @@ -2552,6 +2522,10 @@ and is between 256 and 4096 characters. It is defined in the file wdt= [WDT] Watchdog See Documentation/watchdog/wdt.txt. + x2apic_phys [X86-64,APIC] Use x2apic physical mode instead of + default x2apic cluster mode on platforms + supporting x2apic. + xd= [HW,XT] Original XT pre-IDE (RLL encoded) disks. xd_geo= See header of drivers/block/xd.c. @@ -2559,9 +2533,6 @@ and is between 256 and 4096 characters. It is defined in the file Format: ,,,,,[,[,[,]]] - norandmaps Don't use address space randomization. Equivalent to - echo 0 > /proc/sys/kernel/randomize_va_space - ______________________________________________________________________ TODO: