From: Marc Kleine-Budde Date: Fri, 27 Sep 2013 10:15:05 +0000 (+0200) Subject: can: flexcan: fix flexcan_chip_start() on imx6 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0d1862e;p=linux-beck.git can: flexcan: fix flexcan_chip_start() on imx6 In the flexcan_chip_start() function first the flexcan core is going through the soft reset sequence, then the RX FIFO is enabled. With the hardware is put into FIFO mode, message buffers 1...7 are reserved by the FIFO engine. The remaining message buffers are in reset default values. This patch removes the bogus initialization of the message buffers, as it causes an imprecise external abort on imx6. Cc: linux-stable Reported-by: Lothar Waßmann Tested-by: Lothar Waßmann Signed-off-by: Marc Kleine-Budde --- diff --git a/drivers/net/can/flexcan.c b/drivers/net/can/flexcan.c index 71c677e651d7..3f21142138b7 100644 --- a/drivers/net/can/flexcan.c +++ b/drivers/net/can/flexcan.c @@ -702,7 +702,6 @@ static int flexcan_chip_start(struct net_device *dev) { struct flexcan_priv *priv = netdev_priv(dev); struct flexcan_regs __iomem *regs = priv->base; - unsigned int i; int err; u32 reg_mcr, reg_ctrl; @@ -772,17 +771,6 @@ static int flexcan_chip_start(struct net_device *dev) netdev_dbg(dev, "%s: writing ctrl=0x%08x", __func__, reg_ctrl); flexcan_write(reg_ctrl, ®s->ctrl); - for (i = 0; i < ARRAY_SIZE(regs->cantxfg); i++) { - flexcan_write(0, ®s->cantxfg[i].can_ctrl); - flexcan_write(0, ®s->cantxfg[i].can_id); - flexcan_write(0, ®s->cantxfg[i].data[0]); - flexcan_write(0, ®s->cantxfg[i].data[1]); - - /* put MB into rx queue */ - flexcan_write(FLEXCAN_MB_CNT_CODE(0x4), - ®s->cantxfg[i].can_ctrl); - } - /* acceptance mask/acceptance code (accept everything) */ flexcan_write(0x0, ®s->rxgmask); flexcan_write(0x0, ®s->rx14mask);