From: Chen-Yu Tsai Date: Mon, 30 Jun 2014 16:04:59 +0000 (+0800) Subject: pinctrl: sunxi: Fix multi bank interrupt support in gpio_to_irq X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0d3bafac658de2f8e267df805a61e597449699b5;p=linux-beck.git pinctrl: sunxi: Fix multi bank interrupt support in gpio_to_irq When mapping the interrupts, the gpio_to_irq function did not consider the bank number of the gpio pin in question, only the offset or the interrupt number in the bank. As a result, requests for interrupts in the later banks get mapped to the first bank. This issue was discovered while enabling mmc on the new sun8i platform. The tablet I have uses a pin/interrupt from the second bank to do mmc card detection. Tested on this very device with register inspection and actual mmc card insertion/removal. Signed-off-by: Chen-Yu Tsai Acked-by: Maxime Ripard Signed-off-by: Linus Walleij --- diff --git a/drivers/pinctrl/sunxi/pinctrl-sunxi.c b/drivers/pinctrl/sunxi/pinctrl-sunxi.c index c641566c6efd..47f5e1bc50d0 100644 --- a/drivers/pinctrl/sunxi/pinctrl-sunxi.c +++ b/drivers/pinctrl/sunxi/pinctrl-sunxi.c @@ -520,6 +520,7 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset) { struct sunxi_pinctrl *pctl = dev_get_drvdata(chip->dev); struct sunxi_desc_function *desc; + unsigned irqnum; if (offset >= chip->ngpio) return -ENXIO; @@ -528,10 +529,12 @@ static int sunxi_pinctrl_gpio_to_irq(struct gpio_chip *chip, unsigned offset) if (!desc) return -EINVAL; + irqnum = desc->irqbank * IRQ_PER_BANK + desc->irqnum; + dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n", - chip->label, offset + chip->base, desc->irqnum); + chip->label, offset + chip->base, irqnum); - return irq_find_mapping(pctl->domain, desc->irqnum); + return irq_find_mapping(pctl->domain, irqnum); } static int sunxi_pinctrl_irq_request_resources(struct irq_data *d)