From: Webb Scales Date: Thu, 23 Apr 2015 14:31:55 +0000 (-0500) Subject: hpsa: clean up host, channel, target, lun prints X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0d96ef5ff4086a4143eacb036cf28affd1db0cab;p=linux-beck.git hpsa: clean up host, channel, target, lun prints We had a mix of formats used for specifying controller, bus, target, and lun address of devices. change to the format used by the scsi midlayer and upper layer (2:3:0:0) so you can easily follow the information from hpsa to scsi midlayer to sd upper layer. Also add this information: - product ID - vendor ID - RAID level - SSD Smath Path capable and enabled - exposure level (sg-only) Example: hpsa 0000:04:00.0: added scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME RAID-0 SSDSmartPathCap+ En+ Exp=4 scsi 2:0:0:0: Direct-Access HP LOGICAL VOLUME 10.0 PQ: 0 ANSI: 5 sd 2:0:0:0: [sdr] 12501713072 512-byte logical blocks: (6.40 TB/5.82 TiB) sd 2:0:0:0: [sdr] 4096-byte physical blocks sd 2:0:0:0: [sdr] Attached SCSI disk sd 2:0:0:0: Attached scsi generic sg20 type 0 Reviewed-by: Scott Teel Reviewed-by: Kevin Barnett Reviewed-by: Tomas Henzl Reviewed-by: Hannes Reinecke Signed-off-by: Robert Elliott Signed-off-by: Don Brace Reviewed-by: Christoph Hellwig Signed-off-by: James Bottomley --- diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index 82390ad8b1a2..535505d5ece4 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -886,6 +886,23 @@ static int hpsa_find_target_lun(struct ctlr_info *h, return !found; } +static inline void hpsa_show_dev_msg(const char *level, struct ctlr_info *h, + struct hpsa_scsi_dev_t *dev, char *description) +{ + dev_printk(level, &h->pdev->dev, + "scsi %d:%d:%d:%d: %s %s %.8s %.16s RAID-%s SSDSmartPathCap%c En%c Exp=%d\n", + h->scsi_host->host_no, dev->bus, dev->target, dev->lun, + description, + scsi_device_type(dev->devtype), + dev->vendor, + dev->model, + dev->raid_level > RAID_UNKNOWN ? + "RAID-?" : raid_label[dev->raid_level], + dev->offload_config ? '+' : '-', + dev->offload_enabled ? '+' : '-', + dev->expose_state); +} + /* Add an entry into h->dev[] array. */ static int hpsa_scsi_add_entry(struct ctlr_info *h, int hostno, struct hpsa_scsi_dev_t *device, @@ -955,15 +972,8 @@ lun_assigned: device->offload_enabled = 0; added[*nadded] = device; (*nadded)++; - - /* initially, (before registering with scsi layer) we don't - * know our hostno and we don't want to print anything first - * time anyway (the scsi layer's inquiries will show that info) - */ - /* if (hostno != -1) */ - dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d added.\n", - scsi_device_type(device->devtype), hostno, - device->bus, device->target, device->lun); + hpsa_show_dev_msg(KERN_INFO, h, device, + device->expose_state & HPSA_SCSI_ADD ? "added" : "masked"); return 0; } @@ -1003,6 +1013,7 @@ static void hpsa_scsi_update_entry(struct ctlr_info *h, int hostno, if (!new_entry->offload_enabled) h->dev[entry]->offload_enabled = 0; + hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated"); } /* Replace an entry from h->dev[] array. */ @@ -1030,9 +1041,7 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, h->dev[entry] = new_entry; added[*nadded] = new_entry; (*nadded)++; - dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d changed.\n", - scsi_device_type(new_entry->devtype), hostno, new_entry->bus, - new_entry->target, new_entry->lun); + hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced"); } /* Remove an entry from h->dev[] array. */ @@ -1052,9 +1061,7 @@ static void hpsa_scsi_remove_entry(struct ctlr_info *h, int hostno, int entry, for (i = entry; i < h->ndevices-1; i++) h->dev[i] = h->dev[i+1]; h->ndevices--; - dev_info(&h->pdev->dev, "%s device c%db%dt%dl%d removed.\n", - scsi_device_type(sd->devtype), hostno, sd->bus, sd->target, - sd->lun); + hpsa_show_dev_msg(KERN_INFO, h, sd, "removed"); } #define SCSI3ADDR_EQ(a, b) ( \ @@ -1435,9 +1442,7 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, */ if (sd[i]->volume_offline) { hpsa_show_volume_status(h, sd[i]); - dev_info(&h->pdev->dev, "c%db%dt%dl%d: temporarily offline\n", - h->scsi_host->host_no, - sd[i]->bus, sd[i]->target, sd[i]->lun); + hpsa_show_dev_msg(KERN_INFO, h, sd[i], "offline"); continue; } @@ -1501,10 +1506,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, * future cmds to this device will get selection * timeout as if the device was gone. */ - dev_warn(&h->pdev->dev, - "didn't find c%db%dt%dl%d for removal.\n", - hostno, removed[i]->bus, - removed[i]->target, removed[i]->lun); + hpsa_show_dev_msg(KERN_WARNING, h, removed[i], + "didn't find device for removal."); } } kfree(removed[i]); @@ -1518,9 +1521,8 @@ static void adjust_hpsa_scsi_table(struct ctlr_info *h, int hostno, if (scsi_add_device(sh, added[i]->bus, added[i]->target, added[i]->lun) == 0) continue; - dev_warn(&h->pdev->dev, "scsi_add_device c%db%dt%dl%d failed, " - "device not added.\n", hostno, added[i]->bus, - added[i]->target, added[i]->lun); + hpsa_show_dev_msg(KERN_WARNING, h, added[i], + "addition failed, device not added."); /* now we have to remove it from h->dev, * since it didn't get added to scsi mid layer */ @@ -4375,7 +4377,6 @@ static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd) if (rc == 0 && wait_for_device_to_become_ready(h, dev->scsi3addr) == 0) return SUCCESS; - dev_warn(&h->pdev->dev, "resetting device failed.\n"); return FAILED; } @@ -4491,8 +4492,9 @@ static int hpsa_send_reset_as_abort_ioaccel2(struct ctlr_info *h, if (h->raid_offload_debug > 0) dev_info(&h->pdev->dev, - "Reset as abort: Abort requested on C%d:B%d:T%d:L%d scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", + "scsi %d:%d:%d:%d %s scsi3addr 0x%02x%02x%02x%02x%02x%02x%02x%02x\n", h->scsi_host->host_no, dev->bus, dev->target, dev->lun, + "Reset as abort", scsi3addr[0], scsi3addr[1], scsi3addr[2], scsi3addr[3], scsi3addr[4], scsi3addr[5], scsi3addr[6], scsi3addr[7]); @@ -4594,9 +4596,10 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) return FAILED; memset(msg, 0, sizeof(msg)); - ml += sprintf(msg+ml, "ABORT REQUEST on C%d:B%d:T%d:L%llu ", + ml += sprintf(msg+ml, "scsi %d:%d:%d:%llu %s", h->scsi_host->host_no, sc->device->channel, - sc->device->id, sc->device->lun); + sc->device->id, sc->device->lun, + "Aborting command"); /* Find the device of the command to be aborted */ dev = sc->device->hostdata; @@ -4624,8 +4627,7 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) ml += sprintf(msg+ml, "Command:0x%x SN:0x%lx ", as->cmnd[0], as->serial_number); dev_dbg(&h->pdev->dev, "%s\n", msg); - dev_warn(&h->pdev->dev, "Abort request on C%d:B%d:T%d:L%d\n", - h->scsi_host->host_no, dev->bus, dev->target, dev->lun); + hpsa_show_dev_msg(KERN_WARNING, h, dev, "Aborting command"); /* * Command is in flight, or possibly already completed * by the firmware (but not to the scsi mid layer) but we can't @@ -4633,10 +4635,8 @@ static int hpsa_eh_abort_handler(struct scsi_cmnd *sc) */ rc = hpsa_send_abort_both_ways(h, dev->scsi3addr, abort); if (rc != 0) { - dev_dbg(&h->pdev->dev, "%s Request FAILED.\n", msg); - dev_warn(&h->pdev->dev, "FAILED abort on device C%d:B%d:T%d:L%d\n", - h->scsi_host->host_no, - dev->bus, dev->target, dev->lun); + hpsa_show_dev_msg(KERN_WARNING, h, dev, + "FAILED to abort command"); cmd_free(h, abort); return FAILED; }