From: Sarah Sharp Date: Thu, 21 Jun 2012 23:28:30 +0000 (-0700) Subject: xhci: Fix hang on back-to-back Set TR Deq Ptr commands. X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0d9f78a92ef5e97d9fe51d9215ebe22f6f0d289d;p=linux-beck.git xhci: Fix hang on back-to-back Set TR Deq Ptr commands. The Microsoft LifeChat 3000 USB headset was causing a very reproducible hang whenever it was plugged in. At first, I thought the host controller was producing bad transfer events, because the log was filled with errors like: xhci_hcd 0000:00:14.0: ERROR Transfer event TRB DMA ptr not part of current TD However, it turned out to be an xHCI driver bug in the ring expansion patches. The bug is triggered When there are two ring segments, and a TD that ends just before a link TRB, like so: ______________ _____________ | | ---> | setup TRB B | ______________ | _____________ | | | | data TRB B | ______________ | _____________ | setup TRB A | <-- deq | | data TRB B | ______________ | _____________ | data TRB A | | | | <-- enq, deq'' ______________ | _____________ | status TRB A | | | | ______________ | _____________ | link TRB |--------------- | link TRB | _____________ <--- deq' _____________ TD A (the first control transfer) stalls on the data phase. That halts the ring. The xHCI driver moves the hardware dequeue pointer to the first TRB after the stalled transfer, which happens to be the link TRB. Once the Set TR dequeue pointer command completes, the function update_ring_for_set_deq_completion runs. That function is supposed to update the xHCI driver's dequeue pointer to match the internal hardware dequeue pointer. On the first call this would work fine, and the software dequeue pointer would move to deq'. However, if the transfer immediately after that stalled (TD B in this case), another Set TR Dequeue command would be issued. That would move the hardware dequeue pointer to deq''. Once that command completed, update_ring_for_set_deq_completion would run again. The original code would unconditionally increment the software dequeue pointer, which moved the pointer off the ring segment into la-la-land. The while loop would happy increment the dequeue pointer (possibly wrapping it) until it matched the hardware pointer value. The while loop would also access all the memory in between the first ring segment and the second ring segment to determine if it was a link TRB. This could cause general protection faults, although it was unlikely because the ring segments came from a DMA pool, and would often have consecutive memory addresses. If nothing in that space looked like a link TRB, the deq_seg pointer for the ring would remain on the first segment. Thus, the deq_seg and the software dequeue pointer would get out of sync. When the next transfer event came in after the stalled transfer, the xHCI driver code would attempt to convert the software dequeue pointer into a DMA address in order to compare the DMA address for the completed transfer. Since the deq_seg and the dequeue pointer were out of sync, xhci_trb_virt_to_dma would return NULL. The transfer event would get ignored, the transfer would eventually timeout, and we would mistakenly convert the finished transfer to no-op TRBs. Some kernel driver (maybe xHCI?) would then get stuck in an infinite loop in interrupt context, and the whole machine would hang. This patch should be backported to kernels as old as 3.4, that contain the commit b008df60c6369ba0290fa7daa177375407a12e07 "xHCI: count free TRBs on transfer ring" Signed-off-by: Sarah Sharp Cc: Andiry Xu Cc: stable@vger.kernel.org --- diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 23b4aefd1036..8275645889da 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -885,6 +885,17 @@ static void update_ring_for_set_deq_completion(struct xhci_hcd *xhci, num_trbs_free_temp = ep_ring->num_trbs_free; dequeue_temp = ep_ring->dequeue; + /* If we get two back-to-back stalls, and the first stalled transfer + * ends just before a link TRB, the dequeue pointer will be left on + * the link TRB by the code in the while loop. So we have to update + * the dequeue pointer one segment further, or we'll jump off + * the segment into la-la-land. + */ + if (last_trb(xhci, ep_ring, ep_ring->deq_seg, ep_ring->dequeue)) { + ep_ring->deq_seg = ep_ring->deq_seg->next; + ep_ring->dequeue = ep_ring->deq_seg->trbs; + } + while (ep_ring->dequeue != dev->eps[ep_index].queued_deq_ptr) { /* We have more usable TRBs */ ep_ring->num_trbs_free++;