From: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Date: Fri, 2 Sep 2016 16:24:58 +0000 (+0300)
Subject: arm64: dts: h3ulcb: enable GPIO keys
X-Git-Tag: v4.9-rc1~74^2~5^2~7
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0e3886a981e062740fbb89670f79fd57caed8137;p=karo-tx-linux.git

arm64: dts: h3ulcb: enable GPIO keys

This supports GPIO keys on H3ULCB board

Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---

diff --git a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
index 234b66a9e163..adf2b0e44dac 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
+++ b/arch/arm64/boot/dts/renesas/r8a7795-h3ulcb.dts
@@ -12,6 +12,7 @@
 /dts-v1/;
 #include "r8a7795.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 
 / {
 	model = "Renesas H3ULCB board based on r8a7795";
@@ -31,6 +32,18 @@
 		/* first 128MB is reserved for secure area. */
 		reg = <0x0 0x48000000 0x0 0x38000000>;
 	};
+
+	keyboard {
+		compatible = "gpio-keys";
+
+		key-1 {
+			linux,code = <KEY_1>;
+			label = "SW3";
+			wakeup-source;
+			debounce-interval = <20>;
+			gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &extal_clk {