From: Marc Zyngier Date: Mon, 16 Nov 2015 19:13:26 +0000 (+0000) Subject: irqchip/gic: Make sure all interrupts are deactivated at boot X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0eece2b22849c90b730815c893425a36b9d10fd5;p=linux-beck.git irqchip/gic: Make sure all interrupts are deactivated at boot When booting a GIC/GICv3 based system, we have no idea what state the firmware (or previous kernel in the case of kexec) has left the GIC, and some interrupts may still be active. In order to garantee that we have a clean state, make sure the active bits are cleared at init time. Signed-off-by: Marc Zyngier Cc: Cc: Jason Cooper Cc: Russell King Link: http://lkml.kernel.org/r/1447701208-18150-3-git-send-email-marc.zyngier@arm.com Signed-off-by: Thomas Gleixner --- diff --git a/drivers/irqchip/irq-gic-common.c b/drivers/irqchip/irq-gic-common.c index 44a077f3a4a2..f174ce0ca361 100644 --- a/drivers/irqchip/irq-gic-common.c +++ b/drivers/irqchip/irq-gic-common.c @@ -84,12 +84,15 @@ void __init gic_dist_config(void __iomem *base, int gic_irqs, writel_relaxed(GICD_INT_DEF_PRI_X4, base + GIC_DIST_PRI + i); /* - * Disable all interrupts. Leave the PPI and SGIs alone - * as they are enabled by redistributor registers. + * Deactivate and disable all SPIs. Leave the PPI and SGIs + * alone as they are in the redistributor registers on GICv3. */ - for (i = 32; i < gic_irqs; i += 32) + for (i = 32; i < gic_irqs; i += 32) { writel_relaxed(GICD_INT_EN_CLR_X32, - base + GIC_DIST_ENABLE_CLEAR + i / 8); + base + GIC_DIST_ACTIVE_CLEAR + i / 8); + writel_relaxed(GICD_INT_EN_CLR_X32, + base + GIC_DIST_ENABLE_CLEAR + i / 8); + } if (sync_access) sync_access(); @@ -102,7 +105,9 @@ void gic_cpu_config(void __iomem *base, void (*sync_access)(void)) /* * Deal with the banked PPI and SGI interrupts - disable all * PPI interrupts, ensure all SGI interrupts are enabled. + * Make sure everything is deactivated. */ + writel_relaxed(GICD_INT_EN_CLR_X32, base + GIC_DIST_ACTIVE_CLEAR); writel_relaxed(GICD_INT_EN_CLR_PPI, base + GIC_DIST_ENABLE_CLEAR); writel_relaxed(GICD_INT_EN_SET_SGI, base + GIC_DIST_ENABLE_SET);