From: Frans Klaver Date: Wed, 14 Jan 2015 08:15:46 +0000 (+0100) Subject: power: reset: ltc2952: document optional trigger behavior X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0f2ecb8fa29a0bcda8385bc2277d83e3aeaa2b75;p=linux-beck.git power: reset: ltc2952: document optional trigger behavior Document the fact that the trigger signal is now optional, and describe the behavior when this is used. While at it, fix a typo, and paraphrase a sentence to be less platform specific. Signed-off-by: Frans Klaver Signed-off-by: Sebastian Reichel --- diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt index 0c94c637f63b..cd2d7f58a9d7 100644 --- a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt @@ -1,20 +1,23 @@ Binding for the LTC2952 PowerPath controller This chip is used to externally trigger a system shut down. Once the trigger has -been sent, the chips' watchdog has to be reset to gracefully shut down. -If the Linux systems decides to shut down it powers off the platform via the -kill signal. +been sent, the chip's watchdog has to be reset to gracefully shut down. +A full powerdown can be triggered via the kill signal. Required properties: - compatible: Must contain: "lltc,ltc2952" -- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the - chip's trigger line - watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the chip's watchdog line - kill-gpios: phandle + gpio-specifier for the GPIO connected to the chip's kill line +Optional properties: +- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's trigger line. If this property is not set, the + trigger function is ignored and the chip is kept alive + until an explicit kill signal is received + Example: ltc2952 {