From: Heiko Stuebner Date: Fri, 27 Jan 2012 07:28:29 +0000 (+0900) Subject: ARM: S3C24XX: remove unused spi gpio setup functions X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=0f78b2443a654afad7c5efdf0157c80747078682;p=mv-sheeva.git ARM: S3C24XX: remove unused spi gpio setup functions A grep through the kernel source revealed that neither the config-options nor the defined functions are used anywhere in the kernel. There was also no activity in this regard through the last kernel releases, so it seems this situation will not change in the future. Therefore this patch removes this seemingly dead code. Signed-off-by: Heiko Stuebner Signed-off-by: Kukjin Kim --- diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 4d9588373aa..2a686c0751c 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -24,15 +24,4 @@ struct s3c2410_spi_info { void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; -/* Standard setup / suspend routines for SPI GPIO pins. */ - -extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable); - -extern void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable); - #endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index d8973ac46bc..6b1d9184e96 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -98,26 +98,6 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. -# SPI default pin configuration code - -config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 - bool - help - SPI GPIO configuration code for BUS0 when connected to - GPE11, GPE12 and GPE13. - -config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPG5, GPG6 and GPG7. - -config S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10 - bool - help - SPI GPIO configuration code for BUS 1 when connected to - GPD8, GPD9 and GPD10. - # common code for s3c24xx based machines, such as the SMDKs. # cpu frequency items common between s3c2410 and s3c2440/s3c2442 diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index b2b01125de6..7cefd7f9d57 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -38,12 +38,6 @@ obj-$(CONFIG_S3C2410_CPUFREQ_UTILS) += s3c2410-cpufreq-utils.o obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o obj-$(CONFIG_S3C2410_SETUP_TS) += setup-ts.o -# SPI gpio central GPIO functions - -obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o -obj-$(CONFIG_S3C24XX_SPI_BUS1_GPD8_GPD9_GPD10) += spi-bus1-gpd8_9_10.o - # machine common support obj-$(CONFIG_MACH_SMDK) += common-smdk.o diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c deleted file mode 100644 index 704175b0573..00000000000 --- a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include - -#include -#include - -void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPE13_SPICLK0); - s3c_gpio_cfgpin(S3C2410_GPE(12), S3C2410_GPE12_SPIMOSI0); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPE11_SPIMISO0); - s3c2410_gpio_pullup(S3C2410_GPE(11), 0); - s3c2410_gpio_pullup(S3C2410_GPE(13), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPE(13), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPE(11), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPE(11), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(12), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPE(13), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c b/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c deleted file mode 100644 index 72457afd625..00000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpd8_9_10.c +++ /dev/null @@ -1,38 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpd8_9_10.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX SPI - gpio configuration for bus 1 on gpd8,9,10 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include - -#include -#include - -void s3c24xx_spi_gpiocfg_bus1_gpd8_9_10(struct s3c2410_spi_info *spi, - int enable) -{ - - printk(KERN_INFO "%s(%d)\n", __func__, enable); - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPD(10), S3C2440_GPD10_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2440_GPD9_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2440_GPD8_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPD(10), 0); - s3c2410_gpio_pullup(S3C2410_GPD(9), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPD(8), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPD(9), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPD(10), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(9), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPD(8), S3C_GPIO_PULL_NONE); - } -} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c deleted file mode 100644 index c3972b645d1..00000000000 --- a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c +++ /dev/null @@ -1,36 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c - * - * Copyright (c) 2008 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks - * - * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include -#include - -#include -#include - -void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, - int enable) -{ - if (enable) { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPG7_SPICLK1); - s3c_gpio_cfgpin(S3C2410_GPG(6), S3C2410_GPG6_SPIMOSI1); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPG5_SPIMISO1); - s3c2410_gpio_pullup(S3C2410_GPG(5), 0); - s3c2410_gpio_pullup(S3C2410_GPG(6), 0); - } else { - s3c_gpio_cfgpin(S3C2410_GPG(7), S3C2410_GPIO_INPUT); - s3c_gpio_cfgpin(S3C2410_GPG(5), S3C2410_GPIO_INPUT); - s3c_gpio_setpull(S3C2410_GPG(5), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(6), S3C_GPIO_PULL_NONE); - s3c_gpio_setpull(S3C2410_GPG(7), S3C_GPIO_PULL_NONE); - } -}