From: H Hartley Sweeten Date: Tue, 4 Mar 2014 18:29:48 +0000 (-0700) Subject: staging: comedi: pcl818: exit interrupt quick when there is nothing to do X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=10933a9cfa258048813fd8a287be844d30711731;p=linux-beck.git staging: comedi: pcl818: exit interrupt quick when there is nothing to do If an async ai command is not running or the ai_mode is 0 the interrupt routine doesn't do anything other than spew some noise and clear the interrupt request in the hardware. Because this driver is manually attached, the "premature interrupt" check in the interrupt handler should never happen. The interrupt is only hooked up during the attach and it's released during the detach. Combine these checks so that the interrupt function exits quick if it has nothing to handle. Remove the noise. Signed-off-by: H Hartley Sweeten Reviewed-by: Ian Abbott Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/pcl818.c b/drivers/staging/comedi/drivers/pcl818.c index 6c91a7b424d8..d00d6902c4a6 100644 --- a/drivers/staging/comedi/drivers/pcl818.c +++ b/drivers/staging/comedi/drivers/pcl818.c @@ -732,8 +732,9 @@ static irqreturn_t interrupt_pcl818(int irq, void *d) struct pcl818_private *devpriv = dev->private; struct comedi_subdevice *s = dev->read_subdev; - if (!dev->attached) { - comedi_error(dev, "premature interrupt"); + if (!dev->attached || !devpriv->ai_cmd_running || + !devpriv->ai_mode) { + outb(0, dev->iobase + PCL818_CLRINT); return IRQ_HANDLED; } @@ -764,15 +765,8 @@ static irqreturn_t interrupt_pcl818(int irq, void *d) break; } - outb(0, dev->iobase + PCL818_CLRINT); /* clear INT request */ - - if (!devpriv->ai_cmd_running || !devpriv->ai_mode) { - comedi_error(dev, "bad IRQ!"); - return IRQ_NONE; - } - - comedi_error(dev, "IRQ from unknown source!"); - return IRQ_NONE; + outb(0, dev->iobase + PCL818_CLRINT); + return IRQ_HANDLED; } static void pcl818_ai_mode13dma_int(int mode, struct comedi_device *dev,