From: Ranganath Krishnan Date: Fri, 23 Aug 2013 16:08:22 +0000 (-0500) Subject: thermal: ti-soc-thermal: Set the bandgap mask counter delay value X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=10ccff1b578cc7842a0bab959f662305f3dfabc0;p=linux-beck.git thermal: ti-soc-thermal: Set the bandgap mask counter delay value Set the bandgap mask counter_delay with the polling_delay value on registering the thermal zone. This patch will ensure to get the correct update interval for computing the thermal trend. Signed-off-by: Ranganath Krishnan Signed-off-by: Eduardo Valentin --- diff --git a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c index 4c5f55c37349..4f8b9af54a5a 100644 --- a/drivers/thermal/ti-soc-thermal/ti-thermal-common.c +++ b/drivers/thermal/ti-soc-thermal/ti-thermal-common.c @@ -174,6 +174,9 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, enum thermal_device_mode mode) { struct ti_thermal_data *data = thermal->devdata; + struct ti_bandgap *bgp; + + bgp = data->bgp; if (!data->ti_thermal) { dev_notice(&thermal->device, "thermal zone not registered\n"); @@ -190,6 +193,8 @@ static int ti_thermal_set_mode(struct thermal_zone_device *thermal, mutex_unlock(&data->ti_thermal->lock); data->mode = mode; + ti_bandgap_write_update_interval(bgp, data->sensor_id, + data->ti_thermal->polling_delay); thermal_zone_device_update(data->ti_thermal); dev_dbg(&thermal->device, "thermal polling set for duration=%d msec\n", data->ti_thermal->polling_delay); @@ -313,6 +318,8 @@ int ti_thermal_expose_sensor(struct ti_bandgap *bgp, int id, } data->ti_thermal->polling_delay = FAST_TEMP_MONITORING_RATE; ti_bandgap_set_sensor_data(bgp, id, data); + ti_bandgap_write_update_interval(bgp, data->sensor_id, + data->ti_thermal->polling_delay); return 0; }