From: Fabio Estevam Date: Tue, 31 May 2016 20:41:50 +0000 (-0300) Subject: ASoC: sgtl5000: Place optional properties in the correct section X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=10ff08029d9880e4bf70de0535f34ce239af7a9a;p=linux-beck.git ASoC: sgtl5000: Place optional properties in the correct section 'micbias-resistor-k-ohms' and 'micbias-voltage-m-volts' are optional properties, so move them below the 'Optional properties' line. While at it, fix a typo in 'mentioned'. Signed-off-by: Fabio Estevam Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/sound/sgtl5000.txt b/Documentation/devicetree/bindings/sound/sgtl5000.txt index 0e5e4eb3ef1b..5666da7b8605 100644 --- a/Documentation/devicetree/bindings/sound/sgtl5000.txt +++ b/Documentation/devicetree/bindings/sound/sgtl5000.txt @@ -7,6 +7,14 @@ Required properties: - clocks : the clock provider of SYS_MCLK +- VDDA-supply : the regulator provider of VDDA + +- VDDIO-supply: the regulator provider of VDDIO + +Optional properties: + +- VDDD-supply : the regulator provider of VDDD + - micbias-resistor-k-ohms : the bias resistor to be used in kOmhs The resistor can take values of 2k, 4k or 8k. If set to 0 it will be off. @@ -15,17 +23,9 @@ Required properties: - micbias-voltage-m-volts : the bias voltage to be used in mVolts The voltage can take values from 1.25V to 3V by 250mV steps - If this node is not mentionned or the value is unknown, then + If this node is not mentioned or the value is unknown, then the value is set to 1.25V. -- VDDA-supply : the regulator provider of VDDA - -- VDDIO-supply: the regulator provider of VDDIO - -Optional properties: - -- VDDD-supply : the regulator provider of VDDD - Example: codec: sgtl5000@0a {