From: Troy Kisky <troy.kisky@boundarydevices.com>
Date: Tue, 17 Dec 2013 01:12:55 +0000 (-0700)
Subject: ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg
X-Git-Tag: next-20131220~106^2~2^2~7
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=11236efcce5b4d2203308ed1d7cdb81714a70c48;p=karo-tx-linux.git

ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg

This patch moves pin EIM_D22(power enable) from pinctrl_hog to pinctrl_usbotg.
It also explicitly sets the pad to 0x000b0, which is also the value
that it has before this patch if using mainline u-boot.

Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
---

diff --git a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
index 90d99bf1a83b..2654ff12b5bc 100644
--- a/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
@@ -114,7 +114,6 @@
 	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
 			>;
@@ -148,7 +147,11 @@
 		};
 
 		pinctrl_usbotg: usbotggrp {
-			fsl,pins = <MX6QDL_USBOTG_PINGRP1>;
+			fsl,pins = <
+				MX6QDL_USBOTG_PINGRP1
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
+			>;
 		};
 
 		pinctrl_usdhc3: usdhc3grp {