From: Shashank Sharma Date: Wed, 23 Sep 2015 17:57:17 +0000 (+0530) Subject: drm/i915/bxt: Program Tx Rx and Dphy clocks X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=11b8e4f58e1baa94e44400a076b1a3757612ea55;p=linux-beck.git drm/i915/bxt: Program Tx Rx and Dphy clocks BXT DSI clocks are different than previous platforms. So adding a new function to program following clocks and dividers: 1. Program variable divider to generate input to Tx clock divider (Output value must be < 39.5Mhz) 2. Select divide by 2 option to get < 20Mhz for Tx clock 3. Program 8by3 divider to generate Rx clock v2: Fixed Jani's review comments. Adjusted the Macro definition as per convention. Simplified the logic for bit definitions for MIPI PORT A and PORT C in same registers. v3: Refactored the macros for TX, RX Escape and DPHY clocks as per Jani's suggestion. v4: Addressed Jani's review comments. Signed-off-by: Shashank Sharma Signed-off-by: Uma Shankar Reviewed-by: Jani Nikula Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 87de3a085ff6..8c24851b930c 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -7547,6 +7547,68 @@ enum skl_disp_power_wells { #define _MIPI_PORT(port, a, c) _PORT3(port, a, 0, c) /* ports A and C only */ +/* BXT MIPI clock controls */ +#define BXT_MAX_VAR_OUTPUT_KHZ 39500 + +#define BXT_MIPI_CLOCK_CTL 0x46090 +#define BXT_MIPI1_DIV_SHIFT 26 +#define BXT_MIPI2_DIV_SHIFT 10 +#define BXT_MIPI_DIV_SHIFT(port) \ + _MIPI_PORT(port, BXT_MIPI1_DIV_SHIFT, \ + BXT_MIPI2_DIV_SHIFT) +/* Var clock divider to generate TX source. Result must be < 39.5 M */ +#define BXT_MIPI1_ESCLK_VAR_DIV_MASK (0x3F << 26) +#define BXT_MIPI2_ESCLK_VAR_DIV_MASK (0x3F << 10) +#define BXT_MIPI_ESCLK_VAR_DIV_MASK(port) \ + _MIPI_PORT(port, BXT_MIPI1_ESCLK_VAR_DIV_MASK, \ + BXT_MIPI2_ESCLK_VAR_DIV_MASK) + +#define BXT_MIPI_ESCLK_VAR_DIV(port, val) \ + (val << BXT_MIPI_DIV_SHIFT(port)) +/* TX control divider to select actual TX clock output from (8x/var) */ +#define BXT_MIPI1_TX_ESCLK_SHIFT 21 +#define BXT_MIPI2_TX_ESCLK_SHIFT 5 +#define BXT_MIPI_TX_ESCLK_SHIFT(port) \ + _MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_SHIFT, \ + BXT_MIPI2_TX_ESCLK_SHIFT) +#define BXT_MIPI1_TX_ESCLK_FIXDIV_MASK (3 << 21) +#define BXT_MIPI2_TX_ESCLK_FIXDIV_MASK (3 << 5) +#define BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port) \ + _MIPI_PORT(port, BXT_MIPI1_TX_ESCLK_FIXDIV_MASK, \ + BXT_MIPI2_TX_ESCLK_FIXDIV_MASK) +#define BXT_MIPI_TX_ESCLK_8XDIV_BY2(port) \ + (0x0 << BXT_MIPI_TX_ESCLK_SHIFT(port)) +#define BXT_MIPI_TX_ESCLK_8XDIV_BY4(port) \ + (0x1 << BXT_MIPI_TX_ESCLK_SHIFT(port)) +#define BXT_MIPI_TX_ESCLK_8XDIV_BY8(port) \ + (0x2 << BXT_MIPI_TX_ESCLK_SHIFT(port)) +/* RX control divider to select actual RX clock output from 8x*/ +#define BXT_MIPI1_RX_ESCLK_SHIFT 19 +#define BXT_MIPI2_RX_ESCLK_SHIFT 3 +#define BXT_MIPI_RX_ESCLK_SHIFT(port) \ + _MIPI_PORT(port, BXT_MIPI1_RX_ESCLK_SHIFT, \ + BXT_MIPI2_RX_ESCLK_SHIFT) +#define BXT_MIPI1_RX_ESCLK_FIXDIV_MASK (3 << 19) +#define BXT_MIPI2_RX_ESCLK_FIXDIV_MASK (3 << 3) +#define BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port) \ + (3 << BXT_MIPI_RX_ESCLK_SHIFT(port)) +#define BXT_MIPI_RX_ESCLK_8X_BY2(port) \ + (1 << BXT_MIPI_RX_ESCLK_SHIFT(port)) +#define BXT_MIPI_RX_ESCLK_8X_BY3(port) \ + (2 << BXT_MIPI_RX_ESCLK_SHIFT(port)) +#define BXT_MIPI_RX_ESCLK_8X_BY4(port) \ + (3 << BXT_MIPI_RX_ESCLK_SHIFT(port)) +/* BXT-A WA: Always prog DPHY dividers to 00 */ +#define BXT_MIPI1_DPHY_DIV_SHIFT 16 +#define BXT_MIPI2_DPHY_DIV_SHIFT 0 +#define BXT_MIPI_DPHY_DIV_SHIFT(port) \ + _MIPI_PORT(port, BXT_MIPI1_DPHY_DIV_SHIFT, \ + BXT_MIPI2_DPHY_DIV_SHIFT) +#define BXT_MIPI_1_DPHY_DIVIDER_MASK (3 << 16) +#define BXT_MIPI_2_DPHY_DIVIDER_MASK (3 << 0) +#define BXT_MIPI_DPHY_DIVIDER_MASK(port) \ + (3 << BXT_MIPI_DPHY_DIV_SHIFT(port)) + /* BXT MIPI mode configure */ #define _BXT_MIPIA_TRANS_HACTIVE 0x6B0F8 #define _BXT_MIPIC_TRANS_HACTIVE 0x6B8F8 diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c index f335e6cd4431..386336281997 100644 --- a/drivers/gpu/drm/i915/intel_dsi_pll.c +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c @@ -384,6 +384,42 @@ u32 vlv_get_dsi_pclk(struct intel_encoder *encoder, int pipe_bpp) return pclk; } +/* Program BXT Mipi clocks and dividers */ +static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port) +{ + u32 tmp; + u32 divider; + u32 dsi_rate; + u32 pll_ratio; + struct drm_i915_private *dev_priv = dev->dev_private; + + /* Clear old configurations */ + tmp = I915_READ(BXT_MIPI_CLOCK_CTL); + tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); + tmp &= ~(BXT_MIPI_RX_ESCLK_FIXDIV_MASK(port)); + tmp &= ~(BXT_MIPI_ESCLK_VAR_DIV_MASK(port)); + tmp &= ~(BXT_MIPI_DPHY_DIVIDER_MASK(port)); + + /* Get the current DSI rate(actual) */ + pll_ratio = I915_READ(BXT_DSI_PLL_CTL) & + BXT_DSI_PLL_RATIO_MASK; + dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2; + + /* Max possible output of clock is 39.5 MHz, program value -1 */ + divider = (dsi_rate / BXT_MAX_VAR_OUTPUT_KHZ) - 1; + tmp |= BXT_MIPI_ESCLK_VAR_DIV(port, divider); + + /* + * Tx escape clock must be as close to 20MHz possible, but should + * not exceed it. Hence select divide by 2 + */ + tmp |= BXT_MIPI_TX_ESCLK_8XDIV_BY2(port); + + tmp |= BXT_MIPI_RX_ESCLK_8X_BY3(port); + + I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); +} + static bool bxt_configure_dsi_pll(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; @@ -435,6 +471,8 @@ static bool bxt_configure_dsi_pll(struct intel_encoder *encoder) static void bxt_enable_dsi_pll(struct intel_encoder *encoder) { struct drm_i915_private *dev_priv = encoder->base.dev->dev_private; + struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); + enum port port; u32 val; DRM_DEBUG_KMS("\n"); @@ -453,6 +491,10 @@ static void bxt_enable_dsi_pll(struct intel_encoder *encoder) return; } + /* Program TX, RX, Dphy clocks */ + for_each_dsi_port(port, intel_dsi->ports) + bxt_dsi_program_clocks(encoder->base.dev, port); + /* Enable DSI PLL */ val = I915_READ(BXT_DSI_PLL_ENABLE); val |= BXT_DSI_PLL_DO_ENABLE;