From: Jesse Barnes Date: Fri, 8 Mar 2013 18:45:59 +0000 (-0800) Subject: drm/i915: DSPFW and BLC regs are in the display offset range X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=12569ad6eaee31033333882a74df71588a8584c2;p=linux-beck.git drm/i915: DSPFW and BLC regs are in the display offset range Signed-off-by: Jesse Barnes Signed-off-by: Daniel Vetter --- diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h index 17cb78f5760a..50dba38f5035 100644 --- a/drivers/gpu/drm/i915/i915_reg.h +++ b/drivers/gpu/drm/i915/i915_reg.h @@ -1923,7 +1923,7 @@ #define PFIT_AUTO_RATIOS (dev_priv->info->display_mmio_offset + 0x61238) /* Backlight control */ -#define BLC_PWM_CTL2 0x61250 /* 965+ only */ +#define BLC_PWM_CTL2 (dev_priv->info->display_mmio_offset + 0x61250) /* 965+ only */ #define BLM_PWM_ENABLE (1 << 31) #define BLM_COMBINATION_MODE (1 << 30) /* gen4 only */ #define BLM_PIPE_SELECT (1 << 29) @@ -1942,7 +1942,7 @@ #define BLM_PHASE_IN_COUNT_MASK (0xff << 8) #define BLM_PHASE_IN_INCR_SHIFT (0) #define BLM_PHASE_IN_INCR_MASK (0xff << 0) -#define BLC_PWM_CTL 0x61254 +#define BLC_PWM_CTL (dev_priv->info->display_mmio_offset + 0x61254) /* * This is the most significant 15 bits of the number of backlight cycles in a * complete cycle of the modulated backlight control. @@ -1964,7 +1964,7 @@ #define BACKLIGHT_DUTY_CYCLE_MASK_PNV (0xfffe) #define BLM_POLARITY_PNV (1 << 0) /* pnv only */ -#define BLC_HIST_CTL 0x61260 +#define BLC_HIST_CTL (dev_priv->info->display_mmio_offset + 0x61260) /* New registers for PCH-split platforms. Safe where new bits show up, the * register layout machtes with gen4 BLC_PWM_CTL[12]. */ @@ -2801,6 +2801,8 @@ #define DSPFW_HPLL_CURSOR_SHIFT 16 #define DSPFW_HPLL_CURSOR_MASK (0x3f<<16) #define DSPFW_HPLL_SR_MASK (0x1ff) +#define DSPFW4 (dev_priv->info->display_mmio_offset + 0x70070) +#define DSPFW7 (dev_priv->info->display_mmio_offset + 0x7007c) /* drain latency register values*/ #define DRAIN_LATENCY_PRECISION_32 32