From: Ralf Baechle <ralf@linux-mips.org>
Date: Sun, 26 Jun 2005 21:45:52 +0000 (-0400)
Subject: Tulip fixes for Cobalt Qube/RaQ
X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=12755c16a9e4fa2fd5b0ca1963e83d671a6251da;p=mv-sheeva.git

Tulip fixes for Cobalt Qube/RaQ
---

diff --git a/drivers/net/tulip/eeprom.c b/drivers/net/tulip/eeprom.c
index ac5bf49ff60..fbd9ab60b05 100644
--- a/drivers/net/tulip/eeprom.c
+++ b/drivers/net/tulip/eeprom.c
@@ -63,6 +63,22 @@ static struct eeprom_fixup eeprom_fixups[] __devinitdata = {
 	 */
 	{ 0x1e00, 0x0000, 0x000b, 0x8f01, 0x0103, 0x0300, 0x0821, 0x000, 0x0001, 0x0000, 0x01e1 }
   },
+  {"Cobalt Microserver", 0, 0x10, 0xE0, {0x1e00, /* 0 == controller #, 1e == offset	*/
+					 0x0000, /* 0 == high offset, 0 == gap		*/
+					 0x0800, /* Default Autoselect			*/
+					 0x8001, /* 1 leaf, extended type, bogus len	*/
+					 0x0003, /* Type 3 (MII), PHY #0		*/
+					 0x0400, /* 0 init instr, 4 reset instr		*/
+					 0x0801, /* Set control mode, GP0 output	*/
+					 0x0000, /* Drive GP0 Low (RST is active low)	*/
+					 0x0800, /* control mode, GP0 input (undriven)	*/
+					 0x0000, /* clear control mode			*/
+					 0x7800, /* 100TX FDX + HDX, 10bT FDX + HDX	*/
+					 0x01e0, /* Advertise all above			*/
+					 0x5000, /* FDX all above			*/
+					 0x1800, /* Set fast TTM in 100bt modes		*/
+					 0x0000, /* PHY cannot be unplugged		*/
+  }},
   {NULL}};
 
 
diff --git a/drivers/net/tulip/media.c b/drivers/net/tulip/media.c
index 919c40cd635..e26c31f944b 100644
--- a/drivers/net/tulip/media.c
+++ b/drivers/net/tulip/media.c
@@ -400,6 +400,9 @@ void tulip_select_media(struct net_device *dev, int startup)
 	}
 
 	tp->csr6 = new_csr6 | (tp->csr6 & 0xfdff) | (tp->full_duplex ? 0x0200 : 0);
+
+	mdelay(1);
+
 	return;
 }
 
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c
index e0ae3ed6e57..cfc346e72d6 100644
--- a/drivers/net/tulip/tulip_core.c
+++ b/drivers/net/tulip/tulip_core.c
@@ -1514,8 +1514,8 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
                     (PCI_SLOT(pdev->devfn) == 12))) {
                        /* Cobalt MAC address in first EEPROM locations. */
                        sa_offset = 0;
-                       /* No media table either */
-                       tp->flags &= ~HAS_MEDIA_TABLE;
+		       /* Ensure our media table fixup get's applied */
+		       memcpy(ee_data + 16, ee_data, 8);
                }
 #endif
 #ifdef CONFIG_GSC