From: Govindraj.R Date: Mon, 27 Sep 2010 14:50:57 +0000 (+0530) Subject: OMAP: SERIAL: Enable omap-serial driver in Kconfig X-Git-Tag: v2.6.37-rc1~121^2~25^2^2~1 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=12a75da296d43784c960a2beaca002a08d06cf15;p=karo-tx-linux.git OMAP: SERIAL: Enable omap-serial driver in Kconfig Enable omap-serial driver in /mach-omap2/Kconfig and move 8250 driver selection for zoom boards. With omap-serial driver addition all omap-uarts can be handled with omap-serial driver. With addition of omap-serial driver console parameter needs be changed in bootargs from ttyS* should be replaced with ttyO* [O --> OMAP not ZERO] For example: ttyS0[UART1 on 3430SDP] changes to ttyO0. But with some boards that do not use omap-uart as console uart. we need to handle them with 8250 driver. Ex: ZOOM2/3. For zoom2/3 board we need to use 8250 serial driver and console parameter will remain ttyS0 which basically uses a Quad uart placed on the debug board connected through a gpio line. Signed-off-by: Govindraj.R Signed-off-by: Kevin Hilman --- diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 1c4b2377862b..91dd215d05f0 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -11,9 +11,8 @@ config ARCH_OMAP2PLUS_TYPICAL select PM_RUNTIME select VFP select NEON if ARCH_OMAP3 || ARCH_OMAP4 - select SERIAL_8250 - select SERIAL_CORE_CONSOLE - select SERIAL_8250_CONSOLE + select SERIAL_OMAP + select SERIAL_OMAP_CONSOLE select I2C select I2C_OMAP select MFD @@ -222,12 +221,18 @@ config MACH_OMAP_ZOOM2 depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBB + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_OMAP_ZOOM3 bool "OMAP3630 Zoom3 board" depends on ARCH_OMAP3 default y select OMAP_PACKAGE_CBP + select SERIAL_8250 + select SERIAL_CORE_CONSOLE + select SERIAL_8250_CONSOLE config MACH_CM_T35 bool "CompuLab CM-T35 module"