From: Xiubo Li Date: Fri, 23 May 2014 08:12:04 +0000 (+0200) Subject: clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation X-Git-Tag: next-20140530~35^2~2 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=12e499d0ed1fa09940a573e5a8cce52b556f3c38;p=karo-tx-linux.git clocksource: ftm: Add FlexTimer Module (FTM) Timer devicetree Documentation The FTM binding could be used on Vybrid and LS1+, add a binding document for it. Signed-off-by: Xiubo Li Cc: Shawn Guo Cc: Jingchang Lu Signed-off-by: Daniel Lezcano --- diff --git a/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt new file mode 100644 index 000000000000..aa8c40230e5e --- /dev/null +++ b/Documentation/devicetree/bindings/timer/fsl,ftm-timer.txt @@ -0,0 +1,31 @@ +Freescale FlexTimer Module (FTM) Timer + +Required properties: + +- compatible : should be "fsl,ftm-timer" +- reg : Specifies base physical address and size of the register sets for the + clock event device and clock source device. +- interrupts : Should be the clock event device interrupt. +- clocks : The clocks provided by the SoC to drive the timer, must contain an + entry for each entry in clock-names. +- clock-names : Must include the following entries: + o "ftm-evt" + o "ftm-src" + o "ftm-evt-counter-en" + o "ftm-src-counter-en" +- big-endian: One boolean property, the big endian mode will be in use if it is + present, or the little endian mode will be in use for all the device registers. + +Example: +ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + big-endian; +};