From: Yuval Mintz Date: Thu, 25 Jun 2015 12:19:21 +0000 (+0300) Subject: bnx2x: Correct asymmetric flow-control X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1359d73c1d6fa737545d946f9bcb4b9a6b13a6ea;p=linux-beck.git bnx2x: Correct asymmetric flow-control This fixes several issues relating to asymmetric configuration: 1. When user requests to disable TX, the local-device needs to advertise both PAUSE and ASM_DIR, but to avoid transmitting pause frames. In the 578xx, it would ignore the TX disable. 2. When user advertises RX-only, ASM_DIR was advertised instead of PAUSE/ASM_DIR. 3. When changing mode, the advertised PAUSE/ASM_DIR was not cleared before setting new one, so disabling RX or TX had no impact on the 'advertised' as appeared in the 'ethtool -a' output. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index 21a0d6afca4a..b287fc8d3c80 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -3392,9 +3392,9 @@ static void bnx2x_calc_ieee_aneg_adv(struct bnx2x_phy *phy, case BNX2X_FLOW_CTRL_AUTO: switch (params->req_fc_auto_adv) { case BNX2X_FLOW_CTRL_BOTH: + case BNX2X_FLOW_CTRL_RX: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH; break; - case BNX2X_FLOW_CTRL_RX: case BNX2X_FLOW_CTRL_TX: *ieee_fc |= MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_ASYMMETRIC; @@ -3488,14 +3488,21 @@ static void bnx2x_ext_phy_set_pause(struct link_params *params, bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_AN_REG_ADV_PAUSE, val); } -static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) -{ /* LD LP */ +static void bnx2x_pause_resolve(struct bnx2x_phy *phy, + struct link_params *params, + struct link_vars *vars, + u32 pause_result) +{ + struct bnx2x *bp = params->bp; + /* LD LP */ switch (pause_result) { /* ASYM P ASYM P */ case 0xb: /* 1 0 1 1 */ + DP(NETIF_MSG_LINK, "Flow Control: TX only\n"); vars->flow_ctrl = BNX2X_FLOW_CTRL_TX; break; case 0xe: /* 1 1 1 0 */ + DP(NETIF_MSG_LINK, "Flow Control: RX only\n"); vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; break; @@ -3503,10 +3510,22 @@ static void bnx2x_pause_resolve(struct link_vars *vars, u32 pause_result) case 0x7: /* 0 1 1 1 */ case 0xd: /* 1 1 0 1 */ case 0xf: /* 1 1 1 1 */ - vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; + /* If the user selected to advertise RX ONLY, + * although we advertised both, need to enable + * RX only. + */ + if (params->req_fc_auto_adv == BNX2X_FLOW_CTRL_BOTH) { + DP(NETIF_MSG_LINK, "Flow Control: RX & TX\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_BOTH; + } else { + DP(NETIF_MSG_LINK, "Flow Control: RX only\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_RX; + } break; default: + DP(NETIF_MSG_LINK, "Flow Control: None\n"); + vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; break; } if (pause_result & (1<<0)) @@ -3567,7 +3586,7 @@ static void bnx2x_ext_phy_update_adv_fc(struct bnx2x_phy *phy, pause_result |= (lp_pause & MDIO_AN_REG_ADV_PAUSE_MASK) >> 10; DP(NETIF_MSG_LINK, "Ext PHY pause result 0x%x\n", pause_result); - bnx2x_pause_resolve(vars, pause_result); + bnx2x_pause_resolve(phy, params, vars, pause_result); } @@ -5396,7 +5415,7 @@ static void bnx2x_update_adv_fc(struct bnx2x_phy *phy, MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK)>>7; DP(NETIF_MSG_LINK, "pause_result CL37 0x%x\n", pause_result); } - bnx2x_pause_resolve(vars, pause_result); + bnx2x_pause_resolve(phy, params, vars, pause_result); } @@ -7129,7 +7148,7 @@ static void bnx2x_8073_resolve_fc(struct bnx2x_phy *phy, pause_result |= (lp_pause & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH) >> 7; - bnx2x_pause_resolve(vars, pause_result); + bnx2x_pause_resolve(phy, params, vars, pause_result); DP(NETIF_MSG_LINK, "Ext PHY CL37 pause result 0x%x\n", pause_result); } diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 33501bcddc48..a03a9f25f8bb 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -2287,13 +2287,11 @@ static int bnx2x_set_spio(struct bnx2x *bp, int spio, u32 mode) void bnx2x_calc_fc_adv(struct bnx2x *bp) { u8 cfg_idx = bnx2x_get_link_cfg_idx(bp); + + bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | + ADVERTISED_Pause); switch (bp->link_vars.ieee_fc & MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_MASK) { - case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_NONE: - bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | - ADVERTISED_Pause); - break; - case MDIO_COMBO_IEEE0_AUTO_NEG_ADV_PAUSE_BOTH: bp->port.advertising[cfg_idx] |= (ADVERTISED_Asym_Pause | ADVERTISED_Pause); @@ -2304,8 +2302,6 @@ void bnx2x_calc_fc_adv(struct bnx2x *bp) break; default: - bp->port.advertising[cfg_idx] &= ~(ADVERTISED_Asym_Pause | - ADVERTISED_Pause); break; } }