From: Nithin Sujir Date: Tue, 12 Mar 2013 15:32:48 +0000 (+0000) Subject: tg3: 5715 does not link up when autoneg off X-Git-Tag: v3.4.38~67 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=147289d28fb7b7c10a9f8a2cd9e274a41fc3f1f6;p=karo-tx-linux.git tg3: 5715 does not link up when autoneg off [ Upstream commit 7c6cdead7cc9a99650d15497aae47d7472217eb1 ] Commit d13ba512cbba7de5d55d7a3b2aae7d83c8921457 ("tg3: Remove SPEED_UNKNOWN checks") cleaned up the autoneg advertisement by removing some dead code. One effect of this change was that the advertisement register would not be updated if autoneg is turned off. This exposed a bug on the 5715 device w.r.t linking. The 5715 defaults to advertise only 10Mb Full duplex. But with autoneg disabled, it needs the configured speed enabled in the advertisement register to link up. This patch adds the work around to advertise all speeds on the 5715 when autoneg is disabled. Reported-by: Marcin Miotk Reviewed-by: Benjamin Li Signed-off-by: Nithin Nayak Sujir Signed-off-by: Michael Chan Signed-off-by: David S. Miller Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index e143d8c0be5b..15ed91fef90f 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -3946,6 +3946,14 @@ static void tg3_phy_copper_begin(struct tg3 *tp) tp->link_config.active_speed = tp->link_config.speed; tp->link_config.active_duplex = tp->link_config.duplex; + if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5714) { + /* With autoneg disabled, 5715 only links up when the + * advertisement register has the configured speed + * enabled. + */ + tg3_writephy(tp, MII_ADVERTISE, ADVERTISE_ALL); + } + bmcr = 0; switch (tp->link_config.speed) { default: