From: Jerry Huang Date: Mon, 16 Jan 2012 06:13:04 +0000 (+0800) Subject: mmc: esdhc: set the timeout to the max value X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=147c3b338d1029b6624b7dbe7f7bb98f14236f3b;p=linux-beck.git mmc: esdhc: set the timeout to the max value When accessing the card on some FSL platform boards (e.g p2020, p1010, mpc8536), the following error is reported with the timeout value calculated: mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. mmc0: Got data interrupt 0x00000020 even though no data operation was in progress. So we skip the calculation of timeout and use the max value to fix it. Signed-off-by: Jerry Huang Signed-off-by: Gao Guanhua Signed-off-by: Xie Xiaobo Acked-by: Anton Vorontsov Signed-off-by: Chris Ball --- diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index 67b9ab075dee..c5c2a48bdd94 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -74,6 +74,11 @@ void sdhci_get_of_property(struct platform_device *pdev) if (of_device_is_compatible(np, "fsl,p2020-rev1-esdhc")) host->quirks |= SDHCI_QUIRK_BROKEN_DMA; + if (of_device_is_compatible(np, "fsl,p2020-esdhc") || + of_device_is_compatible(np, "fsl,p1010-esdhc") || + of_device_is_compatible(np, "fsl,mpc8536-esdhc")) + host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL; + clk = of_get_property(np, "clock-frequency", &size); if (clk && size == sizeof(*clk) && *clk) pltfm_host->clock = be32_to_cpup(clk);