From: Mauro Carvalho Chehab Date: Fri, 24 Jun 2016 12:32:56 +0000 (-0300) Subject: m5602_ov9650: move skeletons to the .c file X-Git-Tag: v4.8-rc1~152^2~252 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=14ccffa3c1497dff59707f7e55888d83a4896bfe;p=karo-tx-linux.git m5602_ov9650: move skeletons to the .c file The header file has some private static structures that are used only by the C file. Move those structures to the C file, in order to shut up gcc 6.1 warnings. Signed-off-by: Mauro Carvalho Chehab --- diff --git a/drivers/media/usb/gspca/m5602/m5602_ov9650.c b/drivers/media/usb/gspca/m5602/m5602_ov9650.c index 59bc62bfae26..4544d3a1ad58 100644 --- a/drivers/media/usb/gspca/m5602/m5602_ov9650.c +++ b/drivers/media/usb/gspca/m5602/m5602_ov9650.c @@ -1,3 +1,4 @@ + /* * Driver for the ov9650 sensor * @@ -23,6 +24,157 @@ static int ov9650_s_ctrl(struct v4l2_ctrl *ctrl); static void ov9650_dump_registers(struct sd *sd); +static const unsigned char preinit_ov9650[][3] = { + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40} +}; + +static const unsigned char init_ov9650[][3] = { + /* [INITCAM] */ + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, + + /* Reset chip */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + /* One extra reset is needed in order to make the sensor behave + properly when resuming from ram, could be a timing issue */ + {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, + + /* Enable double clock */ + {SENSOR, OV9650_CLKRC, 0x80}, + /* Do something out of spec with the power */ + {SENSOR, OV9650_OFON, 0x40}, + + /* Set fast AGC/AEC algorithm with unlimited step size */ + {SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC | + OV9650_AEC_UNLIM_STEP_SIZE}, + + {SENSOR, OV9650_CHLF, 0x10}, + {SENSOR, OV9650_ARBLM, 0xbf}, + {SENSOR, OV9650_ACOM38, 0x81}, + /* Turn off color matrix coefficient double option */ + {SENSOR, OV9650_COM16, 0x00}, + /* Enable color matrix for RGB/YUV, Delay Y channel, + set output Y/UV delay to 1 */ + {SENSOR, OV9650_COM13, 0x19}, + /* Enable digital BLC, Set output mode to U Y V Y */ + {SENSOR, OV9650_TSLB, 0x0c}, + /* Limit the AGC/AEC stable upper region */ + {SENSOR, OV9650_COM24, 0x00}, + /* Enable HREF and some out of spec things */ + {SENSOR, OV9650_COM12, 0x73}, + /* Set all DBLC offset signs to positive and + do some out of spec stuff */ + {SENSOR, OV9650_DBLC1, 0xdf}, + {SENSOR, OV9650_COM21, 0x06}, + {SENSOR, OV9650_RSVD35, 0x91}, + /* Necessary, no camera stream without it */ + {SENSOR, OV9650_RSVD16, 0x06}, + {SENSOR, OV9650_RSVD94, 0x99}, + {SENSOR, OV9650_RSVD95, 0x99}, + {SENSOR, OV9650_RSVD96, 0x04}, + /* Enable full range output */ + {SENSOR, OV9650_COM15, 0x0}, + /* Enable HREF at optical black, enable ADBLC bias, + enable ADBLC, reset timings at format change */ + {SENSOR, OV9650_COM6, 0x4b}, + /* Subtract 32 from the B channel bias */ + {SENSOR, OV9650_BBIAS, 0xa0}, + /* Subtract 32 from the Gb channel bias */ + {SENSOR, OV9650_GbBIAS, 0xa0}, + /* Do not bypass the analog BLC and to some out of spec stuff */ + {SENSOR, OV9650_Gr_COM, 0x00}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0xa0}, + /* Subtract 32 from the R channel bias */ + {SENSOR, OV9650_RBIAS, 0x0}, + {SENSOR, OV9650_COM26, 0x80}, + {SENSOR, OV9650_ACOMA9, 0x98}, + /* Set the AGC/AEC stable region upper limit */ + {SENSOR, OV9650_AEW, 0x68}, + /* Set the AGC/AEC stable region lower limit */ + {SENSOR, OV9650_AEB, 0x5c}, + /* Set the high and low limit nibbles to 3 */ + {SENSOR, OV9650_VPT, 0xc3}, + /* Set the Automatic Gain Ceiling (AGC) to 128x, + drop VSYNC at frame drop, + limit exposure timing, + drop frame when the AEC step is larger than the exposure gap */ + {SENSOR, OV9650_COM9, 0x6e}, + /* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync) + and set PWDN to SLVS (slave mode vertical sync) */ + {SENSOR, OV9650_COM10, 0x42}, + /* Set horizontal column start high to default value */ + {SENSOR, OV9650_HSTART, 0x1a}, /* 210 */ + /* Set horizontal column end */ + {SENSOR, OV9650_HSTOP, 0xbf}, /* 1534 */ + /* Complementing register to the two writes above */ + {SENSOR, OV9650_HREF, 0xb2}, + /* Set vertical row start high bits */ + {SENSOR, OV9650_VSTRT, 0x02}, + /* Set vertical row end low bits */ + {SENSOR, OV9650_VSTOP, 0x7e}, + /* Set complementing vertical frame control */ + {SENSOR, OV9650_VREF, 0x10}, + {SENSOR, OV9650_ADC, 0x04}, + {SENSOR, OV9650_HV, 0x40}, + + /* Enable denoise, and white-pixel erase */ + {SENSOR, OV9650_COM22, OV9650_DENOISE_ENABLE | + OV9650_WHITE_PIXEL_ENABLE | + OV9650_WHITE_PIXEL_OPTION}, + + /* Enable VARIOPIXEL */ + {SENSOR, OV9650_COM3, OV9650_VARIOPIXEL}, + {SENSOR, OV9650_COM4, OV9650_QVGA_VARIOPIXEL}, + + /* Put the sensor in soft sleep mode */ + {SENSOR, OV9650_COM2, OV9650_SOFT_SLEEP | OV9650_OUTPUT_DRIVE_2X}, +}; + +static const unsigned char res_init_ov9650[][3] = { + {SENSOR, OV9650_COM2, OV9650_OUTPUT_DRIVE_2X}, + + {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82}, + {BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00}, + {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, + {BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00}, + {BRIDGE, M5602_XB_SIG_INI, 0x01} +}; + /* Vertically and horizontally flips the image if matched, needed for machines where the sensor is mounted upside down */ static diff --git a/drivers/media/usb/gspca/m5602/m5602_ov9650.h b/drivers/media/usb/gspca/m5602/m5602_ov9650.h index f9f5870da60f..ce3db062c740 100644 --- a/drivers/media/usb/gspca/m5602/m5602_ov9650.h +++ b/drivers/media/usb/gspca/m5602/m5602_ov9650.h @@ -156,154 +156,4 @@ static const struct m5602_sensor ov9650 = { .disconnect = ov9650_disconnect, }; -static const unsigned char preinit_ov9650[][3] = { - /* [INITCAM] */ - {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, - {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, - {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, - - {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, - {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, - {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, - /* Reset chip */ - {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, - /* Enable double clock */ - {SENSOR, OV9650_CLKRC, 0x80}, - /* Do something out of spec with the power */ - {SENSOR, OV9650_OFON, 0x40} -}; - -static const unsigned char init_ov9650[][3] = { - /* [INITCAM] */ - {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, - {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, - {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, - - {BRIDGE, M5602_XB_SENSOR_TYPE, 0x08}, - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, - {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DAT_H, 0x00}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, - {BRIDGE, M5602_XB_I2C_CLK_DIV, 0x0a}, - - /* Reset chip */ - {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, - /* One extra reset is needed in order to make the sensor behave - properly when resuming from ram, could be a timing issue */ - {SENSOR, OV9650_COM7, OV9650_REGISTER_RESET}, - - /* Enable double clock */ - {SENSOR, OV9650_CLKRC, 0x80}, - /* Do something out of spec with the power */ - {SENSOR, OV9650_OFON, 0x40}, - - /* Set fast AGC/AEC algorithm with unlimited step size */ - {SENSOR, OV9650_COM8, OV9650_FAST_AGC_AEC | - OV9650_AEC_UNLIM_STEP_SIZE}, - - {SENSOR, OV9650_CHLF, 0x10}, - {SENSOR, OV9650_ARBLM, 0xbf}, - {SENSOR, OV9650_ACOM38, 0x81}, - /* Turn off color matrix coefficient double option */ - {SENSOR, OV9650_COM16, 0x00}, - /* Enable color matrix for RGB/YUV, Delay Y channel, - set output Y/UV delay to 1 */ - {SENSOR, OV9650_COM13, 0x19}, - /* Enable digital BLC, Set output mode to U Y V Y */ - {SENSOR, OV9650_TSLB, 0x0c}, - /* Limit the AGC/AEC stable upper region */ - {SENSOR, OV9650_COM24, 0x00}, - /* Enable HREF and some out of spec things */ - {SENSOR, OV9650_COM12, 0x73}, - /* Set all DBLC offset signs to positive and - do some out of spec stuff */ - {SENSOR, OV9650_DBLC1, 0xdf}, - {SENSOR, OV9650_COM21, 0x06}, - {SENSOR, OV9650_RSVD35, 0x91}, - /* Necessary, no camera stream without it */ - {SENSOR, OV9650_RSVD16, 0x06}, - {SENSOR, OV9650_RSVD94, 0x99}, - {SENSOR, OV9650_RSVD95, 0x99}, - {SENSOR, OV9650_RSVD96, 0x04}, - /* Enable full range output */ - {SENSOR, OV9650_COM15, 0x0}, - /* Enable HREF at optical black, enable ADBLC bias, - enable ADBLC, reset timings at format change */ - {SENSOR, OV9650_COM6, 0x4b}, - /* Subtract 32 from the B channel bias */ - {SENSOR, OV9650_BBIAS, 0xa0}, - /* Subtract 32 from the Gb channel bias */ - {SENSOR, OV9650_GbBIAS, 0xa0}, - /* Do not bypass the analog BLC and to some out of spec stuff */ - {SENSOR, OV9650_Gr_COM, 0x00}, - /* Subtract 32 from the R channel bias */ - {SENSOR, OV9650_RBIAS, 0xa0}, - /* Subtract 32 from the R channel bias */ - {SENSOR, OV9650_RBIAS, 0x0}, - {SENSOR, OV9650_COM26, 0x80}, - {SENSOR, OV9650_ACOMA9, 0x98}, - /* Set the AGC/AEC stable region upper limit */ - {SENSOR, OV9650_AEW, 0x68}, - /* Set the AGC/AEC stable region lower limit */ - {SENSOR, OV9650_AEB, 0x5c}, - /* Set the high and low limit nibbles to 3 */ - {SENSOR, OV9650_VPT, 0xc3}, - /* Set the Automatic Gain Ceiling (AGC) to 128x, - drop VSYNC at frame drop, - limit exposure timing, - drop frame when the AEC step is larger than the exposure gap */ - {SENSOR, OV9650_COM9, 0x6e}, - /* Set VSYNC negative, Set RESET to SLHS (slave mode horizontal sync) - and set PWDN to SLVS (slave mode vertical sync) */ - {SENSOR, OV9650_COM10, 0x42}, - /* Set horizontal column start high to default value */ - {SENSOR, OV9650_HSTART, 0x1a}, /* 210 */ - /* Set horizontal column end */ - {SENSOR, OV9650_HSTOP, 0xbf}, /* 1534 */ - /* Complementing register to the two writes above */ - {SENSOR, OV9650_HREF, 0xb2}, - /* Set vertical row start high bits */ - {SENSOR, OV9650_VSTRT, 0x02}, - /* Set vertical row end low bits */ - {SENSOR, OV9650_VSTOP, 0x7e}, - /* Set complementing vertical frame control */ - {SENSOR, OV9650_VREF, 0x10}, - {SENSOR, OV9650_ADC, 0x04}, - {SENSOR, OV9650_HV, 0x40}, - - /* Enable denoise, and white-pixel erase */ - {SENSOR, OV9650_COM22, OV9650_DENOISE_ENABLE | - OV9650_WHITE_PIXEL_ENABLE | - OV9650_WHITE_PIXEL_OPTION}, - - /* Enable VARIOPIXEL */ - {SENSOR, OV9650_COM3, OV9650_VARIOPIXEL}, - {SENSOR, OV9650_COM4, OV9650_QVGA_VARIOPIXEL}, - - /* Put the sensor in soft sleep mode */ - {SENSOR, OV9650_COM2, OV9650_SOFT_SLEEP | OV9650_OUTPUT_DRIVE_2X}, -}; - -static const unsigned char res_init_ov9650[][3] = { - {SENSOR, OV9650_COM2, OV9650_OUTPUT_DRIVE_2X}, - - {BRIDGE, M5602_XB_LINE_OF_FRAME_H, 0x82}, - {BRIDGE, M5602_XB_LINE_OF_FRAME_L, 0x00}, - {BRIDGE, M5602_XB_PIX_OF_LINE_H, 0x82}, - {BRIDGE, M5602_XB_PIX_OF_LINE_L, 0x00}, - {BRIDGE, M5602_XB_SIG_INI, 0x01} -}; #endif