From: Stephen Hemminger Date: Tue, 26 Sep 2006 18:57:43 +0000 (-0700) Subject: [PATCH] sky2: fragmented receive for large MTU X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=14d0263fea0613d4f83dc5e3ad4631f363d1689f;p=linux-beck.git [PATCH] sky2: fragmented receive for large MTU Use hardware support for chained receive to break up large frames into multiple pages. This avoids having to do a mult-page allocation that can fail on a busy system due to fragmented memory. For normal size MTU, this code behaves the same. Signed-off-by: Stephen Hemminger Signed-off-by: Jeff Garzik --- diff --git a/drivers/net/sky2.c b/drivers/net/sky2.c index c83d7262a5a8..7b19db598ff4 100644 --- a/drivers/net/sky2.c +++ b/drivers/net/sky2.c @@ -56,13 +56,12 @@ /* * The Yukon II chipset takes 64 bit command blocks (called list elements) * that are organized into three (receive, transmit, status) different rings - * similar to Tigon3. A transmit can require several elements; - * a receive requires one (or two if using 64 bit dma). + * similar to Tigon3. */ -#define RX_LE_SIZE 512 +#define RX_LE_SIZE 1024 #define RX_LE_BYTES (RX_LE_SIZE*sizeof(struct sky2_rx_le)) -#define RX_MAX_PENDING (RX_LE_SIZE/2 - 2) +#define RX_MAX_PENDING (RX_LE_SIZE/6 - 2) #define RX_DEF_PENDING RX_MAX_PENDING #define RX_SKB_ALIGN 8 #define RX_BUF_WRITE 16 @@ -74,7 +73,6 @@ #define STATUS_RING_SIZE 2048 /* 2 ports * (TX + 2*RX) */ #define STATUS_LE_BYTES (STATUS_RING_SIZE*sizeof(struct sky2_status_le)) -#define ETH_JUMBO_MTU 9000 #define TX_WATCHDOG (5 * HZ) #define NAPI_WEIGHT 64 #define PHY_RETRIES 1000 @@ -90,7 +88,7 @@ static int debug = -1; /* defaults above */ module_param(debug, int, 0); MODULE_PARM_DESC(debug, "Debug level (0=none,...,16=all)"); -static int copybreak __read_mostly = 256; +static int copybreak __read_mostly = 128; module_param(copybreak, int, 0); MODULE_PARM_DESC(copybreak, "Receive copy threshold"); @@ -803,12 +801,12 @@ static inline u32 high32(dma_addr_t a) return sizeof(a) > sizeof(u32) ? (a >> 16) >> 16 : 0; } -/* Build description to hardware about buffer */ -static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) +/* Build description to hardware for one receive segment */ +static void sky2_rx_add(struct sky2_port *sky2, u8 op, + dma_addr_t map, unsigned len) { struct sky2_rx_le *le; u32 hi = high32(map); - u16 len = sky2->rx_bufsize; if (sky2->rx_addr64 != hi) { le = sky2_next_rx(sky2); @@ -820,9 +818,52 @@ static void sky2_rx_add(struct sky2_port *sky2, dma_addr_t map) le = sky2_next_rx(sky2); le->addr = cpu_to_le32((u32) map); le->length = cpu_to_le16(len); - le->opcode = OP_PACKET | HW_OWNER; + le->opcode = op | HW_OWNER; } +/* Build description to hardware for one possibly fragmented skb */ +static void sky2_rx_submit(struct sky2_port *sky2, + const struct rx_ring_info *re) +{ + int i; + + sky2_rx_add(sky2, OP_PACKET, re->data_addr, sky2->rx_data_size); + + for (i = 0; i < skb_shinfo(re->skb)->nr_frags; i++) + sky2_rx_add(sky2, OP_BUFFER, re->frag_addr[i], PAGE_SIZE); +} + + +static void sky2_rx_map_skb(struct pci_dev *pdev, struct rx_ring_info *re, + unsigned size) +{ + struct sk_buff *skb = re->skb; + int i; + + re->data_addr = pci_map_single(pdev, skb->data, size, PCI_DMA_FROMDEVICE); + pci_unmap_len_set(re, data_size, size); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + re->frag_addr[i] = pci_map_page(pdev, + skb_shinfo(skb)->frags[i].page, + skb_shinfo(skb)->frags[i].page_offset, + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} + +static void sky2_rx_unmap_skb(struct pci_dev *pdev, struct rx_ring_info *re) +{ + struct sk_buff *skb = re->skb; + int i; + + pci_unmap_single(pdev, re->data_addr, pci_unmap_len(re, data_size), + PCI_DMA_FROMDEVICE); + + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) + pci_unmap_page(pdev, re->frag_addr[i], + skb_shinfo(skb)->frags[i].size, + PCI_DMA_FROMDEVICE); +} /* Tell chip where to start receive checksum. * Actually has two checksums, but set both same to avoid possible byte @@ -886,9 +927,7 @@ static void sky2_rx_clean(struct sky2_port *sky2) struct rx_ring_info *re = sky2->rx_ring + i; if (re->skb) { - pci_unmap_single(sky2->hw->pdev, - re->mapaddr, sky2->rx_bufsize, - PCI_DMA_FROMDEVICE); + sky2_rx_unmap_skb(sky2->hw->pdev, re); kfree_skb(re->skb); re->skb = NULL; } @@ -969,38 +1008,57 @@ static void sky2_vlan_rx_kill_vid(struct net_device *dev, unsigned short vid) #endif /* + * Allocate an skb for receiving. If the MTU is large enough + * make the skb non-linear with a fragment list of pages. + * * It appears the hardware has a bug in the FIFO logic that * cause it to hang if the FIFO gets overrun and the receive buffer * is not 64 byte aligned. The buffer returned from netdev_alloc_skb is * aligned except if slab debugging is enabled. */ -static inline struct sk_buff *sky2_alloc_skb(struct net_device *dev, - unsigned int length, - gfp_t gfp_mask) +static struct sk_buff *sky2_rx_alloc(struct sky2_port *sky2) { struct sk_buff *skb; + unsigned long p; + int i; - skb = __netdev_alloc_skb(dev, length + RX_SKB_ALIGN, gfp_mask); - if (likely(skb)) { - unsigned long p = (unsigned long) skb->data; - skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + skb = netdev_alloc_skb(sky2->netdev, sky2->rx_data_size + RX_SKB_ALIGN); + if (!skb) + goto nomem; + + p = (unsigned long) skb->data; + skb_reserve(skb, ALIGN(p, RX_SKB_ALIGN) - p); + + for (i = 0; i < sky2->rx_nfrags; i++) { + struct page *page = alloc_page(GFP_ATOMIC); + + if (!page) + goto free_partial; + skb_fill_page_desc(skb, i, page, 0, PAGE_SIZE); } return skb; +free_partial: + kfree_skb(skb); +nomem: + return NULL; } /* * Allocate and setup receiver buffer pool. - * In case of 64 bit dma, there are 2X as many list elements - * available as ring entries - * and need to reserve one list element so we don't wrap around. + * Normal case this ends up creating one list element for skb + * in the receive ring. Worst case if using large MTU and each + * allocation falls on a different 64 bit region, that results + * in 6 list elements per ring entry. + * One element is used for checksum enable/disable, and one + * extra to avoid wrap. */ static int sky2_rx_start(struct sky2_port *sky2) { struct sky2_hw *hw = sky2->hw; + struct rx_ring_info *re; unsigned rxq = rxqaddr[sky2->port]; - int i; - unsigned thresh; + unsigned i, size, space, thresh; sky2->rx_put = sky2->rx_next = 0; sky2_qset(hw, rxq); @@ -1013,27 +1071,56 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_prefetch_init(hw, rxq, sky2->rx_le_map, RX_LE_SIZE - 1); rx_set_checksum(sky2); + + /* Space needed for frame data + headers rounded up */ + size = ALIGN(sky2->netdev->mtu + ETH_HLEN + VLAN_HLEN, 8) + + 8; + + /* Stopping point for hardware truncation */ + thresh = (size - 8) / sizeof(u32); + + /* Account for overhead of skb - to avoid order > 0 allocation */ + space = SKB_DATA_ALIGN(size) + NET_SKB_PAD + + sizeof(struct skb_shared_info); + + sky2->rx_nfrags = space >> PAGE_SHIFT; + BUG_ON(sky2->rx_nfrags > ARRAY_SIZE(re->frag_addr)); + + if (sky2->rx_nfrags != 0) { + /* Compute residue after pages */ + space = sky2->rx_nfrags << PAGE_SHIFT; + + if (space < size) + size -= space; + else + size = 0; + + /* Optimize to handle small packets and headers */ + if (size < copybreak) + size = copybreak; + if (size < ETH_HLEN) + size = ETH_HLEN; + } + sky2->rx_data_size = size; + + /* Fill Rx ring */ for (i = 0; i < sky2->rx_pending; i++) { - struct rx_ring_info *re = sky2->rx_ring + i; + re = sky2->rx_ring + i; - re->skb = sky2_alloc_skb(sky2->netdev, sky2->rx_bufsize, - GFP_KERNEL); + re->skb = sky2_rx_alloc(sky2); if (!re->skb) goto nomem; - re->mapaddr = pci_map_single(hw->pdev, re->skb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_map_skb(hw->pdev, re, sky2->rx_data_size); + sky2_rx_submit(sky2, re); } - /* * The receiver hangs if it receives frames larger than the * packet buffer. As a workaround, truncate oversize frames, but * the register is limited to 9 bits, so if you do frames > 2052 * you better get the MTU right! */ - thresh = (sky2->rx_bufsize - 8) / sizeof(u32); if (thresh > 0x1ff) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_OFF); else { @@ -1041,7 +1128,6 @@ static int sky2_rx_start(struct sky2_port *sky2) sky2_write32(hw, SK_REG(sky2->port, RX_GMF_CTRL_T), RX_TRUNC_ON); } - /* Tell chip about available buffers */ sky2_write16(hw, Y2_QADDR(rxq, PREF_UNIT_PUT_IDX), sky2->rx_put); return 0; @@ -1743,15 +1829,6 @@ static void sky2_tx_timeout(struct net_device *dev) } } - -/* Want receive buffer size to be multiple of 64 bits - * and incl room for vlan and truncation - */ -static inline unsigned sky2_buf_size(int mtu) -{ - return ALIGN(mtu + ETH_HLEN + VLAN_HLEN, 8) + 8; -} - static int sky2_change_mtu(struct net_device *dev, int new_mtu) { struct sky2_port *sky2 = netdev_priv(dev); @@ -1786,7 +1863,7 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) sky2_rx_clean(sky2); dev->mtu = new_mtu; - sky2->rx_bufsize = sky2_buf_size(new_mtu); + mode = DATA_BLIND_VAL(DATA_BLIND_DEF) | GM_SMOD_VLAN_ENA | IPG_DATA_VAL(IPG_DATA_DEF); @@ -1812,9 +1889,93 @@ static int sky2_change_mtu(struct net_device *dev, int new_mtu) return err; } +/* For small just reuse existing skb for next receive */ +static struct sk_buff *receive_copy(struct sky2_port *sky2, + const struct rx_ring_info *re, + unsigned length) +{ + struct sk_buff *skb; + + skb = netdev_alloc_skb(sky2->netdev, length + 2); + if (likely(skb)) { + skb_reserve(skb, 2); + pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + memcpy(skb->data, re->skb->data, length); + skb->ip_summed = re->skb->ip_summed; + skb->csum = re->skb->csum; + pci_dma_sync_single_for_device(sky2->hw->pdev, re->data_addr, + length, PCI_DMA_FROMDEVICE); + re->skb->ip_summed = CHECKSUM_NONE; + __skb_put(skb, length); + } + return skb; +} + +/* Adjust length of skb with fragments to match received data */ +static void skb_put_frags(struct sk_buff *skb, unsigned int hdr_space, + unsigned int length) +{ + int i, num_frags; + unsigned int size; + + /* put header into skb */ + size = min(length, hdr_space); + skb->tail += size; + skb->len += size; + length -= size; + + num_frags = skb_shinfo(skb)->nr_frags; + for (i = 0; i < num_frags; i++) { + skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; + + if (length == 0) { + /* don't need this page */ + __free_page(frag->page); + --skb_shinfo(skb)->nr_frags; + } else { + size = min(length, (unsigned) PAGE_SIZE); + + frag->size = size; + skb->data_len += size; + skb->truesize += size; + skb->len += size; + length -= size; + } + } +} + +/* Normal packet - take skb from ring element and put in a new one */ +static struct sk_buff *receive_new(struct sky2_port *sky2, + struct rx_ring_info *re, + unsigned int length) +{ + struct sk_buff *skb, *nskb; + unsigned hdr_space = sky2->rx_data_size; + + pr_debug(PFX "receive new length=%d\n", length); + + /* Don't be tricky about reusing pages (yet) */ + nskb = sky2_rx_alloc(sky2); + if (unlikely(!nskb)) + return NULL; + + skb = re->skb; + sky2_rx_unmap_skb(sky2->hw->pdev, re); + + prefetch(skb->data); + re->skb = nskb; + sky2_rx_map_skb(sky2->hw->pdev, re, hdr_space); + + if (skb_shinfo(skb)->nr_frags) + skb_put_frags(skb, hdr_space, length); + else + skb_put(skb, hdr_space); + return skb; +} + /* * Receive one packet. - * For small packets or errors, just reuse existing skb. * For larger packets, get new buffer. */ static struct sk_buff *sky2_receive(struct net_device *dev, @@ -1840,40 +2001,12 @@ static struct sk_buff *sky2_receive(struct net_device *dev, if (length > dev->mtu + ETH_HLEN) goto oversize; - if (length < copybreak) { - skb = netdev_alloc_skb(dev, length + 2); - if (!skb) - goto resubmit; - - skb_reserve(skb, 2); - pci_dma_sync_single_for_cpu(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - memcpy(skb->data, re->skb->data, length); - skb->ip_summed = re->skb->ip_summed; - skb->csum = re->skb->csum; - pci_dma_sync_single_for_device(sky2->hw->pdev, re->mapaddr, - length, PCI_DMA_FROMDEVICE); - } else { - struct sk_buff *nskb; - - nskb = sky2_alloc_skb(dev, sky2->rx_bufsize, GFP_ATOMIC); - if (!nskb) - goto resubmit; - - skb = re->skb; - re->skb = nskb; - pci_unmap_single(sky2->hw->pdev, re->mapaddr, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - prefetch(skb->data); - - re->mapaddr = pci_map_single(sky2->hw->pdev, nskb->data, - sky2->rx_bufsize, PCI_DMA_FROMDEVICE); - } - - skb_put(skb, length); + if (length < copybreak) + skb = receive_copy(sky2, re, length); + else + skb = receive_new(sky2, re, length); resubmit: - re->skb->ip_summed = CHECKSUM_NONE; - sky2_rx_add(sky2, re->mapaddr); + sky2_rx_submit(sky2, re); return skb; @@ -3125,7 +3258,6 @@ static __devinit struct net_device *sky2_init_netdev(struct sky2_hw *hw, spin_lock_init(&sky2->phy_lock); sky2->tx_pending = TX_DEF_PENDING; sky2->rx_pending = RX_DEF_PENDING; - sky2->rx_bufsize = sky2_buf_size(ETH_DATA_LEN); hw->dev[port] = dev; diff --git a/drivers/net/sky2.h b/drivers/net/sky2.h index 403486a3831d..f66109a96d95 100644 --- a/drivers/net/sky2.h +++ b/drivers/net/sky2.h @@ -4,6 +4,8 @@ #ifndef _SKY2_H #define _SKY2_H +#define ETH_JUMBO_MTU 9000 /* Maximum MTU supported */ + /* PCI device specific config registers */ enum { PCI_DEV_REG1 = 0x40, @@ -1779,7 +1781,9 @@ struct tx_ring_info { struct rx_ring_info { struct sk_buff *skb; - dma_addr_t mapaddr; + dma_addr_t data_addr; + DECLARE_PCI_UNMAP_ADDR(data_size); + dma_addr_t frag_addr[ETH_JUMBO_MTU >> PAGE_SHIFT]; }; struct sky2_port { @@ -1804,7 +1808,9 @@ struct sky2_port { u16 rx_next; /* next re to check */ u16 rx_put; /* next le index to use */ u16 rx_pending; - u16 rx_bufsize; + u16 rx_data_size; + u16 rx_nfrags; + #ifdef SKY2_VLAN_TAG_USED u16 rx_tag; struct vlan_group *vlgrp;