From: Linus Walleij Date: Wed, 23 Nov 2016 22:21:17 +0000 (+0100) Subject: gpio: stmpe: fix interrupt handling bug X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1516c6350aa2770b8a5e36d40c3ec5078f92ba70;p=linux-beck.git gpio: stmpe: fix interrupt handling bug commit 43db289d00c6 ("gpio: stmpe: Rework registers access") reworked the STMPE register access so as to use [STMPE_IDX_*_LSB + i] to access the 8bit register for a certain bank, assuming the CSB and MSB will follow after the enumerator. For this to work the index needs to go from (size-1) to 0 not 0 to (size-1). However for the GPIO IRQ handler, the status registers we read register MSB + 3 bytes ahead for the 24 bit GPIOs and index registers from MSB upwards and run an index i over the registers UNLESS we are STMPE1600. This is not working when we get to clearing the interrupt EDGE status register STMPE_IDX_GPEDR_[LCM]SB: it is indexed like all other registers [STMPE_IDX_*_LSB + i] but in this loop we index from 0 to get the right bank index for the calculations, and we need to just add i to the MSB. Before this, interrupts on the STMPE2401 were broken, this patch fixes it so it works again. Cc: stable@vger.kernel.org Cc: Patrice Chotard Fixes: 43db289d00c6 ("gpio: stmpe: Rework registers access") Signed-off-by: Linus Walleij --- diff --git a/drivers/gpio/gpio-stmpe.c b/drivers/gpio/gpio-stmpe.c index e7d422a6b90b..e2e1b16a42db 100644 --- a/drivers/gpio/gpio-stmpe.c +++ b/drivers/gpio/gpio-stmpe.c @@ -413,7 +413,7 @@ static irqreturn_t stmpe_gpio_irq(int irq, void *dev) stmpe->partnum != STMPE1801) { stmpe_reg_write(stmpe, statmsbreg + i, status[i]); stmpe_reg_write(stmpe, - stmpe->regs[STMPE_IDX_GPEDR_LSB + i], + stmpe->regs[STMPE_IDX_GPEDR_MSB] + i, status[i]); } }