From: Andrew Lunn Date: Tue, 5 May 2015 23:09:49 +0000 (+0200) Subject: net: dsa: Converting remaining registers to mnemonics X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=15966a2a76f57ee45479cc3e7d28dd105f09260a;p=linux-beck.git net: dsa: Converting remaining registers to mnemonics Use defines for registers, shifts and bits in the remaining register accesses in the individual drivers, in order to aid readability. Signed-off-by: Andrew Lunn Signed-off-by: David S. Miller --- diff --git a/drivers/net/dsa/mv88e6123_61_65.c b/drivers/net/dsa/mv88e6123_61_65.c index c7c8b1e232ef..71a29a7ce538 100644 --- a/drivers/net/dsa/mv88e6123_61_65.c +++ b/drivers/net/dsa/mv88e6123_61_65.c @@ -54,7 +54,9 @@ static char *mv88e6123_61_65_probe(struct device *host_dev, int sw_addr) static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) { + u32 upstream_port = dsa_upstream_port(ds); int ret; + u32 reg; ret = mv88e6xxx_setup_global(ds); if (ret) @@ -64,18 +66,21 @@ static int mv88e6123_61_65_setup_global(struct dsa_switch *ds) * external PHYs to poll), don't discard packets with * excessive collisions, and mask all interrupt sources. */ - REG_WRITE(REG_GLOBAL, 0x04, 0x0000); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, 0x0000); /* Configure the upstream port, and configure the upstream * port as the port to which ingress and egress monitor frames * are to be sent. */ - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); + reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT; + REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); /* Disable remote management for now, and set the switch's * DSA device number. */ - REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f); return 0; } diff --git a/drivers/net/dsa/mv88e6131.c b/drivers/net/dsa/mv88e6131.c index 1a5a15bf16df..765de63f59bd 100644 --- a/drivers/net/dsa/mv88e6131.c +++ b/drivers/net/dsa/mv88e6131.c @@ -44,7 +44,9 @@ static char *mv88e6131_probe(struct device *host_dev, int sw_addr) static int mv88e6131_setup_global(struct dsa_switch *ds) { + u32 upstream_port = dsa_upstream_port(ds); int ret; + u32 reg; ret = mv88e6xxx_setup_global(ds); if (ret) @@ -55,30 +57,42 @@ static int mv88e6131_setup_global(struct dsa_switch *ds) * to arbitrate between packet queues, set the maximum frame * size to 1632, and mask all interrupt sources. */ - REG_WRITE(REG_GLOBAL, 0x04, 0x4400); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, + GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_MAX_FRAME_1632); /* Set the VLAN ethertype to 0x8100. */ - REG_WRITE(REG_GLOBAL, 0x19, 0x8100); + REG_WRITE(REG_GLOBAL, GLOBAL_CORE_TAG_TYPE, 0x8100); /* Disable ARP mirroring, and configure the upstream port as * the port to which ingress and egress monitor frames are to * be sent. */ - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1100) | 0x00f0); + reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | + GLOBAL_MONITOR_CONTROL_ARP_DISABLED; + REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); /* Disable cascade port functionality unless this device * is used in a cascade configuration, and set the switch's * DSA device number. */ if (ds->dst->pd->nr_chips > 1) - REG_WRITE(REG_GLOBAL, 0x1c, 0xf000 | (ds->index & 0x1f)); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, + GLOBAL_CONTROL_2_MULTIPLE_CASCADE | + (ds->index & 0x1f)); else - REG_WRITE(REG_GLOBAL, 0x1c, 0xe000 | (ds->index & 0x1f)); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, + GLOBAL_CONTROL_2_NO_CASCADE | + (ds->index & 0x1f)); /* Force the priority of IGMP/MLD snoop frames and ARP frames * to the highest setting. */ - REG_WRITE(REG_GLOBAL2, 0x0f, 0x00ff); + REG_WRITE(REG_GLOBAL2, GLOBAL2_PRIO_OVERRIDE, + GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP | + 7 << GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT | + GLOBAL2_PRIO_OVERRIDE_FORCE_ARP | + 7 << GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT); return 0; } diff --git a/drivers/net/dsa/mv88e6171.c b/drivers/net/dsa/mv88e6171.c index a036d0d15a13..56fad84aded6 100644 --- a/drivers/net/dsa/mv88e6171.c +++ b/drivers/net/dsa/mv88e6171.c @@ -38,6 +38,7 @@ static char *mv88e6171_probe(struct device *host_dev, int sw_addr) static int mv88e6171_setup_global(struct dsa_switch *ds) { + u32 upstream_port = dsa_upstream_port(ds); int ret; ret = mv88e6xxx_setup_global(ds); @@ -47,21 +48,36 @@ static int mv88e6171_setup_global(struct dsa_switch *ds) /* Discard packets with excessive collisions, mask all * interrupt sources, enable PPU. */ - REG_WRITE(REG_GLOBAL, 0x04, 0x6000); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, + GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS); /* Configure the upstream port, and configure the upstream * port as the port to which ingress and egress monitor frames * are to be sent. */ - if (REG_READ(REG_PORT(0), 0x03) == 0x1710) - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1111)); + if (REG_READ(REG_PORT(0), PORT_SWITCH_ID) == PORT_SWITCH_ID_6171) + REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, + upstream_port << + GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | + upstream_port << + GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | + upstream_port << + GLOBAL_MONITOR_CONTROL_ARP_SHIFT | + upstream_port << + GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT); else - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); + REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, + upstream_port << + GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | + upstream_port << + GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | + upstream_port << + GLOBAL_MONITOR_CONTROL_ARP_SHIFT); /* Disable remote management for now, and set the switch's * DSA device number. */ - REG_WRITE(REG_GLOBAL, 0x1c, ds->index & 0x1f); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL_2, ds->index & 0x1f); return 0; } diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c index 41d113749878..e9aca7f7945e 100644 --- a/drivers/net/dsa/mv88e6352.c +++ b/drivers/net/dsa/mv88e6352.c @@ -47,7 +47,9 @@ static char *mv88e6352_probe(struct device *host_dev, int sw_addr) static int mv88e6352_setup_global(struct dsa_switch *ds) { + u32 upstream_port = dsa_upstream_port(ds); int ret; + u32 reg; ret = mv88e6xxx_setup_global(ds); if (ret) @@ -56,13 +58,17 @@ static int mv88e6352_setup_global(struct dsa_switch *ds) /* Discard packets with excessive collisions, * mask all interrupt sources, enable PPU (bit 14, undocumented). */ - REG_WRITE(REG_GLOBAL, 0x04, 0x6000); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, + GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS); /* Configure the upstream port, and configure the upstream * port as the port to which ingress and egress monitor frames * are to be sent. */ - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); + reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT; + REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); /* Disable remote management for now, and set the switch's * DSA device number. diff --git a/drivers/net/dsa/mv88e6xxx.h b/drivers/net/dsa/mv88e6xxx.h index 46c5ea3801df..aafcb1a0a616 100644 --- a/drivers/net/dsa/mv88e6xxx.h +++ b/drivers/net/dsa/mv88e6xxx.h @@ -216,7 +216,15 @@ #define GLOBAL_IEEE_PRI 0x18 #define GLOBAL_CORE_TAG_TYPE 0x19 #define GLOBAL_MONITOR_CONTROL 0x1a +#define GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT 12 +#define GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT 8 +#define GLOBAL_MONITOR_CONTROL_ARP_SHIFT 4 +#define GLOBAL_MONITOR_CONTROL_MIRROR_SHIFT 0 +#define GLOBAL_MONITOR_CONTROL_ARP_DISABLED (0xf0) #define GLOBAL_CONTROL_2 0x1c +#define GLOBAL_CONTROL_2_NO_CASCADE 0xe000 +#define GLOBAL_CONTROL_2_MULTIPLE_CASCADE 0xf000 + #define GLOBAL_STATS_OP 0x1d #define GLOBAL_STATS_OP_BUSY BIT(15) #define GLOBAL_STATS_OP_NOP (0 << 12) @@ -259,6 +267,10 @@ #define GLOBAL2_SWITCH_MAC_BUSY BIT(15) #define GLOBAL2_ATU_STATS 0x0e #define GLOBAL2_PRIO_OVERRIDE 0x0f +#define GLOBAL2_PRIO_OVERRIDE_FORCE_SNOOP BIT(7) +#define GLOBAL2_PRIO_OVERRIDE_SNOOP_SHIFT 4 +#define GLOBAL2_PRIO_OVERRIDE_FORCE_ARP BIT(3) +#define GLOBAL2_PRIO_OVERRIDE_ARP_SHIFT 0 #define GLOBAL2_EEPROM_OP 0x14 #define GLOBAL2_EEPROM_OP_BUSY BIT(15) #define GLOBAL2_EEPROM_OP_LOAD BIT(11)