From: Vladimir Kondratiev Date: Tue, 8 Apr 2014 08:36:16 +0000 (+0300) Subject: wil6210: fix printouts for better readability X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=15e23124cea7315a5bef1c60f8368af035cd06c5;p=linux-beck.git wil6210: fix printouts for better readability Reshuffle prints to consolidate firmware/hardware information report upon card init Convert print for unhandled MISC ISR bits to "debug" - it is normal situation and not an "error" Signed-off-by: Vladimir Kondratiev Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/wil6210/interrupt.c b/drivers/net/wireless/ath/wil6210/interrupt.c index 5824cd41e4ba..73593aa3cd98 100644 --- a/drivers/net/wireless/ath/wil6210/interrupt.c +++ b/drivers/net/wireless/ath/wil6210/interrupt.c @@ -338,7 +338,7 @@ static irqreturn_t wil6210_irq_misc_thread(int irq, void *cookie) } if (isr) - wil_err(wil, "un-handled MISC ISR bits 0x%08x\n", isr); + wil_dbg_irq(wil, "un-handled MISC ISR bits 0x%08x\n", isr); wil->isr_misc = 0; diff --git a/drivers/net/wireless/ath/wil6210/main.c b/drivers/net/wireless/ath/wil6210/main.c index 95f4efe9ef37..1b265fd19de2 100644 --- a/drivers/net/wireless/ath/wil6210/main.c +++ b/drivers/net/wireless/ath/wil6210/main.c @@ -363,8 +363,8 @@ static int wil_wait_for_fw_ready(struct wil6210_priv *wil) wil_err(wil, "Firmware not ready\n"); return -ETIME; } else { - wil_dbg_misc(wil, "FW ready after %d ms\n", - jiffies_to_msecs(to-left)); + wil_info(wil, "FW ready after %d ms. HW version 0x%08x\n", + jiffies_to_msecs(to-left), wil->hw_version); } return 0; } diff --git a/drivers/net/wireless/ath/wil6210/pcie_bus.c b/drivers/net/wireless/ath/wil6210/pcie_bus.c index f1e1bb338d68..066088418307 100644 --- a/drivers/net/wireless/ath/wil6210/pcie_bus.c +++ b/drivers/net/wireless/ath/wil6210/pcie_bus.c @@ -74,8 +74,6 @@ static int wil_if_pcie_enable(struct wil6210_priv *wil) if (rc) goto release_irq; - wil_info(wil, "HW version: 0x%08x\n", wil->hw_version); - return 0; release_irq: diff --git a/drivers/net/wireless/ath/wil6210/wmi.c b/drivers/net/wireless/ath/wil6210/wmi.c index 2ba56eef0c45..b7764f35ab61 100644 --- a/drivers/net/wireless/ath/wil6210/wmi.c +++ b/drivers/net/wireless/ath/wil6210/wmi.c @@ -192,7 +192,7 @@ static int __wmi_send(struct wil6210_priv *wil, u16 cmdid, void *buf, u16 len) might_sleep(); if (!test_bit(wil_status_fwready, &wil->status)) { - wil_err(wil, "FW not ready\n"); + wil_err(wil, "WMI: cannot send command while FW not ready\n"); return -EAGAIN; } @@ -276,8 +276,8 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) wil->fw_version = le32_to_cpu(evt->sw_version); wil->n_mids = evt->numof_additional_mids; - wil_dbg_wmi(wil, "FW ver. %d; MAC %pM; %d MID's\n", wil->fw_version, - evt->mac, wil->n_mids); + wil_info(wil, "FW ver. %d; MAC %pM; %d MID's\n", wil->fw_version, + evt->mac, wil->n_mids); if (!is_valid_ether_addr(ndev->dev_addr)) { memcpy(ndev->dev_addr, evt->mac, ETH_ALEN); @@ -290,7 +290,7 @@ static void wmi_evt_ready(struct wil6210_priv *wil, int id, void *d, int len) static void wmi_evt_fw_ready(struct wil6210_priv *wil, int id, void *d, int len) { - wil_dbg_wmi(wil, "WMI: FW ready\n"); + wil_dbg_wmi(wil, "WMI: got FW ready event\n"); set_bit(wil_status_fwready, &wil->status); /* reuse wmi_ready for the firmware ready indication */