From: Jarkko Nikula Date: Tue, 15 Sep 2015 13:26:20 +0000 (+0300) Subject: spi: omap-uwire: Remove needless bits_per_word and speed_hz tests X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=160f8d0691659b65a97494c151c95b1287c377ae;p=linux-beck.git spi: omap-uwire: Remove needless bits_per_word and speed_hz tests SPI core validates both bits_per_word and speed_hz transfer parameters and defaults to spi->bits_per_word and spi->max_speed_hz in case these per transfer parameters are not set. This allows to remove two needless tests from uwire_txrx() and uwire_setup_transfer(). Signed-off-by: Jarkko Nikula Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi-omap-uwire.c b/drivers/spi/spi-omap-uwire.c index 55576db31549..ce8dbdbce312 100644 --- a/drivers/spi/spi-omap-uwire.c +++ b/drivers/spi/spi-omap-uwire.c @@ -205,7 +205,7 @@ static void uwire_chipselect(struct spi_device *spi, int value) static int uwire_txrx(struct spi_device *spi, struct spi_transfer *t) { unsigned len = t->len; - unsigned bits = t->bits_per_word ? : spi->bits_per_word; + unsigned bits = t->bits_per_word; unsigned bytes; u16 val, w; int status = 0; @@ -344,9 +344,10 @@ static int uwire_setup_transfer(struct spi_device *spi, struct spi_transfer *t) /* assume it's already enabled */ rate = clk_get_rate(uwire->ck); - hz = spi->max_speed_hz; - if (t != NULL && t->speed_hz) + if (t != NULL) hz = t->speed_hz; + else + hz = spi->max_speed_hz; if (!hz) { pr_debug("%s: zero speed?\n", dev_name(&spi->dev));