From: Hans de Goede Date: Thu, 10 Mar 2016 21:38:03 +0000 (+0100) Subject: ARM: dts: sun5i-a13-empire-electronix-d709: Remove mmc2 node X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=163172c08af685667199c293b8dc66705eb7430c;p=linux-beck.git ARM: dts: sun5i-a13-empire-electronix-d709: Remove mmc2 node The empire-electronix-d709 does not have an emmc, it uses nand, the mmc2 node in the dts comes from a copy and paste error from the inet98fv2 dts, remove it. While at it also do s/inet98fv2/d709/ to fix some other copy/paste leftovers. Signed-off-by: Hans de Goede Signed-off-by: Maxime Ripard --- diff --git a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts index 7fbb0b0558a9..6efbba6d40a9 100644 --- a/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts +++ b/arch/arm/boot/dts/sun5i-a13-empire-electronix-d709.dts @@ -123,7 +123,7 @@ &mmc0 { pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_inet98fv2>; + pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_d709>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ @@ -131,27 +131,12 @@ status = "okay"; }; -&mmc2 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc2_pins_a>; - vmmc-supply = <®_vcc3v3>; - bus-width = <8>; - non-removable; - status = "okay"; - - mmccard: mmccard@0 { - reg = <0>; - compatible = "mmc-card"; - broken-hpi; - }; -}; - &otg_sram { status = "okay"; }; &pio { - mmc0_cd_pin_inet98fv2: mmc0_cd_pin@0 { + mmc0_cd_pin_d709: mmc0_cd_pin@0 { allwinner,pins = "PG0"; allwinner,function = "gpio_in"; allwinner,drive = ;