From: Tomi Valkeinen Date: Wed, 3 Sep 2014 19:25:49 +0000 (+0000) Subject: drm/omap: fix encoder-crtc mapping X-Git-Tag: v4.1-rc1~69^2~15^2~21 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=173372975457ca0fa0acddf60d087976bacb6ab3;p=karo-tx-linux.git drm/omap: fix encoder-crtc mapping OMAP DSS hardware supports changing the output port to which an overlay manager's video stream goes. For example, DPI video stream can come from any of the four overlay managers on OMAP5. However, as it's difficult to manage the change in the driver, the omapdss driver does not support that at the moment, and has a hardcoded overlay manager per output. omapdrm, on the other hand, uses the hardware features to find out which overlay manager to use for an output, which causes problems. For example, on OMAP5, omapdrm tries to use DIGIT overlay manager for DPI output, instead of the LCD3 required by the omapdss driver. This patch changes the omapdrm to use the omapdss driver's hardcoded overlay managers, which fixes the issue. Signed-off-by: Tomi Valkeinen --- diff --git a/drivers/gpu/drm/omapdrm/omap_drv.c b/drivers/gpu/drm/omapdrm/omap_drv.c index 5eab83d7de15..b71a443e671e 100644 --- a/drivers/gpu/drm/omapdrm/omap_drv.c +++ b/drivers/gpu/drm/omapdrm/omap_drv.c @@ -298,14 +298,13 @@ static int omap_modeset_init(struct drm_device *dev) for (id = 0; id < priv->num_crtcs; id++) { struct drm_crtc *crtc = priv->crtcs[id]; enum omap_channel crtc_channel; - enum omap_dss_output_id supported_outputs; crtc_channel = omap_crtc_channel(crtc); - supported_outputs = - dss_feat_get_supported_outputs(crtc_channel); - if (supported_outputs & output->id) + if (output->dispc_channel == crtc_channel) { encoder->possible_crtcs |= (1 << id); + break; + } } omap_dss_put_device(output);