From: Tomi Valkeinen Date: Fri, 31 May 2013 07:37:52 +0000 (+0300) Subject: ARM: OMAP: fix dsi regulator names X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=1738ddbe5bbf145c34d8d0d10661ffbdf9b23f2b;p=linux-beck.git ARM: OMAP: fix dsi regulator names board-cm-t35.c and board-ldp.c contain regulator supply entries for vdds_dsi. However, the given device name is wrong. This patch fixes the device name from omapdss_dsi1 to omapdss_dsi.0. Note that as far as I know, DSI driver is not used on these boards, so this should not have caused any problems. The DSI block can be used to generate clock for DPI, though, but that's not enabled for omap3 boards currently. Signed-off-by: Tomi Valkeinen Signed-off-by: Tony Lindgren --- diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index ee6218c74807..ce009681dce5 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -293,7 +293,7 @@ static struct regulator_consumer_supply cm_t35_vsim_supply[] = { static struct regulator_consumer_supply cm_t35_vio_supplies[] = { REGULATOR_SUPPLY("vcc", "spi1.0"), REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; /* VMMC1 for MMC1 pins CMD, CLK, DAT0..DAT3 (20 mA, plus card == max 220 mA) */ diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index d0d17bc58d9b..3dbc881cdc3b 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -272,7 +272,7 @@ static struct regulator_init_data ldp_vaux1 = { static struct regulator_consumer_supply ldp_vpll2_supplies[] = { REGULATOR_SUPPLY("vdds_dsi", "omapdss"), - REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi.0"), }; static struct regulator_init_data ldp_vpll2 = {