From: Hans Holmberg Date: Fri, 3 Feb 2017 14:29:12 +0000 (+0100) Subject: regulator: gpio: correct default type X-Git-Tag: v4.11-rc1~154^2~5^4 X-Git-Url: https://git.karo-electronics.de/?a=commitdiff_plain;h=17db9f386632c9c9182a3318b89b742be08c1c2a;p=karo-tx-linux.git regulator: gpio: correct default type The driver defaults to voltage, not current, type so correct this in the device tree binding documentation. Signed-off-by: Hans Holmberg Signed-off-by: Mark Brown --- diff --git a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt index e5cac1e0ca8a..dd1ed789728e 100644 --- a/Documentation/devicetree/bindings/regulator/gpio-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/gpio-regulator.txt @@ -13,7 +13,7 @@ Optional properties: - startup-delay-us : Startup time in microseconds. - enable-active-high : Polarity of GPIO is active high (default is low). - regulator-type : Specifies what is being regulated, must be either - "voltage" or "current", defaults to current. + "voltage" or "current", defaults to voltage. Any property defined as part of the core regulator binding defined in regulator.txt can also be used.